Thermal treatment of MSWI fly ash with different additives by microwave heating

Author(s):  
Sun-Yu Chou ◽  
Shang-Lien Lo ◽  
Nien-Hsun Li
2018 ◽  
Vol 73 ◽  
pp. 381-391 ◽  
Author(s):  
Florian Huber ◽  
Hannes Herzel ◽  
Christian Adam ◽  
Ole Mallow ◽  
Dominik Blasenbauer ◽  
...  

2012 ◽  
Vol 138 (6) ◽  
pp. 632-636 ◽  
Author(s):  
Jing-Dong Chou ◽  
Shih-Hsien Chang ◽  
Chiou-Liang Lin ◽  
Jia-Hong Kuo ◽  
Ming-Yen Wey

2013 ◽  
Vol 34 (2) ◽  
pp. 2795-2801 ◽  
Author(s):  
Hongyun Hu ◽  
Guangqian Luo ◽  
Huan Liu ◽  
Yu Qiao ◽  
Minghou Xu ◽  
...  

Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 131
Author(s):  
Facun Jiao ◽  
Xulong Ma ◽  
Tao Liu ◽  
Chengli Wu ◽  
Hanxu Li ◽  
...  

The vaporization behaviors of eight heavy metals (Pb, Zn, Cu, Cd, Cr, Co, Mn, and Ni) in municipal solid wastes incineration (MSWI) fly ash during thermal treatment under air atmosphere (21% O2/79% N2), an inert atmosphere (100% N2), and a reducing atmosphere (50% CO/50% N2) were evaluated based on a thermodynamic equilibrium calculation by FactSage 8.1. The results show that the reducing atmosphere promotes the melting of MSWI fly ash, resulting in a more liquid phase than in air or an inert atmosphere. Except for Cd, the formation of liquids can dissolve heavy metals and reduce their vaporization ratio. In the air and inert atmospheres, Pb, Zn, Cu, Co, Mn, and Ni vaporize mainly in the form of metallic chlorides, while Cd volatilizes in the form of metallic Cd (g) and CdO (g). In the reducing atmosphere, Co, Mn, and Ni still vaporize as chlorides. Zn and Cd mainly vaporize in the form of Zn (g) and Cd (g), respectively. In terms of Pb, in addition to its chlorides, the volatiles of Pb contain some Pb (g) and PbS (g). Cr has a low vaporization ratio, accounting for 2.4% of the air atmosphere. Cr, on the other hand, readily reacts with Ca to form water-soluble CrCaO4, potentially increasing Cr leaching. Except for Cd, the results of this study suggest that the reducing atmosphere is used for the thermal treatment of MSWI fly ash because it promotes the melting of fly ash and thus prevents heavy metal vaporization.


2020 ◽  
Vol 88 ◽  
pp. 112-121 ◽  
Author(s):  
Kaixing Zhao ◽  
Yuyan Hu ◽  
Yuyi Tian ◽  
Dezhen Chen ◽  
Yuheng Feng

OCL ◽  
2019 ◽  
Vol 26 ◽  
pp. 32 ◽  
Author(s):  
Zhana Petkova ◽  
Ginka Antova

Current paper reveals the impact of thermal treatment on the quality of two seed oils – pumpkin and melon compared to the quality of the most used oil – sunflower oil. Conventional and microwave heating were used for processing the oils. The duration of the thermal treatment was 9, 12 and 18 min for the conventional heating. The microwave heating was performed with two microwave powers of the equipment (600 W and 900 W) for 3, 6, 9 and 12 min. At every stage of the thermal processing were determined acid and peroxide value, the absorbance of the oils at 232 and 268 nm, tocopherol and fatty acid composition. It was observed that the degree of oxidation of the examined oils during microwave and conventional heating increased with the duration of the thermal process and the power of the microwaves. Also, the two methods of heating had a little impact on the processes leading to the formation of free fatty acids. Total tocopherols of the melon seed oil were more stable to thermal treatment. The amount of linoleic acid decreased in the pumpkin and sunflower oils during microwave treatment, while that of oleic and palmitic acid relatively increased. The biggest change in the fatty acid composition of both oils was found during microwave heating at 900W. The changes in fatty acid composition of thermally treated melon seed oil were insignificant. Overall, melon seed oil was observed to be more thermally stable than pumpkin and sunflower oils.


2021 ◽  
pp. 0734242X2110039
Author(s):  
Huan Wang ◽  
Fenfen Zhu ◽  
Xiaoyan Liu ◽  
Meiling Han ◽  
Rongyan Zhang

This mini-review article summarizes the available technologies for the recycling of heavy metals (HMs) in municipal solid waste incineration (MSWI) fly ash (FA). Recovery technologies included thermal separation (TS), chemical extraction (CE), bioleaching, and electrochemical processes. The reaction conditions of various methods, the efficiency of recovering HMs from MSWI FA and the difficulties and solutions in the process of technical development were studied. Evaluation of each process has also been done to determine the best HM recycling method and future challenges. Results showed that while bioleaching had minimal environmental impact, the process was time-consuming. TS and CE were the most mature technologies, but the former process was not cost-effective. Overall, it has the greatest economic potential to recover metals by CE with scrubber liquid produced by a wet air pollution control system. An electrochemical process or solvent extraction could then be applied to recover HMs from the enriched leachate. Ongoing development of TS and bioleaching technologies could reduce the treatment cost or time.


Sign in / Sign up

Export Citation Format

Share Document