Analysis of delay time in subthreshold CMOS circuits operating at ultra-low supply voltage

2014 ◽  
Author(s):  
Seung-Min Jung ◽  
Takuya Saraya ◽  
Toshiro Hiramoto
Keyword(s):  
Delay Time ◽  
Supply Voltage ◽  
Cmos Circuits ◽  
Subthreshold Cmos ◽  
Low Supply Voltage

A new erasing and row decoding scheme for low supply voltage operation 16-Mb/64-Mb flash memories

1992 ◽  
Vol 27 (4) ◽  
pp. 583-588 ◽  
Author(s):  
Y. Miyawaki ◽  
T. Nakayama ◽  
S. Kobayashi ◽  
N. Ajika ◽  
M. Ohi ◽  
...  
Keyword(s):  
Supply Voltage ◽  
Flash Memories ◽  
Low Supply Voltage

A 12-BIT 400-MS/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

2014 ◽  
Vol 23 (01) ◽  
pp. 1450004 ◽  
Author(s):  
XIAOBO XUE ◽  
XIAOLEI ZHU ◽  
QIFENG SHI ◽  
LENIAN HE
Keyword(s):  
Dynamic Range ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Signal Frequency ◽  
Current Steering ◽  
Digital To Analog Converter ◽  
Measurement Results ◽  
Voltage Swing ◽  
Current Steering Dac ◽  
Low Supply Voltage

In this paper, a 12-bit current-steering digital-to-analog converter (DAC) employing a deglitching technique is proposed. The deglitching technique is realized by lowering the voltage swing of the control signal as well as by using a method of glitch counteraction (GC). A new switch–driver structure is designed to enable the effectiveness of the GC and provide sufficient driving capability under a low supply voltage. Moreover, the control signal's rise/fall asymmetry which increases the glitch error can be suppressed by using the proposed switch–driver structure. The 12-bit DAC is implemented in 180 nm CMOS technology. The measurement results show that the spurious free dynamic range (SFDR) at low signal frequency is 78.8 dB, and it is higher than 70 dB up to 60 MHz signal frequency at 400 MS/s. The measured INL and DNL are both less than ±0.6 LSB.

scholarly journals DVCC-based Low-power RF Filter with 32 nm CNFETs

2021 ◽  
Author(s):  
Shailendra Tripathi ◽  
Amit Mahesh Joshi
Keyword(s):  
Low Power ◽  
Analog Circuits ◽  
Satellite Communication ◽  
Supply Voltage ◽  
Wide Band ◽  
Rf Receiver ◽  
Rf Filter ◽  
Low Supply Voltage ◽  
Differential Voltage Current Conveyor ◽  
Carbon Nanotube Fet

Abstract This work presents a wide-band active filter for RF receiver. The design uses Carbon Nanotube-FET (CNFET) based differential voltage current conveyor (DVCC) for the implementation of the proposed filter. The filter is designed to operate Ku-band frequencies (12-18 GHz), which is used in satellite communication. Additionally, CMOS based circuit and CNFET-based circuit for DVCC are compared for the performance evaluation. HSPICE simulations have been carried out to test the design aspects of the circuit. The CNFET-based circuit has better results in terms of 60 % reduction in the power consumption and about six times improvement in the bandwidth. The filter utilizes low supply voltage of 0.9 V and consumes 524 µW only. The proposed filter outperforms the existing CMOS-based designs which suggests its usage for low-power high-frequency analog circuits.

Sign in / Sign up

Export Citation Format

Share Document