scholarly journals Geothermal Energy in Colombia as of 2018

2020 ◽  
Vol 24 (1) ◽  
Author(s):  
David Alejandro Moreno-Rendón ◽  
Jacqueline López-Sánchez ◽  
Daniela Blessent

Colombia is a country with great potential for the exploitation of geothermal energy due to its high volcanic activity caused by the subduction between the Nazca and South American tectonic plates. However, this energy is yet to be exploited. This article seeks to describe, by means of a literature review and information processing, the current status of geothermal energy in Colombia, including the current regulations, the limitations, the recommendations to develop the geothermal energy, and some of the most important projects, studies, and research papers that have been emerged on the discovery, exploration, and exploitation of geothermal energy within the country, emphasizing the areas where exploration projects have been initiated, such as the Nevado del Ruiz volcano, the Tufiño–Chiles–Cerro Negro volcanic system, the Azufral volcano geothermal area, and the Paipa geothermal area. Over the years, energy vulnerability in Colombia and a government policy of fostering sustainable development in different territories have generated favorable conditions for the exploitation of geothermal resources. Nevertheless, there are several technical, infrastructural, legal, and institutional barriers that slow the proper development of these projects.

2021 ◽  
Vol 11 (6) ◽  
pp. 2691
Author(s):  
Nataša Ćuković Ignjatović ◽  
Ana Vranješ ◽  
Dušan Ignjatović ◽  
Dejan Milenić ◽  
Olivera Krunić

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.


2017 ◽  
Vol 114 ◽  
pp. 7107-7117 ◽  
Author(s):  
Nagasree Garapati ◽  
Benjamin M. Adams ◽  
Jeffrey M. Bielicki ◽  
Philipp Schaedle ◽  
Jimmy B. Randolph ◽  
...  

Author(s):  
Alain Ulazia ◽  
Aitor Urresti ◽  
Alvaro Campos ◽  
Gabriel Ibarra-Berastegi ◽  
Mirari Antxustegi ◽  
...  

The students of the Faculties of Engineering of the Universitty of Basque Country (Gipuzkoa-Eibar and Bilbao) in the last years of their studies, before becoming engineers, have the opportunity to select a block of subjects intended to enhance their knowledge on renewable energy systems. One of these subjects is Solar Thermal and Geothermal energy. These subjects are devoted to assessing the renewable energy resource, and designing optimal systems. Apart from the transmission of good practices, the focus is practical and is based on hands-on computer real-life exercises, which involves not only intensive programming using high-level software, but also the spatial representation of results. To that purpose two main open source codes are used: Octave (https://www.gnu.org/software/octave/), and QGIS (https://www.qgis.org/). Students learn how to address real-life problems regarding the geographical representation of solar radiation and low temperature geothermal resources using QGIS, and solar thermal system modelling using Octave.


Energy ◽  
2015 ◽  
Vol 93 ◽  
pp. 466-483 ◽  
Author(s):  
Jialing Zhu ◽  
Kaiyong Hu ◽  
Xinli Lu ◽  
Xiaoxue Huang ◽  
Ketao Liu ◽  
...  

2021 ◽  
Author(s):  
Brian O’Reilly ◽  
Duygu Kiyan ◽  
Javier Fullea ◽  
Sergei Lebedev ◽  
Christopher J. Bean ◽  
...  

<p>Potential deep (greater > 400 m) geothermal resources, within low to medium temperature settings remain poorly understood and largely untapped in Europe. DIG (De-risking Ireland’s Geothermal Potential) is a new academic project started in 2020, which aims to develop a better understanding of Ireland’s (all-island) low-enthalpy geothermal energy potential through the gathering, modelling and interpretation of geophysical, geological, and geochemical data.</p><p>The overarching research objectives, are to (i) determine the regional geothermal gradient with uncertainty estimates across Ireland using new and existing geophysical and geochemical-petrophysical data, (ii) investigate the thermochemical crustal structure and secondary fracture porosity in Devonian/Carboniferous siliciclastic and carbonate lithologies using wide-angle seismic, gravity and available geochemical data, and (iii) identify and assess the available low-enthalpy geothermal resources at reservoir scale within the Upper Devonian Munster Basin, i.e. the Mallow warm springs region, using electromagnetic and passive seismic methods, constrained by structural geological mapping results. A new hydrochemistry programme to characterise deep reservoir water composition will add further constraints.</p><p>In the island-scale strand of the project, we are using Rayleigh and Love surface waves in order to determine the seismic-velocity and thermal structure of the lithosphere, with crustal geometry. Together with the legacy surface heat flow, gravity, and newly available long-period MT data, this will place bounds on the shape of regional geotherms. Radiogenic heat production and thermal conductivity measurements for Irish rocks will be incorporated into an integrated geophysical-petrological model, within a scheme able to provide critical temperature uncertainties. Regional-scale research will exploit legacy wide-angle seismic data across the Laurentian and Avalonian geological terranes. Geochemical and petrophysical databases will guide in-house Bayesian inversion tools, to estimate probabilities on model outcomes.</p><p>Local-scale research will derive subsurface electrical conductivity and velocity images from electromagnetic and passive seismic surveys from the northern margin of the Munster Basin, where the thermal waters tend to have a distinctive chemical fingerprint and a meteoric origin based on available geochemical and isotopic compositions. This local focus aims to directly image fault conduits and fluid aquifer sources at depth, within a convective/conductive region associated with warm springs. This will determine the scale of the geothermal anomaly and hence will evaluate the potential for local- and industrial-scale space heating in the survey locality.</p><p>This presentation will give an overview of this new research project and will deliver preliminary multi-parameter crustal models produced by the thermodynamic inversions that fit the surface-wave and surface elevation data. The project is funded by the Sustainable Energy Authority of Ireland under the SEAI Research, Development & Demonstration Funding Programme 2019 (grant number 19/RDD/522) and by the Geological Survey Ireland.</p>


2018 ◽  
Vol 24 ◽  
pp. 25-29
Author(s):  
Páll Einarsson ◽  
Haukur Jóhannesson ◽  
Ásta Rut Hjartardóttir

Straddling the boundary between two of the major tectonic plates on Earth, Iceland offers unique conditions for engineering structures that require special attention. Urban areas are rapidly expanding into areas where the bedrock is cut by numerous active fractures and faults. The fissure swarm of the Krísuvík volcanic system runs through the outskirts of Reykjavík and other towns of the metropolitan area. Activity of its fractures mostly occurs during magmatic events along the Reykjanes Peninsula oblique rift on a thousand years timescale. Hazard caused by the fractures is mostly twofold: Relative displacement of the walls of the fracture during magmatic intrusion and small relative displacements during the passage of seismic waves from distant earthquakes may damage structures built across them. The risk of structural damage may most likely be reduced considerably by avoiding building structures across the fractures. We suggest a change in building practice in fractures areas to achieve that.


Cryobiology ◽  
2021 ◽  
Vol 103 ◽  
pp. 188
Author(s):  
Danilo Streit ◽  
Rômulo Rodrigues ◽  
Ana Carina Vasconcelos ◽  
Eduardo Sanches ◽  
Jayme Povh ◽  
...  

2020 ◽  
Vol 10 (8) ◽  
pp. 2689 ◽  
Author(s):  
Guopeng Yu ◽  
Zhibin Yu

In response to the twin development challenges of energy shortage and water-scarcity in worldwide arid to semi-arid regions with geothermal resources, a new combined power and freshwater generation system is proposed for geothermal energy utilization. In this system, a total-flow turbine (TF) is employed to be coupled with the traditional single-flash (SF) system and thereafter the coupled TF-SF system is investigated in this work. In addition to power generation, the exhaust steam from turbines are recovered to produce freshwater through condensation. Based on the novel designed system, the production of both power and water are studied under variable wellhead conditions, including variable wellhead pressures, temperatures, mass flowrates, and vapor qualities. The temperature of the separating point at which the total-flow expansion ends and the steam expansion starts is studied for optimal system output. In addition, the efficiency effects of the total-flow turbine on performance of the combined system is also investigated. The power generation comparison shows good power potential of the proposed TF-SF combined system. An effective total-flow turbine with an average efficiency of 65% can lead to an optimal power capacity, exceeding the traditional single-flash (SF) system by 23.7%. Moreover, more than 1/3 of total wellhead discharge can be recovered as desalinated freshwater by the naturally equipped condensation process of the power plant, showing extra benefit from geothermal energy utilization.


Sign in / Sign up

Export Citation Format

Share Document