Design of Low Supply Voltage Phase Locked Loop Based on Dynamic Double Loops Technology

2021 ◽  
Author(s):  
Chao Zhao ◽  
Hao Zhang ◽  
Youming Zhang
Keyword(s):  
Supply Voltage ◽  
Phase Locked Loop ◽  
Voltage Phase ◽  
Low Supply Voltage

A new erasing and row decoding scheme for low supply voltage operation 16-Mb/64-Mb flash memories

1992 ◽  
Vol 27 (4) ◽  
pp. 583-588 ◽  
Author(s):  
Y. Miyawaki ◽  
T. Nakayama ◽  
S. Kobayashi ◽  
N. Ajika ◽  
M. Ohi ◽  
...  
Keyword(s):  
Supply Voltage ◽  
Flash Memories ◽  
Low Supply Voltage

Design and analysis of a low noise CMOS charge pump phase locked loop circuit

2021 ◽  
pp. 2140002
Author(s):  
Yanbo Chen ◽  
Shubin Zhang
Keyword(s):  
Phase Noise ◽  
Supply Voltage ◽  
Charge Pump ◽  
Phase Locked Loop ◽  
Low Noise ◽  
Cmos Process ◽  
Voltage Controlled Oscillator ◽  
Output Frequency ◽  
Power Supply Voltage ◽  
Supply Noise

Phase Locked Loop (PLL) circuit plays an important part in electronic communication system in providing high-frequency clock, recovering the clock from data signal and so on. The performance of PLL affects the whole system. As the frequency of PLL increases, designing a PLL circuit with lower jitter and phase noise becomes a big challenge. To suppress the phase noise, the optimization of Voltage Controlled Oscillator (VCO) is very important. As the power supply voltage degrades, the VCO becomes more sensitive to supply noise. In this work, a three-stage feedforward ring VCO (FRVCO) is designed and analyzed to increase the output frequency. A novel supply-noise sensing (SNS) circuit is proposed to suppress the supply noise’s influence on output frequency. Based on these, a 1.2 V 2 GHz PLL circuit is implemented in 110 nm CMOS process. The phase noise of this CMOS charge pump (CP) PLL is 117 dBc/Hz@1 MHz from test results which proves it works successfully in suppressing phase noise.

A 12-BIT 400-MS/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

2014 ◽  
Vol 23 (01) ◽  
pp. 1450004 ◽  
Author(s):  
XIAOBO XUE ◽  
XIAOLEI ZHU ◽  
QIFENG SHI ◽  
LENIAN HE
Keyword(s):  
Dynamic Range ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Signal Frequency ◽  
Current Steering ◽  
Digital To Analog Converter ◽  
Measurement Results ◽  
Voltage Swing ◽  
Current Steering Dac ◽  
Low Supply Voltage

In this paper, a 12-bit current-steering digital-to-analog converter (DAC) employing a deglitching technique is proposed. The deglitching technique is realized by lowering the voltage swing of the control signal as well as by using a method of glitch counteraction (GC). A new switch–driver structure is designed to enable the effectiveness of the GC and provide sufficient driving capability under a low supply voltage. Moreover, the control signal's rise/fall asymmetry which increases the glitch error can be suppressed by using the proposed switch–driver structure. The 12-bit DAC is implemented in 180 nm CMOS technology. The measurement results show that the spurious free dynamic range (SFDR) at low signal frequency is 78.8 dB, and it is higher than 70 dB up to 60 MHz signal frequency at 400 MS/s. The measured INL and DNL are both less than ±0.6 LSB.

Sign in / Sign up

Export Citation Format

Share Document