The Innovation Design of the Centrifugal Grinding Machine

2008 ◽  
Author(s):  
Hai-Xia Zhao ◽  
Ji-Qing Xu ◽  
Shou-Cheng Wang
Keyword(s):  
Grinding Machine

CALCULATION OSCILLATIONS OF VARIOUS ELEMENTS OF THE ELASTIC SYSTEM OF THE CENTER-FREE GRINDING MACHINE SASL 5AD

2020 ◽  
pp. 160-165
Author(s):  
Джугурян Т.Г. ◽  
Марчук В.І. ◽  
Марчук І. В.
Keyword(s):  
Horizontal Plane ◽  
Natural Frequencies ◽  
Elastic System ◽  
Experimental Studies ◽  
Piezoelectric Sensors ◽  
Forced Oscillations ◽  
Method Of Calculation ◽  
Vibration Resistance ◽  
Grinding Machine ◽  
Experimental Researches

During the design of operations of centerless intermittent grinding of surfaces there is a need to identify the natural frequencies of oscillations of the elements of the technological system of grinding. The method of calculation of rigidity, vibration resistance and forced oscillations of the elements of the circular grinding machine is offered in the article. Carrying out of experimental researches of rigidity of elastic system of the SASL 5AD grinding machine. We conducted preliminary experimental studies to measure the oscillations of various elements of the elastic system of the SASL 5AD grinding machine in the horizontal plane by piezoelectric sensors during grinding with continuous and discontinuous circles with different geometric parameters.

A Precision Grinding Machine for Diffusion Studies

1954 ◽  
Vol 25 (9) ◽  
pp. 865-868 ◽  
Author(s):  
Harry Letaw ◽  
Lawrence M. Slifkin ◽  
William M. Portnoy
Keyword(s):  
Precision Grinding ◽  
Diffusion Studies ◽  
Grinding Machine

Calculation of Effective Ground Depth of Cut by Means of Grinding Process Model

2011 ◽  
Vol 496 ◽  
pp. 7-12 ◽  
Author(s):  
Takazo Yamada ◽  
Michael N. Morgan ◽  
Hwa Soo Lee ◽  
Kohichi Miura
Keyword(s):  
Process Model ◽  
Ground Surface ◽  
Depth Of Cut ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Wheel Wear ◽  
Elastic Deformations ◽  
Proposed Model ◽  
Effective Depth ◽  
Grinding Machine

In order to obtain the effective depth of cut on the ground surface, a new grinding process model taking into account thermal expansions of the grinding wheel and the workpiece, elastic deformations of the grinding machine, the grinding wheel and the workpiece and the wheel wear was proposed. Using proposed model, the effective depth of cut was calculated using measured results of the applied depth of cut and the normal grinding force.

Experiment Research on the Temperature Field and Thermal Error Distribution of NC Grinding Machine

2009 ◽  
Vol 76-78 ◽  
pp. 61-66
Author(s):  
Ya Dong Gong ◽  
Yan Guang Bai ◽  
Yue Ming Liu ◽  
Jian Qiu
Keyword(s):  
Mathematical Model ◽  
Temperature Field ◽  
Infrared Camera ◽  
Thermal Error ◽  
Error Distribution ◽  
Measurement Technology ◽  
Actual Error ◽  
Grinding Machine ◽  
The Mathematical Model ◽  
Nc Grinding

With the help of the infrared camera temperature measurement technology, the systemic theoretical analysis and experimental research for temperature field and thermal error distribution in NC grinding machine is provided. Two different situations for temperature field and thermal error distribution are respectively measured while the free and loaded grinding by the new measurement method. The mathematical model of thermal error is built, and it shows that the actual error and the forecasted error from thermal error mathematical model have good comparability.

The Finite Element Analysis and Optimization for the Grinder Based on the Joint Surface

2013 ◽  
Vol 281 ◽  
pp. 165-169 ◽  
Author(s):  
Xiang Lei Zhang ◽  
Bin Yao ◽  
Wen Chang Zhao ◽  
Ou Yang Kun ◽  
Bo Shi Yao
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Element Model ◽  
Joint Surface ◽  
Weak Links ◽  
Response Analysis ◽  
Element Analysis ◽  
Static And Dynamic Analysis ◽  
Harmonic Response Analysis ◽  
Grinding Machine

Establish the finite element model for high precision grinding machine which takes joint surface into consideration and then carrys out the static and dynamic analysis of the grinder. After the static analysis, modal analysis and harmonic response analysis, the displacement deformation, stress, natural frequency and vibration mode could be found, which also helps find the weak links out. The improvement scheme which aims to increase the stiffness and precision of the whole machine has proposed to efficiently optimize the grinder. And the first natural frequency of the optimized grinder has increased by 68.19%.

Study on Grinding Technology of Electrical Discharge Grinding of Curve Edge Polycrystalline Diamond

2006 ◽  
Vol 304-305 ◽  
pp. 206-209 ◽  
Author(s):  
Gang Liu ◽  
Ming Chen ◽  
Z.G. Hu ◽  
X.F. Zhu ◽  
H. Xu ◽  
...  
Keyword(s):  
Surface Quality ◽  
Electrical Discharge ◽  
High Efficiency ◽  
Practical Significance ◽  
Cnc System ◽  
Milling Cutter ◽  
Curve Edge ◽  
Grinding Machine ◽  
Five Axis ◽  
Pcd Tools

PCD tools, especially curve edge PCD compound tools are used widely in machining nonferrous and non-metal materials with high efficiency and precision because of their excellent cutting properties. But high quality grinding of PCD tools is the uppermost obstacle in application because there are great difficulties to profile and sharpen edge in grinding, especially for milling cutter and drill with curve edge. This paper studied technology of wire EDG curve edge PCD compound tools by wire electrical discharge grinding machine with five-axis CNC system. The grinding quality was evaluated by scanning electron microscope (SEM) and roughometer. Three steps processing technique (roughing, finishing and fine finishing) and optimal process parameters of wire EDG PCD tools were recommended after considering synthetically the surface quality, precision and machining efficiency. The results met the requirement of high surface quality, precision and efficiency. This paper also applied successfully the optimal technology to grind a PCD milling cutter with outer and inner blade by electrical discharge grinding machine with five-axis CNC system. By the optimal parameters, the process yielded high precision of ±4.3µm and low roughness of 0.30µm. Experiment results have great practical significance to the high precise and efficient wire EDG of PCD tools.

Sign in / Sign up

Export Citation Format

Share Document