Smoothing gate capacitance models for CMOS radio frequency and microwave integrated circuits CAD

2003 ◽  
Author(s):  
J. Dobes
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency ◽  
Microwave Integrated Circuits ◽  
Gate Capacitance

Using the secondary electrons (SE) of SEM with NIST‘s MONSEL-II program to obtain improved linewidth measurements and slope angles of line edges on a MMIC GaAs device

1996 ◽  
Vol 54 ◽  
pp. 944-945
Author(s):  
Richard G. Sartore
Keyword(s):  
Integrated Circuits ◽  
Plasma Etching ◽  
Microwave Integrated Circuits ◽  
Monolithic Microwave Integrated Circuits ◽  
Thick Gold ◽  
Gaas Devices ◽  
Source Distance ◽  
Margin Of Error ◽  
Dimensional Measurements ◽  
Barrier Metal

In the evaluation of GaAs devices from the MMIC (Monolithic Microwave Integrated Circuits) program for Army applications, there was a requirement to obtain accurate linewidth measurements on the nominal 0.5 micrometer gate lengths used to fabricate these devices. Preliminary measurements indicated a significant variation (typically 10 % to 30% but could be more) in the critical dimensional measurements of the gate length, gate to source distance and gate to drain distance. Passivation introduced a margin of error, which was removed by plasma etching. Additionally, the high aspect ratio (4-5) of the thick gold (Au) conductors also introduced measurement difficulties. The final measurements were performed after the thick gold conductor was removed and only the barrier metal remained, which was approximately 250 nanometer thick platinum on GaAs substrate. The thickness was measured using the penetration voltage method. Linescan of the secondary electron signal as it scans across the gate is shown in Figure 1.

Combine Micro-Probing and OBIRCH to Catch Non-Recognizable Fault in RF and Mixed-Mode Integrated Circuits

2007 ◽  
Author(s):  
Cha-Ming Shen ◽  
Yen-Long Chang ◽  
Lian-Fon Wen ◽  
Tan-Chen Chuang ◽  
Shi-Chen Lin ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency ◽  
Failure Analysis ◽  
Case Studies ◽  
Mixed Mode ◽  
Failure Mechanisms ◽  
Deep Submicron ◽  
Digital Logic ◽  
Successful Approach ◽  
Cmos Processes

Abstract Highly-integrated radio frequency and mixed-mode devices that are manufactured in deep-submicron or more advanced CMOS processes are becoming more complex to analyze. The increased complexity presents us with many eccentric failure mechanisms that are uniquely different from traditional failure mechanisms found during failure analysis on digital logic applications. This paper presents a novel methodology to overcome the difficulties and discusses two case studies which demonstrate the application of the methodology. Through the case studies, the methodology was proven to be a successful approach. It is also proved how this methodology would work for such non-recognizable failures.

Sign in / Sign up

Export Citation Format

Share Document