scholarly journals Mechanical and flammability properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and nanocomposites: Effects of compatibilizer and graphene

2018 ◽  
Vol 14 (4) ◽  
pp. 425-431 ◽  
Author(s):  
Nilesh Kumar Shrivastava ◽  
Ooi Shu Wooi ◽  
Azman Hassan ◽  
Ibrahim Mohammed Inuwa
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Flame Retardancy ◽  
Testing Machine ◽  
High Strength ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Morphological Studies ◽  
Impact Tester ◽  
Ul 94

Poly(lactic acid) (PLA)/polybutylene adipate co-terephthalate (PBAT) blends were prepared by melt blending and compatibilized by glycidyl methacrylate (GMA). The effect of graphene nanoplatelets (GNP) on these compatibilized blends were investigated by incorporating GNP at different content. The formulated blend and nanocomposites were characterized for mechanical, morphological, thermal and flammability properties by using universal testing machine, impact tester, field emission scanning electron microscope (FESEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), limiting oxygen index (LOI) and UL-94 respectively. The incorporation of 8 phr GMA into PLA/PBAT (75:25) blend as a compatibilizer results in a significant increase in impact strength (more than 14 times higher) compared to the uncompatibilized blend. Young's modulus and tensile strength of compatibilized PLA/PBAT nanocomposites increased upon addition of GNP and reached maximum values at 4 phr before decreasing slightly. However, impact strength decreased with increasing GNP contents. The thermal stability and the flame retardancy of the GNP reinforced blend nanocomposites were also improved with an increase in nanofiller content and the maximum values for the nanocomposites were achieved at 6 phr. Interestingly, the nanocomposites samples showed a UL-94 rating of V0 at 4 and 6 phr of GNP. Morphological studies using FESEM showed the GNP were evenly distributed and dispersed in the PLA/PBAT nanocomposites. The current methodology to prepare PLA/PBAT blend nanocomposite is an economical way to produce high strength biodegradable polymer which also has good flame retardancy.

scholarly journals Effect of a Novel Flame Retardant on the Mechanical, Thermal and Combustion Properties of Poly(Lactic Acid)

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2407
Author(s):  
Mingjun Niu ◽  
Zhongzhou Zhang ◽  
Zizhen Wei ◽  
Wanjie Wang
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Testing Machine ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Biobased Materials ◽  
Cone Calorimeter Test ◽  
Combustion Properties ◽  
Ul 94

Poly(lactic) acid (PLA) is one of the most promising biobased materials, but its inherent flammability limits its applications. A novel flame retardant hexa-(DOPO-hydroxymethylphenoxy-dihydroxybiphenyl)-cyclotriphosphazene (HABP-DOPO) for PLA was prepared by bonding 9,10-dihydro-9-oxy-10-phosphaphenanthrene-10-oxide (DOPO) to cyclotriphosphazene. The morphologies, mechanical properties, thermal stability and burning behaviors of PLA/HABP-DOPO blends were investigated using a scanning electron microscope (SEM), a universal mechanical testing machine, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), limiting oxygen index (LOI), vertical burning (UL-94) and a cone calorimeter test (CCT). The LOI value reached 28.5% and UL-94 could pass V-0 for the PLA blend containing 25 wt% HABP-DOPO. A significant improvement in fire retardant performance was observed for PLA/HABP-DOPO blends. PLA/HABP-DOPO blends exhibited balanced mechanical properties. The flame retardant mechanism of PLA/HABP-DOPO blends was evaluated.

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

Functionalization of Graphene and Its Influence on Mechanical Properties and Flame Retardancy of Jute/Poly(lactic acid) Composite

2019 ◽  
Vol 19 (11) ◽  
pp. 7074-7082 ◽  
Author(s):  
Tao Yu ◽  
Changqing Hu ◽  
Yan Li
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Oxygen Index ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Matrix Toughness ◽  
Modified Graphene

In this work, 9,10-dihydro-9-oxa-phosphaphenanthrene-10-oxide (DOPO) was covalently grafted onto the surface of graphene to get modified graphene (G-DOPO) firstly. The mechanical properties and flame retardancy of jute/poly(lactic acid) (PLA) composite with G-DOPO were studied. According to Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), it was confirmed that DOPO was grafted on the surface of graphene successfully. Thermogravimetric analysis (TGA) results demonstrated that the residue char of the composites increased with the addition of G-DOPO. The total heat release (THR) of the composite was significantly reduced and the limiting oxygen index (LOI) increased after adding G-DOPO into the composite. Moreover, the mechanical properties results showed that the comprehensive effects of G-DOPO on the interface enhancement and matrix toughness were found.

Flammability and thermal properties of modified carbon nanotubes in poly(lactic acid)

2018 ◽  
Vol 32 (8) ◽  
pp. 1107-1122 ◽  
Author(s):  
Chao Guo ◽  
Fei Xin ◽  
Congcong Zhai ◽  
Yu Chen
Keyword(s):  
Carbon Nanotubes ◽  
Lactic Acid ◽  
Flame Retardancy ◽  
Mass Loss Rate ◽  
Covalent Bond ◽  
Poly Lactic Acid ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Multi Walled Carbon Nanotubes ◽  
Modified Carbon Nanotubes

The multi-walled carbon nanotubes (CNTs) were modified using phosphaphenanthrene compounds (9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO)) and vinyl triethoxy silane (VTES) by covalent bond. The DOPO- and VTES-treated CNTs were named DVCNT, and the structure was characterized by Fourier transform infrared, thermogravimetric analysis, and transmission electron microscopy. Nanocomposites were prepared by adding CNTs or DVCNT to poly(lactic acid) (PLA), and the flame retardancy was examined by determination of limiting oxygen index (LOI), vertical burning (UL94), and cone calorimetry. Results reveal that the LOI of PLA/DVCNT_4% composites was increased to 26.6 and prevents dripping of PLA in some level, and DVCNT can significantly reduce heat release rate and mass loss rate during combustion, which indicate that DVCNT can improve the dispersibility of the CNTs in the polymer composites and hence enhance the flame retardancy simultaneously.

scholarly journals Flame Retardancy and Toughness of Poly(Lactic Acid)/GNR/SiAHP Composites

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1129 ◽  
Author(s):  
Ningjing Wu ◽  
Jihang Yu ◽  
Wenchao Lang ◽  
Xiaobing Ma ◽  
Yue Yang
Keyword(s):  
Lactic Acid ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
High Performance ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Cone Calorimeter Test ◽  
Interfacial Compatibility ◽  
Aluminum Hypophosphite

A novel flame-retardant and toughened bio-based poly(lactic acid) (PLA)/glycidyl methacrylate-grafted natural rubber (GNR) composite was fabricated by sequentially dynamical vulcanizing and reactive melt-blending. The surface modification of aluminum hypophosphite (AHP) enhanced the interfacial compatibility between the modified aluminum hypophosphite by silane (SiAHP) and PLA/GNR matrix and the charring ability of the PLA/GNR/SiAHP composites to a certain extent, and the toughness and flame retardancy of the PLA/GNR/SiAHP composites were slightly higher than those of PLA/GNR/AHP composites, respectively. The notched impact strength and elongation of the PLA composite with 20 wt. %GNR and 18 wt.% SiAHP were 13.1 kJ/m2 and 72%, approximately 385% and 17 fold higher than those of PLA, respectively, and its limiting oxygen index increased to 26.5% and a UL-94 V-0 rating was achieved. Notedly, the very serious melt-dripping characteristics of PLA during combustion was completely suppressed. The peak heat release rate and total heat release values of the PLA/GNR/SiAHP composites dramatically reduced, and the char yield obviously increased with an increasing SiAHP content in the cone calorimeter test. The good flame retardancy of the PLA/GNR/SiAHP composites was suggested to be the result of a synergistic effect involving gaseous and condensed phase flame-retardant mechanisms. The high-performance flame-retardant PLA/GNR/SiAHP composites have great potential application as replacements for petroleum-based polymers in the automotive interior and building fields.

Mechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) Blends

2014 ◽  
Vol 970 ◽  
pp. 312-316
Author(s):  
Sujaree Tachaphiboonsap ◽  
Kasama Jarukumjorn
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Interfacial Adhesion ◽  
Tensile Modulus ◽  
Thermoplastic Starch ◽  
Morphological Properties ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Elongation At Break ◽  
Blending Method

Thermoplastic starch (TPS)/poly (lactic acid) (PLA) blend and thermoplastic starch (TPS)/poly (lactic acid) (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blend were prepared by melt blending method. PLA grafted with maleic anhydride (PLA-g-MA) was used as a compatibilizer to improve the compatibility of the blends. As TPS was incorporated into PLA, elongation at break was increased while tensile strength, tensile modulus, and impact strength were decreased. Tensile properties and impact properties of TPS/PLA blend were improved with adding PLA-g-MA indicating the enhancement of interfacial adhesion between PLA and TPS. With increasing PBAT content, elongation at break and impact strength of TPS/PLA blends were improved. The addition of TPS decreased glass transition temperature (Tg), crystallization temperature (Tc), and melting temperature (Tm) of PLA. Tgand Tcof TPS/PLA blend were decreased by incorporating PLA-g-MA. However, the presence of PBAT reduced Tcof TPS/PLA blend. Thermal properties of TPS/PLA/PBAT blends did not change with increasing PBAT content. SEM micrographs revealed that the compatibilized TPS/PLA blends exhibited finer morphology when compared to the uncompatibilized TPS/PLA blend.

Sign in / Sign up

Export Citation Format

Share Document