Boundary Layer Development in the BR710 and BR715 LP Turbines—The Implementation of High-Lift and Ultra-High-Lift Concepts

2002 ◽  
Vol 124 (3) ◽  
pp. 385-392 ◽  
Author(s):  
R. J. Howell ◽  
H. P. Hodson ◽  
V. Schulte ◽  
R. D. Stieger ◽  
Heinz-Peter Schiffer ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Test Facility ◽  
Surface Boundary ◽  
Unsteady Boundary Layer ◽  
Suction Surface ◽  
High Lift ◽  
Surface Boundary Layer ◽  
Cold Flow ◽  
Layer Behavior ◽  
Lp Turbine

This paper describes a detailed study into the unsteady boundary layer behavior in two high-lift and one ultra-high-lift Rolls-Royce Deutschland LP turbines. The objectives of the paper are to show that high-lift and ultra-high-lift concepts have been successfully incorporated into the design of these new LP turbine profiles. Measurements from surface mounted hot film sensors were made in full size, cold flow test rigs at the altitude test facility at Stuttgart University. The LP turbine blade profiles are thought to be state of the art in terms of their lift and design philosophy. The two high-lift profiles represent slightly different styles of velocity distribution. The first high-lift profile comes from a two-stage LP turbine (the BR710 cold-flow, high-lift demonstrator rig). The second high-lift profile tested is from a three-stage machine (the BR715 LPT rig). The ultra-high-lift profile measurements come from a redesign of the BR715 LP turbine: this is designated the BR715UHL LP turbine. This ultra-high-lift profile represents a 12 percent reduction in blade numbers compared to the original BR715 turbine. The results from NGV2 on all of the turbines show “classical” unsteady boundary layer behavior. The measurements from NGV3 (of both the BR715 and BR715UHL turbines) are more complicated, but can still be broken down into classical regions of wake-induced transition, natural transition and calming. The wakes from both upstream rotors and NGVs interact in a complicated manner, affecting the suction surface boundary layer of NGV3. This has important implications for the prediction of the flows on blade rows in multistage environments.

Boundary Layer Development in the BR710 and BR715 LP Turbines: The Implementation of High Lift and Ultra High Lift Concepts

2001 ◽  
Author(s):  
R. J. Howell ◽  
H. P. Hodson ◽  
V. Schulte ◽  
Heinz-Peter Schiffer ◽  
F. Haselbach ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Test Facility ◽  
Surface Boundary ◽  
Unsteady Boundary Layer ◽  
Suction Surface ◽  
High Lift ◽  
Surface Boundary Layer ◽  
Cold Flow ◽  
Boundary Layer Development ◽  
Lp Turbine

This paper describes a detailed study into the unsteady boundary layer behaviour in two high lift and one ultra high lift Rolls-Royce Deutschland LP turbines. The objectives of the paper are to show that high lift and ultra high-lift concepts have been successfully incorporated into the design of these new LP turbine profiles. Measurements from surface mounted hot film sensors were made in full size, cold flow test rigs at the altitude test facility at Stuttgart University. The LP turbine blade profiles are thought to be state of the art in terms of their lift and design philosophy. The two high lift profiles represent slightly different styles of velocity distribution. The first high-lift profile comes from a two stage LP turbine (the BR710 cold-flow, high-lift demonstrator rig). The second high-lift profile tested is from a three-stage machine (the BR715 LPT rig). The ultra-high lift profile measurements come from a redesign of the BR715 LP turbine: this is designated the BR715UHL LP turbine. This ultra high-lift profile represents a 12% reduction in blade numbers compared to the original BR715 turbine. The results from NGV2 on all of the turbines show “classical” unsteady boundary layer behaviour. The measurements from NGV3 (of both the BR715 and BR715UHL turbines) are more complicated, but can still be broken down into classical regions of wake-induced transition, natural transition and calming. The wakes from both upstream rotors and NGVs interact in a complicated manner, affecting the suction surface boundary layer of NGV3. This has important implications for the prediction of the flows on blade rows in multistage environments.

Loss reduction on ultra high lift low-pressure turbine blades using selective roughness and wake unsteadiness

2007 ◽  
Vol 111 (1118) ◽  
pp. 257-266 ◽  
Author(s):  
R. J. Howell ◽  
K. M. Roman
Keyword(s):  
Boundary Layer ◽  
Steady Flow ◽  
Separation Bubble ◽  
Turbine Blades ◽  
Low Pressure ◽  
Surface Boundary ◽  
Suction Surface ◽  
High Lift ◽  
Profile Losses ◽  
Lp Turbine

This paper describes how it is possible to reduce the profile losses on ultra high lift low pressure (LP) turbine blade profiles with the application of selected surface roughness and wake unsteadiness. Over the past several years, an understanding of wake interactions with the suction surface boundary layer on LP turbines has allowed the design of blades with ever increasing levels of lift. Under steady flow conditions, ultra high lift profiles would have large (and possibly open) separation bubbles present on the suction side which result from the very high diffusion levels. The separation bubble losses produced by it are reduced when unsteady wake flows are present. However, LP turbine blades have now reached a level of loading and diffusion where profile losses can no longer be controlled by wake unsteadiness alone. The ultra high lift profiles investigated here were created by attaching a flap to the trailing edge of another blade in a linear cascade — the so called flap-test technique. The experimental set-up used in this investigation allows for the simulation of upstream wakes by using a moving bar system. Hotwire and hotfilm measurements were used to obtain information about the boundary-layer state on the suction surface of the blade as it evolved in time. Measurements were taken at a Reynolds numbers ranging between 100,000 and 210,000. Two types of ultra high lift profile were investigated; ultra high lift and extended ultra high lift, where the latter has 25% greater back surface diffusion as well as a 12% increase in lift compared to the former. Results revealed that distributed roughness reduced the size of the separation bubble with steady flow. When wakes were present, the distributed roughness amplified disturbances in the boundary layer allowing for more rapid wake induced transition to take place, which tended to eliminate the separation bubble under the wake. The extended ultra high lift profile generated only slightly higher losses than the original ultra high lift profile, but more importantly it generated 12% greater lift.

Physical Explanations of Tip Leakage Flow Field in an Axial Compressor Rotor

1998 ◽  
Author(s):  
Masahiro Inoue ◽  
Masato Furukawa ◽  
Kazuhisa Saiki ◽  
Kazutoyo Yamada
Keyword(s):  
Boundary Layer ◽  
Vortex Core ◽  
Leakage Flow ◽  
Surface Boundary ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Vortex Lines

Structure of a tip leakage flow field in an axial compressor rotor has been investigated by detailed numerical simulations and appropriate post-processing. Physical explanations of the structure are made in terms of vortex-core identification, normalized helicity, vortex-lines, limiting streamlines, etc. The onset of the discrete tip leakage vortex is located on the suction surface at some distance from the leading edge. The vortex core with high vorticity is generated from a shear layer between the leakage jet flow and the main flow. The streamlines in the leakage flow are coiling around the vortex core. All the vortex-lines in the tip leakage vortex core link to ones in the suction surface boundary layer. The other vortex-lines in the suction surface boundary layer link to the vortex-lines in the pressure surface boundary layer and in the casing wall boundary layer. There are two mechanisms to reduce intensity of the tip leakage vortex: one is reduction of discharged vorticity caused by the linkage of vortex-lines between the suction surface and casing wall boundary layers, and another is diffusion of vorticity from the tip leakage vortex. Relative motion of the endwall has a substantial influence on the structure of the leakage flow field. In the case of a compressor rotor, it intensifies streamwise vorticity of the leakage vortex but reduces leakage flow loss.

Predicting the Profile Loss of High-Lift Low Pressure Turbines

2011 ◽  
Vol 134 (2) ◽  
Author(s):  
John D. Coull ◽  
Howard P. Hodson
Keyword(s):  
Boundary Layer ◽  
Velocity Distribution ◽  
Low Pressure ◽  
Design Tool ◽  
Surface Boundary ◽  
Preliminary Design ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Blade Loading ◽  
Profile Loss

The overall efficiency of low pressure turbines is largely determined by the two-dimensional profile loss, which is dominated by the contribution of the suction surface boundary layer. This boundary layer typically features a laminar separation bubble and is subjected to an inherently unsteady disturbance environment. The complexity of the flow behavior makes it difficult to numerically predict the profile loss. To address this problem, an empirical method is proposed for predicting the boundary layer integral parameters at the suction surface trailing edge, allowing the profile loss to be estimated. Extensive measurements have been conducted on a flat plate simulation of the suction surface boundary layer. The disturbance environment of real machines was modeled using a moving bar wake generator and a turbulence grid. From this data set, empirically based methods have been formulated using physical principles for the prediction of the momentum thickness and shape factor at the suction surface trailing edge. The predictions of these methods may be used to estimate the profile loss of a given cascade, which achieves reasonable agreement with the available data. By parameterizing the shape of the suction surface velocity distribution, the method is recast as a preliminary design tool. Powerfully, this may be used to guide the selection of the key design parameters (such as the blade loading and velocity distribution shape) and enables a reasonable estimation of the unsteady profile loss to be made at a very early stage of design. To illustrate the capabilities of the preliminary design tool, different styles of velocity distribution are evaluated for fixed blade loading and flow angles. The predictions suggest that relatively “flat-top” designs will have the lowest profile loss but good performance can also be achieved with front-loaded “peaky” distributions. The latter designs are more likely to have acceptable incidence tolerance.

scholarly journals Direct numerical simulations of transition in a compressor cascade: the influence of free-stream turbulence

2010 ◽  
Vol 665 ◽  
pp. 57-98 ◽  
Author(s):  
TAMER A. ZAKI ◽  
JAN G. WISSINK ◽  
WOLFGANG RODI ◽  
PAUL A. DURBIN
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Free Stream ◽  
Transition To Turbulence ◽  
Surface Boundary ◽  
Bypass Transition ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Laminar Separation ◽  
Free Stream Turbulence

The flow through a compressor passage without and with incoming free-stream grid turbulence is simulated. At moderate Reynolds number, laminar-to-turbulence transition can take place on both sides of the aerofoil, but proceeds in distinctly different manners. The direct numerical simulations (DNS) of this flow reveal the mechanics of breakdown to turbulence on both surfaces of the blade. The pressure surface boundary layer undergoes laminar separation in the absence of free-stream disturbances. When exposed to free-stream forcing, the boundary layer remains attached due to transition to turbulence upstream of the laminar separation point. Three types of breakdowns are observed; they combine characteristics of natural and bypass transition. In particular, instability waves, which trace back to discrete modes of the base flow, can be observed, but their development is not independent of the Klebanoff distortions that are caused by free-stream turbulent forcing. At a higher turbulence intensity, the transition mechanism shifts to a purely bypass scenario. Unlike the pressure side, the suction surface boundary layer separates independent of the free-stream condition, be it laminar or a moderate free-stream turbulence of intensityTu~ 3%. Upstream of the separation, the amplification of the Klebanoff distortions is suppressed in the favourable pressure gradient (FPG) region. This suppression is in agreement with simulations of constant pressure gradient boundary layers. FPG is normally stabilizing with respect to bypass transition to turbulence, but is, thereby, unfavourable with respect to separation. Downstream of the FPG section, a strong adverse pressure gradient (APG) on the suction surface of the blade causes the laminar boundary layer to separate. The separation surface is modulated in the instantaneous fields of the Klebanoff distortion inside the shear layer, which consists of forward and backward jet-like perturbations. Separation is followed by breakdown to turbulence and reattachment. As the free-stream turbulence intensity is increased,Tu~ 6.5%, transitional turbulent patches are initiated, and interact with the downstream separated flow, causing local attachment. The calming effect, or delayed re-establishment of the boundary layer separation, is observed in the wake of the turbulent events.

Control of separations in a highly loaded diffusion cascade by tailored boundary layer suction

2013 ◽  
Vol 228 (8) ◽  
pp. 1363-1374 ◽  
Author(s):  
Zhiyuan Cao ◽  
Bo Liu ◽  
Ting Zhang
Keyword(s):  
Boundary Layer ◽  
Static Pressure ◽  
Three Dimensional ◽  
Flow Fields ◽  
Separated Flows ◽  
Surface Boundary ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Boundary Layer Suction ◽  
Highly Loaded

In order to explore the control mechanism of boundary layer suction on the separated flows of highly loaded diffusion cascades, a linear compressor cascade, which has separated flows on the whole span and three-dimensional separations over the suction surface/endwall corner, was investigated by tailored boundary layer suction. Three suction surface-slotted schemes and two combined suction surface/endwall-slotted schemes were designed. The original cascade and the cascade with part blade span suction were experimentally investigated on a high-subsonic cascade wind tunnel. In addition, numerical simulation was employed to study the flow fields of different suction schemes in detail. The results shows that while tailored boundary layer suction at part blade span can effectively remove the separations at the suction span, the flow fields of other spans deteriorated. The reasons are the ‘C’ shape or reverse ‘C’ shape spanwise distribution of static pressure after part blade span boundary layer suction. Suction surface boundary layer suction over the whole span can obviously eliminate the separation at the suction surface. However, because of the endwall boundary layer, suction surface boundary layer suction cannot effectively remove the corner three-dimensional separation. The separation over the whole span and the three-dimensional separation at the corner are completely eliminated by combined suction surface/endwall boundary layer suction. After combined boundary layer suction, the static pressure distribution over the blade span just like the shape of ‘C’ is good for the transport of the low-energy fluid near the endwall to the midspan.

Prediction of the Becalmed Region for LP Turbine Profile Design

1997 ◽  
Author(s):  
Volker Schulte ◽  
Howard P. Hodson
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Laminar Boundary Layer ◽  
Turbine Blades ◽  
Boundary Layer Separation ◽  
Suction Surface ◽  
High Lift ◽  
Lp Turbine ◽  
Profile Loss

Recent attention has focused on the so called ‘becalmed region’ that is observed inside the boundary layers of turbomachinery blading and is associated with the process of wake-induced transition. Significant reductions of profile loss have been shown for high lift LP turbine blades at low Reynolds-numbers due the effects of the becalmed region on the diffusing flow at the rear of the suction surface. In this paper the nature and the significance of the becalmed region are examined using experimental observations and computational studies. It is shown that the becalmed region may be modelled using the unsteady laminar boundary layer equations. Therefore, it is predictable independently of the transition or turbulence models employed. The effect of the becalmed region on the transition process is modelled using a spot-based intermittency transition model. An unsteady differential boundary layer code was used to numerically simulate a deterministic experiment involving an isolated turbulent spot. The predictability of the becalmed region means that the rate of entropy production can be calculated in that region. It is found to be of the order of that in a laminar boundary layer. It is for this reason and because the becalmed region may be encroached upon by pursuing turbulent flows that for attached boundary layers, wake-induced transition cannot significantly reduce the profile loss. However, the becalmed region is less prone to separation than a conventional laminar boundary layer. Therefore, the becalmed region may be exploited in order to prevent boundary layer separation and the increase in loss that this entails. It is shown that it should now be possible to design efficient high lift LP turbine blades.

High Lift and Aft Loaded Profiles for Low Pressure Turbines

2000 ◽  
Author(s):  
R. J. Howell ◽  
O. N. Ramesh ◽  
H. P. Hodson ◽  
N. W. Harvey ◽  
V. Schulte
Keyword(s):  
Boundary Layer ◽  
First Generation ◽  
Test Facility ◽  
High Lift ◽  
Initial Development ◽  
Pressure Distributions ◽  
Unsteady Inflow ◽  
Lp Turbine ◽  
Profile Loss ◽  
Very High

This paper shows how it is possible to reduce the number of blades in LP turbines by approximately 15% relative to the first generation of high lift blading employed in the very latest engines. This is achieved through an understanding of the behaviour of the boundary layers on high lift and ultra high lift profiles subjected to incoming wakes. Initial development of the new profiles was carried out by attaching a flap to the trailing edge of one blade in a linear cascade. The test facility allows for the simulation of upstream wakes by using a moving bar system. Hot wire measurements were made to obtain boundary layer losses and surface mounted hot films were used to observe the changes in boundary layer state. Measurements were taken at a Reynolds number between 100,000 and 210,000. The effect of increased lift above the datum profile was investigated first with steady and then with unsteady inflow (i.e. with wakes present). For the same profile, the losses generated with wakes present were below those generated by the profile with no wakes present. The boundary layer behaviour on these very high lift pressure distributions suggested that aft loading the profiles would further reduce the profile loss. Finally, two very highly loaded and aft loaded LP turbine profile were designed and then tested in cascade. The new profiles produced losses only slightly higher than those for the datum profile with unsteady inflow, but generated 15% greater lift.

scholarly journals Multi-Blade Row Navier-Stokes Simulations of Fan-Bypass Configurations

1991 ◽  
Author(s):  
W. N. Dawes
Keyword(s):  
Boundary Layer ◽  
Pressure Field ◽  
Navier Stokes ◽  
Surface Boundary ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
The Core ◽  
Blade Row ◽  
Clearance Flow ◽  
Bypass Ratio

This paper describes extensions to a multi-blade row 3D Navier-Stokes solver to enable fan-splitter-bypass geometries to be handled. The code is applied to two generic configurations. The core-bypass splitter can exert considerable upstream influence via its associated pressure field and in the example shown here severely disturbs the fan suction surface boundary layer. The behaviour of the bypass ogv is substantially modified both by the clearance flow of the upstream fan and also by thicker than expected boundary layers on the splitter upper surface caused by the splitter LE incidence associated with the particular bypass ratio selected for the example.

Prediction of the Becalmed Region for LP Turbine Profile Design

1998 ◽  
Vol 120 (4) ◽  
pp. 839-846 ◽  
Author(s):  
V. Schulte ◽  
H. P. Hodson
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Laminar Boundary Layer ◽  
Turbine Blades ◽  
Boundary Layer Separation ◽  
Suction Surface ◽  
High Lift ◽  
Lp Turbine ◽  
Profile Loss

Recent attention has focused on the so-called “becalmed region” that is observed inside the boundary layers of turbomachinery blading and is associated with the process of wake-induced transition. Significant reductions of profile loss have been shown for high lift LP turbine blades at low Reynolds numbers due the effects of the becalmed region on the diffusing flow at the rear of the suction surface. In this paper the nature and the significance of the becalmed region are examined using experimental observations and computational studies. It is shown that the becalmed region may be modeled using the unsteady laminar boundary layer equations. Therefore, it is predictable independent of the transition or turbulence models employed. The effect of the becalmed region on the transition process is modeled using a spot-based intermittency transition model. An unsteady differential boundary layer code was used to simulate a deterministic experiment involving an isolated turbulent spot numerically. The predictability of the becalmed region means that the rate of entropy production can be calculated in that region. It is found to be of the order of that in a laminar boundary layer. It is for this reason and because the becalmed region may be encroached upon by pursuing turbulent flows that for attached boundary layers, wake-induced transition cannot significantly reduce the profile loss. However, the becalmed region is less prone to separation than a conventional laminar boundary layer. Therefore, the becalmed region may be exploited in order to prevent boundary layer separation and the increase in loss that this entails. It is shown that it should now be possible to design efficient high lift LP turbine blades.

Sign in / Sign up

Export Citation Format

Share Document