FABRICATION AND CHARACTERIZATION OF POLYVINYLIDENE FLUORIDE COMPOSITE NANOFIBER MEMBRANE FOR WATER FLUX PROPERTY

2015 ◽  
Vol 74 (11) ◽  
Author(s):  
Azizul Mohd Zahari ◽  
Abdull Rahim Mohd Yusoff ◽  
Nor Aziah Buang ◽  
Palanivel Satishkumar ◽  
M Jasmin Fathi Jasni ◽  
...  
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Electrospun Nanofibers ◽  
External Diameter ◽  
Electrospinning Technique ◽  
Water Treatment Process ◽  
Pure Water Flux ◽  
Hydrophobic Nature

This research is about the investigation of the pure water flux property of composite polyvinylidene fluoride (PVDF) nanofibers. Electrospinning technique was used to prepare the composite electrospun nanofibers. PVDF was dissolved in N,N-dimethylformamide (DMF) solvent and blended together with activated carbon (AC) and polyvinylpyrrolidone (PVP). The nanofibers were characterized to determine the morphologies, wettability property, and its tensile strength. The fabricated nanofibers diameter was found in the range between 20 to 180 nm. The presence of AC deteriorates the mechanical properties of the nanofibers as the size of AC is larger than the external diameter of the nanofibers. The results of contact angle confirmed that the fabricated nanofiber exhibit less hydrophobic in the presence of PVP and AC. The less hydrophobic nature of proposed nanofiber might be useful for the water treatment process.

Preparation and Characterization of Hydrophilic PVDF Hollow Fiber Ultrafiltration Membrane

2011 ◽  
Vol 480-481 ◽  
pp. 201-206
Author(s):  
Li Guo Wang ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
Wen Juan Liu ◽  
Shi Qi Guo ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Hollow Fiber ◽  
Polyvinylidene Fluoride ◽  
Breaking Strength ◽  
Pure Water ◽  
Water Flux ◽  
Technical Parameters ◽  
Rupture Pressure ◽  
Pure Water Flux

Hydrophilic Polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of acrylic acid grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated via orthogonal test, the technical parameters of preparation of hydrophilic PVDF membranes were determined, and hydrophilic PVDF membranes were prepared. Then hydrophilic PVDF membranes were characterized in terms of breaking strength, breaking elongation, rupture pressure, pure water flux and rejection. The fouling properties and the conditions of acrylic acid grafted onto PVDF were also examined. The results showed that acrylic acid had been grafted onto PVDF, the breaking strength and rupture pressure improved greatly, and the fouling properties were better than PS hollow fiber UF membrane.

Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride

2011 ◽  
Vol 295-297 ◽  
pp. 286-291
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shu Fang Hou ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
...  
Keyword(s):  
Maleic Anhydride ◽  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Pvdf Membrane ◽  
Technical Parameters ◽  
Pure Water Flux ◽  
Flat Membranes ◽  
Better Than

Hydrophilic polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of maleic anhydride grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated, the preparation technical parameters were determined, and the hydrophilic PVDF flat membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of pure water flux, contact angle, infrared spectroscopic analysis and scanning electron microscope(SEM). The results showed that maleic anhydride had been grafted onto PVDF, and the hydrophilic performance of the modified membrane was better than the traditional one.

scholarly journals Preparation and Characterization of PVDF/g-C3N4/chitosan Nanocomposite Membrane for the Removal of Direct Blue 14 Dye

2021 ◽  
Author(s):  
Parya Hasanzade ◽  
Parvin Gharbani ◽  
Fahime Derakhshan ◽  
Behnaz Memar Maher
Keyword(s):  
Water Content ◽  
Membrane Fouling ◽  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Salt Rejection ◽  
Direct Blue ◽  
Pure Water Flux ◽  
Chitosan Membranes

Abstract Polyvinylidene fluoride (PVDF)/g-C3N4/Chitosan thin film membranes were prepared for removal of Direct Blue 14 dye (an anionic dye) from aqueous solutions. PVDF/g-C3N4/Chitosan membranes were prepared by immersing of PVDF/g-C3N4 membrane in solution containing various concentrations of chitosan. The resulting membranes were characterized by XRD, FESEM, TEM and AFM. Also, pure water flux, salt rejection, water content, antifouling properties of prepared membranes were investigated. The resulting demonstrate that pure water flux was decreased by increasing of chitosan concentration, while water content, antifouling properties and salt rejection were increased. It is found that chitosan has major impact on the membrane structural properties due to transform of the PVDF membrane into hydrophilic ones. It is reported that maximum 93% rejection of Direct Blue 14 was obtained by PVDF/g-C3N4/Chitosan membrane. Compared to the PVDF/g-C3N4 membrane, the experimental results showed that PVDF/g-C3N4/Chitosan membranes demonstrated high potential mainly due to greater hydrophilicity and further minimizing membrane fouling.

Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Acrylic Acid

2011 ◽  
Vol 306-307 ◽  
pp. 1563-1568 ◽  
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shu Fang Hou ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Pvdf Membrane ◽  
Technical Parameters ◽  
Pure Water Flux ◽  
Flat Membranes ◽  
Better Than

Hydrophilic polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of acrylic acid grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated, the technical parameters of preparation of hydrophilic PVDF membranes were determined, and hydrophilic PVDF flat membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of pure water flux, contact angle, infrared spectroscopic analysis and scanning electron microscope (SEM). The results showed that acrylic acid had been grafted onto PVDF, and the hydrophilic performance of the modified membrane was better than the traditional one.

Preparation and Characterization of Hydrophilic Ultrafiltration Membrane with PVDF and PAA Blends

2011 ◽  
Vol 480-481 ◽  
pp. 691-696 ◽  
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shi Qi Guo ◽  
Ai Min Wang ◽  
Xiu Ju Wang ◽  
...  
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Polymer Concentration ◽  
Water Flux ◽  
Ultrafiltration Membrane ◽  
Ultrafiltration Membranes ◽  
Pvdf Membrane ◽  
Technical Parameters ◽  
Pure Water Flux

Hydrophilic Polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The influence of blending ratio ( the mass ratio of PVDF and PAA), polymer concentration on preparation of blending modified hydrophilic PVDF ultrafiltration membranes were investigated, the technical parameters of preparation of hydrophilic PVDF membranes were determined, and hydrophilic PVDF membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of IR spectra, contact angle, scanning electron microscopy images, pure water flux and rejection. The results showed that hydrophilic ultrafiltration membrane could be prepared with PAA and PVDF blends, the hydrophilicity improved greatly, and it was better than traditional PVDF membrane.

scholarly journals Synthesis, characterization and filtration performance of the polyvinylidene fluoride membrane modified by poly(methyl ethacrylate-co-2-acrylamido-2-methylpropane sulfonic acid)

2018 ◽  
Vol 19 (4) ◽  
pp. 1279-1285
Author(s):  
Q. Y. Zhang ◽  
Q. An ◽  
Y. G. Guo ◽  
J. Zhang ◽  
K. Y. Zhao
Keyword(s):  
Sulfonic Acid ◽  
Polyvinylidene Fluoride ◽  
Phase Inversion ◽  
Pure Water ◽  
Water Flux ◽  
Contact Angles ◽  
Fouling Resistance ◽  
Inversion Process ◽  
Pvdf Membrane ◽  
Pure Water Flux

Abstract To enhance the anti-fouling and separating properties of polyvinylidene fluoride (PVDF) membranes, an amphiphilic copolymer of methyl methacrylate and 2-acrylamido-2-methylpropane sulfonic acid, poly(MMA-co-AMPS), was designed and synthesized. Through a phase-inversion process, the poly(MMA-co-AMPS) were fully dispersed in the PVDF membrane. The properties of membrane including the surface and cross-section morphology, surface wettability and fouling resistance under different pH solutions were investigated. Compared to the unmodified PVDF membranes, the contact angles of modified PVDF membranes decreased from 80.6° to 71.6°, and the pure water flux increased from 54 to 71 L·m−2·h−1. In addition, the hybrid PVDF membrane containing 0.5 wt% copolymers demonstrated an larger permeability, better fouling resistance and higher recovery ratio via pure water backlashing, when it was compared with the other blend membranes, and the virgin one in the cyclic test of anti-fouling. The modified membranes with the copolymers possessed an outstanding performance and may be used for further water treatment applications.

Excellent hydrophilicity of polyurethane modified polyvinylidene fluoride

2021 ◽  
pp. 1-8
Author(s):  
Jiale Qu ◽  
Shen Gao ◽  
Zhenghao Hou
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Membrane Properties ◽  
Pvdf Membrane ◽  
Sem Image ◽  
Low Surface Energy ◽  
Blending Method ◽  
Pure Water Flux ◽  
Pure Pvdf

Polyvinylidene fluoride (PVDF) is a promising membrane material in ultrafiltration (UF) applications; its extensive application however is limited due to the disadvantage in hydrophilicity and low surface energy. Herein, a sort of TPU-modified PVDF membrane is prepared by blending method and its hydrophilicity is compared with a series of pure/modified PVDF membranes. The contact angle and pure water flux (PWF) results demonstrate that the hydrophilicity of the TPU-modified PVDF membrane is enhanced, and the performance is not inferior to that of traditional pore-modified PVDF membranes. SEM image shows that the TPU-modified PVDF membrane maintains morphology of the pure PVDF membrane, indicating that TPU molecules have excellent compatibility with PVDF molecules and can maintain the mechanical property of PVDF membrane to a certain extent. Finally, we explore the effects of TPU molecules and PVDF molecules on water molecules, respectively, from a microscopic perspective involving first principles. This investigation not only establishes that PVDF membrane has been prepared with enhanced hydrophilicity, but also provides a novel avenue for the modification of membrane properties.

Hydrophilic modification of PVDF membranes by in situ synthesis of nano-Ag with nano-ZrO2

2021 ◽  
Vol 10 (1) ◽  
pp. 538-546
Author(s):  
Yanjun Lu ◽  
Yuxuan Ma ◽  
Tong Yang ◽  
Jifeng Guo
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Inversion Method ◽  
Hydrophilic Modification ◽  
E Coli ◽  
Pure Water Flux ◽  
Modified Membrane ◽  
Phase Inversion Method

Abstract Modified polyvinylidene fluoride (PVDF) membranes were prepared by the phase inversion method via blending in situ formed nanosilver (Ag) and nanozirconium dioxide (ZrO2). Scanning electron microscopy of the membranes revealed that the surface pore size of the membranes was increased and distributed widely with the addition of modified nanosilver (Ag) and nanozirconium dioxide (ZrO2). The pores of the membrane were reduced due to excessive modification of the material when the content of zirconium dioxide was increased to 0.4%. XRD characterization showed that in situ synthesis of nanosilver (Ag) and nanozirconium dioxide (ZrO2) had been successfully blended in the membranes. The contact angle of the modified membrane ranged from 82.72° to 67.37°, which showed that the hydrophilic properties of the membrane were improved. The pure water flux of the modified membrane increased from 28.43 to 143.2 L/m2 h, indicating that the hydrophilicity of the modified membrane was enhanced significantly. The flux recovery rate of the modified membrane was obviously increased in the fouling experiment with BSA as the source of organic pollutants. The antimicrobial contamination of the membrane was greatly enhanced with the E. coli microbial contamination experiment.

Preparation and Properties of Two-Dimensional Braid Heterogeneous-Reinforced Polyvinylidene Fluoride Hollow Fiber Membrane

2014 ◽  
Vol 936 ◽  
pp. 218-225 ◽  
Author(s):  
Quan Quan ◽  
Chang Fa Xiao ◽  
Hai Liang Liu ◽  
Wei Zhao ◽  
Xiao Yu Hu ◽  
...  
Keyword(s):  
Hollow Fiber ◽  
Polyvinylidene Fluoride ◽  
Polymer Solutions ◽  
Coating Layer ◽  
Pure Water ◽  
Water Flux ◽  
Two Dimensional ◽  
Hollow Fiber Membranes ◽  
Fiber Membranes ◽  
Pure Water Flux

The two-dimensional braid heterogeneous-reinforced (BHR) polyvinylidene fluoride (PVDF) hollow fiber membranes which include PVDF polymer solutions (coating layer) and the two-dimensional braid as a reinforcement were prepared through the dry-wet spinning process. The influence of PVDF concentration in polymer solutions on performance of BHR hollow fiber membranes were investigated by terms of pure water flux, protein rejection, a mechanical strength test, and morphology observations by a scanning electron microscope (SEM). The results of this study indicated that the tensile strength of the BHR PVDF hollow fiber membranes was nearly 75 MPa and the hollow fiber membranes were endowed with better flexibility performance. The BHR PVDF hollow fiber membranes had a favorable interfacial bonding between the coating layer and the two-dimensional braid. The pure water flux decreased, while the rejection ratio increased with the increase of polymer concentration.

Fouling Characterization of Polysulfone-Grafted-Methyl Methacrylate Membrane

2013 ◽  
Vol 465-466 ◽  
pp. 819-823 ◽  
Author(s):  
Muhamad Zaini Yunos ◽  
Zawati Harun ◽  
Hatijah Basri ◽  
Hariati Taib ◽  
Ahmad Fauzi Ismail
Keyword(s):  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Methyl Methacrylate ◽  
Bovine Serum ◽  
Pure Water ◽  
Water Flux ◽  
Optimum Time ◽  
Membrane Performance ◽  
Pure Water Flux

This study investigates the effects of different grafting time on the polysulfone grafted methyl methacrylate (PSf-g-MMA) membrane performance. PSf-g-MMA was successfully prepared via UV radiation method. Methyl methacrylate (MMA) and benzophenon (BP) were used as a monomer and initiator respectively. Membrane performances were measured based on permeation and rejection of bovine serum albumin (BSA). Degree of grafting was found to increase as grafting time increases and the optimum time was found at 100 minutes. The results revealed that the pure water flux and rejection were significantly improved with the addition of grafting time. The present of MMA also were found to improve fouling properties of the membrane.

Sign in / Sign up

Export Citation Format

Share Document