Calculation and Analysis of Transformer No Load over Excitation Current Based on Magnetic Circuit-circuit Coupling Model

Author(s):  
Ziqiang Tian
2020 ◽  
Vol 64 (1-4) ◽  
pp. 969-975
Author(s):  
Hiroaki Kikuchi ◽  
Yuki Sato

We investigated effects of contact gap on magnetic nondestructive evaluation technique using a magnetic single-yoke probe. Firstly, we evaluated hysteresis curves and impedance related to permeability of the material measured by a single-yoke probe, when an air gap length between the probe and specimens changes. The hysteresis curve gradually inclines to the axis of the magneto-motive force and magneto-motive force at which the magnetic flux is 0 decreases with increasing the gap length. The effective permeability also decreases with increasing the gap thickness. The incremental of gap thickness increases the reluctance inside the magnetic circuit composed of the yoke, specimen and gap, which results in the reduction of flux applying to specimen.


2020 ◽  
Vol 64 (1-4) ◽  
pp. 1337-1345
Author(s):  
Chuan Zhao ◽  
Feng Sun ◽  
Junjie Jin ◽  
Mingwei Bo ◽  
Fangchao Xu ◽  
...  

This paper proposes a computation method using the equivalent magnetic circuit to analyze the driving force for the non-contact permanent magnet linear drive system. In this device, the magnetic driving force is related to the rotation angle of driving wheels. The relationship is verified by finite element analysis and measuring experiments. The result of finite element simulation is in good agreement with the model established by the equivalent magnetic circuit. Then experiments of displacement control are carried out to test the dynamic characteristic of this system. The controller of the system adopts the combination control of displacement and angle. The results indicate that the system has good performance in steady-state error and response speed, while the maximum overshoot needs to be reduced.


Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  

Abstract Carpenter 430FR Solenoid Quality stainless steel is a ferritic chromium-iron alloy developed especially for A.C. and D.C. magnetic circuit applications such as solenoid valve core components and electromagnetic relay cores. The electrical resistivity of 430FR is approximately 25% higher than other commercially available 430F stainless. Increased electrical resistivity provides better performance of magnetic components, particularly at power frequencies and high magnetic flux density. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-337. Producer or source: Carpenter.


Author(s):  
Teruhisa Komatsu ◽  
Teruhisa Komatsu ◽  
Shuji Sasa ◽  
Shuji Sasa ◽  
Shigeru Montani ◽  
...  

Rias-type bays are one of the most common coasts in Japan where aquacultures have been active due to sheltered geological shape with a deep bottom. The huge tsunami hit Sanriku Coast consisting of open rias-type bays near the epicenter facing Pacific Ocean on 11 March 2011. For recovering Sanriku Coast, it is important to include sustainability in its program. Satoumi is defined as the human use and management of coastal seas for high productivity while maintaining high biodiversity. Therefore, we proposed Satoumi approach to an open rias-type bay, Shizugawa Bay, in southern Sanriku Coast. We conducted scientific researches on mapping of coastal habitats and aquaculture facilities, hydrography, and material flows of nutrients, a minor element (Fe) and organic matters in the bay including those from the rivers and from the offshore waters. At the same time, Committee for Shizugawa Bay Management of Fishermen’s Cooperative of Miyagi Prefecture decided to decrease in aquaculture facilities for sustainable development of aquaculture. Based on these data, a physical-biological coupling model was used for calculating the number of aquaculture facilities that are suitable not only for yields but also for environments. These researches were established on strong collaborations among a fishermen’s’ cooperative, local governments and scientists. Results of this practice may help to realize sustainable coastal use of a rias-type bay.


1988 ◽  
Vol 53 (6) ◽  
pp. 1134-1140
Author(s):  
Martin Breza ◽  
Peter Pelikán

It is suggested that for some transition metal hexahalo complexes, the Eg-(a1g + eg) vibronic coupling model is better suited than the classical T2g-(a1g + eg) model. For the former, alternative model, the potential constants in the analytical formula are evaluated from the numerical map of the adiabatic potential surface by using the linear regression method. The numerical values for 29 hexahalo complexes of the 1st row transition metals are obtained by the CNDO/2 method. Some interesting trends of parameters of such Jahn-Teller-active systems are disclosed.


Sign in / Sign up

Export Citation Format

Share Document