Dual low pass filter-based voltage sag detection for voltage sag compensator under distorted grid voltages

Author(s):  
Yutthachai Sillapawicharn ◽  
Yuttana Kumsuwan
Author(s):  
Shuiqiang Pei ◽  
Xiaoguang Hu ◽  
Guofeng Zhang ◽  
Li Fu

Real-time and accurate detection of the voltage sag characteristics is the premise to achieve dynamic voltage restorer compensation. An improved αβ-dq transformation detection method is presented for the limitations of traditional detection methods. In this method, the α-axis component of the αβ static coordinate system is deduced according to the single-phase voltage. The virtual β-axis component is constructed from the derivative of the α-axis component. The magnitudes, duration, phase-angle jump of the voltage sag are detected quickly and accurately by αβ-dq transformation and low-pass filter. The original data is real-time, which ensures faster detection response speed and reduces the computation greatly. In addition, an optimization design method for digital low-pass filter is presented against the contradictions existing in real-time and filtering effect of common low-pass filter. This adopts inertial filter to improve the characteristics of Butterworth low-pass filter and enable them to better adapt to the needs of the voltage sag detection thus improving the real-time quality and precision of dynamic voltage restorer.


Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 674
Author(s):  
Guangjun Tan ◽  
Chunan Zong ◽  
Xiaofeng Sun

When three-phase voltages are polluted with unbalance, DC offsets, or higher harmonics, it is a challenge to quickly detect their parameters such as phases, frequency, and amplitudes. This paper proposes a phase-locked loop (PLL) for the three-phase non-ideal voltages based on the decoupling network composed of two submodules. One submodule is used to detect the parameters of the fundamental and direct-current voltages based on Tan-Sun transformation, and the other is used to detect the parameters of the higher-harmonic voltages based on Clarke transformation. By selecting the proper decoupling vector by mapping Hilbert space to Euclidean space, the decoupling control for each estimated parameter can be realized. The settling time of the control law can be set the same for each estimated parameter to further improve the response speed of the whole PLL system. The system order equals the number of the estimated parameters in each submodule except that a low-pass filter is required to estimate the average amplitude of the fundamental voltages, so the whole PLL structure is very simple. The simulation and experimental results are provided in the end to validate the effectiveness of the proposed PLL technique in terms of the steady and transient performance.


2017 ◽  
Vol E100.C (10) ◽  
pp. 858-865 ◽  
Author(s):  
Yohei MORISHITA ◽  
Koichi MIZUNO ◽  
Junji SATO ◽  
Koji TAKINAMI ◽  
Kazuaki TAKAHASHI

2016 ◽  
Vol 15 (12) ◽  
pp. 2579-2586
Author(s):  
Adina Racasan ◽  
Calin Munteanu ◽  
Vasile Topa ◽  
Claudia Pacurar ◽  
Claudia Hebedean

Author(s):  
Nanan Chomnak ◽  
Siradanai Srisamranrungrueang ◽  
Natapong Wongprommoon
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document