Fluid Inertia Effects in a Non-Newtonian Squeeze Film Between Two Plane Annuli

1999 ◽  
Vol 122 (4) ◽  
pp. 872-875 ◽  
Author(s):  
R. Usha and ◽  
P. Vimala
Keyword(s):  
Carrying Capacity ◽  
Integral Method ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Fluid Inertia ◽  
Inertia Effects ◽  
Load Carrying ◽  
Analytical Expressions ◽  
Plastic Fluids

An analysis is presented for the laminar squeeze flow of an incompressible powerlaw fluid between parallel plane annuli using the modified lubrication theory and energy integral method. The local and the convective inertia of the flow are considered in the investigation. Analytical expressions for the load carrying capacity of the squeeze film are obtained using both the methods and are compared with those based on the assumption of inertialess flow. It is observed that the inertia correction in the load carrying capacity is more significant for pseudo-plastic fluids, n<1.[S0742-4787(00)00504-X]

Theoretical Investigation of Couple Stress Squeeze Films in a Curved Circular Geometry

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Vimala Manivasakan ◽  
Govindarajan Sumathi
Keyword(s):  
Theoretical Investigation ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Fluid Inertia ◽  
Load Carrying ◽  
Inertia Forces ◽  
Good Agreement

A theoretical investigation of the laminar squeeze flow of a couple-stress fluid between a flat circular static disk and an axisymmetric curved circular moving disk has been carried out using modified lubrication theory and microcontinuum theory. The combined effects of fluid inertia forces, curvature of the disk and non-Newtonian couple stresses on the squeeze film behavior are investigated analytically. Each of these effects and their combinations show a significant enhancement in the squeeze film behavior, and these are studied through their effects on the squeeze film pressure and the load carrying capacity of the fluid film as a function of time. Two different forms of the gapwidth between the disks have been considered, and the results have been shown to be in good agreement with the existing literature.

Theoretical Investigation of Unsteady Squeeze Flow in a Curved Newtonian Squeeze Film

2002 ◽  
Vol 124 (4) ◽  
pp. 865-869 ◽  
Author(s):  
R. Usha and ◽  
P. Vimala
Keyword(s):  
Arbitrary Shape ◽  
Normal Force ◽  
Viscous Incompressible Fluid ◽  
Circular Disk ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Inertia Effects ◽  
Curvature Effects ◽  
Load Carrying

The laminar squeeze flow of a viscous incompressible fluid between a flat circular disk and an axisymmetric curved disk of arbitrary shape is investigated theoretically using modified lubrication theory. The characteristics of squeeze film are investigated through inertia and curvature effects on the normal force exerted on the upper curved moving disk described by an exponential function for the sinusoidal squeeze motion. The constant force squeezing state is also examined. It has been observed that the load carrying capacity of the curved squeeze film is strongly influenced by the curvature and inertia effects.

Effect of concentration dependence of viscosity on squeeze film lubrication

2020 ◽  
Vol 75 (6) ◽  
pp. 533-542
Author(s):  
Poosan Muthu ◽  
Vanacharla Pujitha
Keyword(s):  
Carrying Capacity ◽  
Iterative Procedure ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Convection Diffusion ◽  
Load Carrying ◽  
Newtonian Viscous Fluid ◽  
Nicolson Scheme ◽  
Human Joint ◽  
Film Lubrication

AbstractThe influence of concentration of solute particles on squeeze film lubrication between two poroelastic surfaces has been analyzed using a mathematical model. Newtonian viscous fluid is considered as a lubricant whose viscosity varies linearly with concentration of suspended solute particles. Convection-diffusion model is proposed to study the concentration of solute particles and is solved using finite difference method of Crank–Nicolson scheme. An iterative procedure is used to get the solution for concentration, pressure and velocity components in film region. It has been observed that load carrying capacity decreases as the concentration of solute particles in the fluid film decreases. Further, the concentration of suspended solute particles decreases as the permeability of the poroelastic plate increases and these results may be useful in understanding the mechanism of human joint.

Stochastic Reynolds equation for the combined effects of piezo-viscous dependency and squeeze-film lubrication of micropolar fluids on rough porous circular stepped plates

2021 ◽  
pp. 135065012110224
Author(s):  
Hanumagowda Bannihalli Naganagowda ◽  
Sreekala Cherkkarathandayan Karappan
Keyword(s):  
Carrying Capacity ◽  
Stochastic Approach ◽  
Squeeze Film ◽  
Closed Form Expression ◽  
Load Carrying Capacity ◽  
Micropolar Fluids ◽  
Pressure Dependent Viscosity ◽  
Load Carrying ◽  
Dependent Viscosity ◽  
Film Characteristics

The aim of this paper is to presents a theoretical analysis on squeeze-film characteristics of a rough porous circular stepped plate in the vicinity of pressure-dependent viscosity and lubrication by micropolar fluids. A closed-form expression for non-dimensional pressure, load, and squeezing time is derived based on Eringen’s theory, Darcy’s equation, and Christensen’s stochastic approach. Results indicate that the effects of pressure-dependent viscosity, surface roughness, and micropolar fluids play an important role in increasing the load-carrying capacity and squeezing time, whereas the presence of porous media decreases the load-carrying capacity and squeezing time of the rough porous circular stepped plates.

Numerical investigation of squeeze film lubrication on bioinspired hexagonal patterned surface

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Binbin Su ◽  
Xianghe Zou ◽  
Lirong Huang
Keyword(s):  
Flow Rate ◽  
Carrying Capacity ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Two Dimensional ◽  
Working Mechanism ◽  
Content Type ◽  
Patterned Surface ◽  
Load Carrying ◽  
Film Lubrication

Purpose This paper aims to investigate the squeeze film lubrication properties of hexagonal patterned surface inspired by the epidermis structure of tree frog’s toe pad and numerically explore the working mechanism of hexagonal micropillar during the acquisition process of high adhesive and friction for wet contacts. Design/methodology/approach A two-dimensional elastohydrodynamic numerical model is employed for the squeezing contacts. The pressure distribution, load carrying capacity and liquid flow rate of the squeeze film are obtained through a simultaneous solution of the two-dimensional Reynolds equation and elasticity deformation equations. Findings Higher pressure is found to be longitudinally distributed across individual hexagonal pillar, with pressure peak emerging at the center of hexagonal pillar. Expanding the area density and shrinking the channel depth or initial film thickness will improve the magnitude of squeezing pressure. Relatively lower pressure is generated inside interconnected channels, which reduces the load carrying capacity of the squeeze film. Meanwhile, the introduction of microchannel is revealed to downscale the total mass flow rate of squeezing contacts. Originality/value This paper provides a good proof for the working mechanism of surface microstructures during the acquisition process of high adhesive and friction for wet contacts.

Effect of Velocity Slip on Porous-Walled Squeeze Films

1972 ◽  
Vol 94 (3) ◽  
pp. 260-264 ◽  
Author(s):  
E. M. Sparrow ◽  
G. S. Beavers ◽  
I. T. Hwang
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Carrying Capacity ◽  
Response Times ◽  
Velocity Slip ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Flow Processes ◽  
Time Relation

The fluid flow processes in a squeeze film having one porous bounding wall are analyzed. The analysis takes account of velocity slip at the surface of the porous medium as well as of the coupled flows in the squeeze film and the porous material. Results are presented for the load-carrying capacity of the squeeze film and its thickness–time relation. The results show that porous media are effective in diminishing the response times of squeeze films. In particular, substantially faster response can be attained by the use of porous materials which accentuate velocity slip.

SEARCH FOR THE MOST USEFUL GEOMETRY OF AN ACOUSTIC JOURNAL BEARING

Tribologia ◽  
2018 ◽  
Vol 273 (3) ◽  
pp. 15-66 ◽  
Author(s):  
Rafał GAWARKIEWICZ
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Simulations ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Squeeze Film ◽  
Acoustic Levitation ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying

Computer simulations of a number of journal bearing’s geometries utilising acoustic levitation were carried out. The choice of the best geometry depended on the ability of a deformed shape, created by piezo-electric elements, to facilitate squeeze film ultrasonic levitation, and also to create three evenly distributed diverging aerodynamic gaps. Deformations of analysed variants of the bearing’s shape were generated by numerical simulations utilising the finite element method. For the chosen shapes of geometry, prototype bearings were made and their usefulness verified experimentally. As a result, the bearing with the highest load carrying capacity was identified.

Effect of surface roughness and elastic deformation on the performance of a magnetic fluid-based squeeze film in rotating porous annular plates

2014 ◽  
Vol 66 (3) ◽  
pp. 490-497
Author(s):  
Mukesh E. Shimpi ◽  
Gunamani Deheri
Keyword(s):  
Elastic Deformation ◽  
Magnetic Fluid ◽  
Carrying Capacity ◽  
Type Equation ◽  
Squeeze Film ◽  
Rotational Inertia ◽  
Load Carrying Capacity ◽  
Content Type ◽  
Annular Plates ◽  
Load Carrying

Purpose – The purpose of this paper is to study and analyse the behaviour of a magnetic fluid-based squeeze film between rotating transversely rough porous annular plates, taking the elastic deformation into consideration. Design/methodology/approach – The stochastic film thickness characterizing the roughness is considered to be asymmetric with non-zero mean and variance and skewness while a magnetic fluid is taken as the lubricant. The associated stochastically averaged Reynolds-type equation is solved with appropriate boundary conditions to obtain the pressure distribution, which in turn is used to derive the expression for the load-carrying capacity. Findings – It is observed that the roughness of the bearing surfaces affects the performance adversely, although the bearing registers an improved performance owing to the magnetic fluid lubricant. Also, it is seen that the deformation causes reduced load-carrying capacity. The bearing can support a load even in the absence of flow, unlike the case of conventional lubricants. Originality/value – The originality of the paper lies in the fact that the negative effect of porosity, deformation and standard deviation can be minimized to some extent by the positive effect of the magnetic fluid lubricant in the case of negatively skewed roughness by suitably choosing the rotational inertia and aspect ratio. This effect becomes sharper when negative variance occurs.

Effect of Mass Transfer on a Similar Flow in the Magnetohydrodynamic Squeeze Film

1997 ◽  
Vol 64 (1) ◽  
pp. 240-243 ◽  
Author(s):  
R. Usha ◽  
R. Sridharan
Keyword(s):  
Analytic Solutions ◽  
Nonlinear Ordinary Differential Equation ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Porous Disk ◽  
Normal Forces ◽  
Parallel Disks ◽  
Load Carrying ◽  
Suction Or Injection

An exact similarity solution has been obtained for the magneto-hydrodynamic squeeze flow between two parallel disks with suction or injection at the porous disk. The disks, at time t*, are spaced a distance H(1−αt*)1/2 apart and a magnetic field proportional to B0(1−αt*)−1/2 is applied perpendicular to the disks. Approximate analytic solutions are given and a numerical solution to the resulting nonlinear ordinary differential equation is obtained. The effects of magnetic forces on the velocity profiles and on the normal forces which the fluid exerts on the disks with suction or injection on the stationary porous disk are studied. It has been found that the effect of injection is to increase the load carrying capacity and it is the reverse in the case of suction.

Effect of viscosity variation on non-Newtonian lubrication of squeeze film conical bearing having porous wall operating with Rabinowitsch fluid model

2018 ◽  
Vol 233 (7) ◽  
pp. 2538-2551 ◽  
Author(s):  
Pentyala Srinivasa Rao ◽  
Amit Kumar Rahul
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Porous Wall ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Pressure Load ◽  
Load Carrying ◽  
Newtonian Case ◽  
Viscosity Variation

In this study, the effect of viscosity variation of non-Newtonian lubrication on squeeze film characteristics with porous and Rabinowitsch fluid for conical bearings is analyzed. The modified Reynolds equation representing the characteristics of non-Newtonian fluid with viscosity variation on the porous wall followed by the cubic stress law condition is invoked. For lubricant flow in a bearing clearance and in a porous layer Morgan–Cameron approximation is considered. A small perturbation technique is used to compute the pressure generation using modified Reynolds equation of lubrication. Approximate analytical solutions have been obtained for the squeeze film pressure, load-carrying capacity, squeeze film time, and center of pressure. The outcomes are displayed in diagrams and tables, which show that the effect of viscosity variation and porous wall on the squeeze film lubrication of conical bearings decreases film pressure, load-carrying capacity, and response time for the Newtonian case in comparison to the non-Newtonian case.

Sign in / Sign up

Export Citation Format

Share Document