33.2 A 600V GaN Active Gate Driver with Dynamic Feedback Delay Compensation Technique Achieving 22.5% Turn-On Energy Saving

Author(s):  
Jing Zhu ◽  
Ding Yan ◽  
Siyuan Yu ◽  
Weifeng Sun ◽  
Gang Shi ◽  
...  
Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2449
Author(s):  
Hongyan Zhao ◽  
Jiangui Chen ◽  
Yan Li ◽  
Fei Lin

Compared with a silicon MOSFET device, the SiC MOSFET has many benefits, such as higher breakdown voltage, faster action speed and better thermal conductivity. These advantages enable the SiC MOSFET to operate at higher switching frequencies, while, as the switching frequency increases, the turn-on loss accounts for most of the loss. This characteristic severely limits the applications of the SiC MOSFET at higher switching frequencies. Accordingly, an SRD-type drive circuit for a SiC MOSFET is proposed in this paper. The proposed SRD-type drive circuit can suppress the turn-on oscillation of a non-Kelvin packaged SiC MOSFET to ensure that the SiC MOSFET can work at a faster turn-on speed with a lower turn-on loss. In this paper, the basic principle of the proposed SRD-type drive circuit is analyzed, and a double pulse platform is established. For the purpose of proof-testing the performance of the presented SRD-type drive circuit, comparisons and experimental verifications between the traditional gate driver and the proposed SRD-type drive circuit were conducted. Our experimental results finally demonstrate the feasibility and effectiveness of the proposed SRD-type drive circuit.


2021 ◽  
Vol 11 (5) ◽  
pp. 2210
Author(s):  
Bartosz Lasek ◽  
Przemysław Trochimiuk ◽  
Rafał Kopacz ◽  
Jacek Rąbkowski

This article discusses an active gate driver for a 1.7 kV/325 A SiC MOSFET module. The main purpose of the driver is to adjust the gate voltage in specified moments to speed up the turn-on cycle and reduce the amount of dissipated energy. Moreover, an adequate manipulation of the gate voltage is necessary as the gate current should be reduced during the rise of the drain current to avoid overshoots and oscillations. The gate voltage is switched at the right moments on the basis of the feedback signal provided from a measurement of the voltage across the parasitic source inductance of the module. This approach simplifies the circuit and provides no additional power losses in the measuring circuit. The paper contains the theoretical background and detailed description of the active gate driver design. The model of the parasitic-based active gate driver was verified using the double-pulse procedure both in Saber simulations and laboratory experiments. The active gate driver decreases the turn-on energy of a 1.7 kV/325 A SiC MOSFET by 7% comparing to a conventional gate driver (VDS = 900 V, ID = 270 A, RG = 20 Ω). Furthermore, the proposed active gate driver lowered the turn-on cycle time from 478 to 390 ns without any serious oscillations in the main circuit.


2013 ◽  
Vol 76 (1) ◽  
pp. 35-46
Author(s):  
Chen-Yan Cai ◽  
Yang Jiang ◽  
Sai-Weng Sin ◽  
Seng-Pan U ◽  
Rui P. Martins

2020 ◽  
Vol 35 (10) ◽  
pp. 11193-11204 ◽  
Author(s):  
Yaofei Han ◽  
Chao Gong ◽  
Liming Yan ◽  
Huiqing Wen ◽  
Yangang Wang ◽  
...  

2019 ◽  
Author(s):  
Boris Curuvua ◽  
Lihua Chen ◽  
Fan Xu
Keyword(s):  
Turn On ◽  

Author(s):  
Dipen Narendra Dalal ◽  
Nicklas Christensen ◽  
Asger Bjorn Jorgensen ◽  
Simon Dyhr Sonderskov ◽  
Szymon Beczkowski ◽  
...  
Keyword(s):  
Turn On ◽  

Sign in / Sign up

Export Citation Format

Share Document