Low-power consumption beacon recognition method to access wireless sensor networks

Author(s):  
Soonyong Song ◽  
Ingook Jang ◽  
Donghun Lee ◽  
Jinchul Choi ◽  
Youngsung Son
2021 ◽  
Vol 7 ◽  
pp. e780
Author(s):  
Mostafa Ibrahim Labib ◽  
Mohamed ElGazzar ◽  
Atef Ghalwash ◽  
Sarah Nabil AbdulKader

Wireless sensor networks connect a set of highly flexible wireless devices with small weight and size. They are used to monitor and control the environment by organizing the acquired data at a central device. Constructing fully connected networks using low power consumption sensors, devices, and protocols is one of the main challenges facing wireless sensor networks, especially in places where it is difficult to establish wireless networks in a normal way, such as military areas, archaeological sites, agricultural districts, construction sites, and so on. This paper proposes an approach for constructing and extending Bi-Directional mesh networks using low power consumption technologies inside various indoors and outdoors architectures called “an adaptable Spider-Mesh topology”. The use of ESP-NOW protocol as a communication technology added an advantage of longer communication distance versus a slight increase of consumed power. It provides 15 times longer distance compared to BLE protocol while consuming only twice as much power. Therefore, according to our theoretical and experimental comparisons, the proposed approach could provide higher network coverage while maintaining an acceptable level of power consumption.


Author(s):  
Mehdi Amiri Nasab ◽  
Shahaboddin Shamshirband ◽  
Anthony Theodore Chronopoulos ◽  
Amir Mosavi ◽  
Narjes Nabipur

The radio operation in wireless sensor networks (WSN) in the Internet of Things (IoT) applications are the most common source for power consumption. However, recognizing and controlling the factors affecting radio operation can be valuable for managing the node power consumption. ContikiMAC is a low-power Radio Duty-Cycle protocol in Contiki OS used in WakeUp mode, which is a clear channel assessment (CCA) to check radio status periodically. The time spent to check the radio is of utmost importance for monitoring power consumption. It can lead to false WakeUp or idle listening in Radio Duty-Cycles and ContikiMAC. This paper presents a detailed analysis of radio WakeUp time factors of ContikiMAC. Then, we propose lightweight CCA (LW-CCA) as an extension to ContikiMAC to reduce the percentage of Radio Duty-Cycles in false WakeUps and idle listenings by using dynamic received signal strength indicators (RSSI) status check time. The simulation results in the Cooja simulator show that LW-CCA reduces about 8% energy consumption in nodes while maintaining up to 99% of the packet delivery rate (PDR).


Author(s):  
Maytham Safar ◽  
Hasan Al-Hamadi ◽  
Dariush Ebrahimi

Wireless sensor networks (WSN) have emerged in many applications as a platform to collect data and monitor a specified area with minimal human intervention. The initial deployment of WSN sensors forms a network that consists of randomly distributed devices/nodes in a known space. Advancements have been made in low-power micro-electronic circuits, which have allowed WSN to be a feasible platform for many applications. However, there are two major concerns that govern the efficiency, availability, and functionality of the network—power consumption and fault tolerance. This paper introduces a new algorithm called Power Efficient Cluster Algorithm (PECA). The proposed algorithm reduces the power consumption required to setup the network. This is accomplished by effectively reducing the total number of radio transmission required in the network setup (deployment) phase. As a fault tolerance approach, the algorithm stores information about each node for easier recovery of the network should any node fail. The proposed algorithm is compared with the Self Organizing Sensor (SOS) algorithm; results show that PECA consumes significantly less power than SOS.


Sign in / Sign up

Export Citation Format

Share Document