Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow

2004 ◽  
Vol 126 (3) ◽  
pp. 542-546 ◽  
Author(s):  
Z.-C. Peng ◽  
M. M. Khonsari
Keyword(s):  
Carrying Capacity ◽  
Journal Bearing ◽  
Hydrodynamic Performance ◽  
Load Carrying Capacity ◽  
Bearing Surface ◽  
Hydrodynamic Analysis ◽  
Foil Bearings ◽  
Wide Range ◽  
Load Carrying ◽  
Good Agreement

A model is developed to predict the hydrodynamic performance of a foil journal bearing. The model accounts for both the compressibility of air and the compliance of the bearing surface. A series of predictions of the load-carrying capacity based on the numerical solution for pressure is presented that cover a wide range of operating speeds. The results show good agreement with existing experimental data.

Effect of partial grooving on the performance of hydrodynamic journal bearing

2017 ◽  
Vol 69 (4) ◽  
pp. 574-584 ◽  
Author(s):  
Anil B. Shinde ◽  
Prashant M. Pawar
Keyword(s):  
Carrying Capacity ◽  
Power Loss ◽  
Journal Bearing ◽  
Fluid Film ◽  
Frictional Torque ◽  
Load Carrying Capacity ◽  
Bearing Surface ◽  
Film Pressure ◽  
Content Type ◽  
Load Carrying

Purpose This study aims to improve the performance of hydrodynamic journal bearings through partial grooving on the bearing surface. Design/methodology/approach Bearing performance analysis is numerically carried out using the thin film flow physics of COMSOL Multiphysics 5.0 software. Initially, the static performance analysis is carried out for hydrodynamic journal bearing system with smooth surface, and the results of the same are validated with results from the literature. In the later part of the paper, the partial rectangular shape micro-textures are modeled on bearing surface. The effects of partial groove pattern on the bearing performance parameters, namely, fluid film pressure, load carrying capacity, frictional power loss and frictional torque, are studied in detail. Findings The numerical results show that the values of maximum fluid film pressure, load carrying capacity, frictional power loss and frictional torque are considerably improved due to deterministic micro-textures. Bearing surface with partial groove along 90°-180° region results in 81.9 per cent improvement in maximum fluid film pressure and 75.9 per cent improvement in load carrying capacity as compared with smooth surface of journal bearing, with no increase in frictional power loss and frictional torque. Maximum decrease in frictional power loss and frictional torque is observed for partially grooving along 90°-360° region. The simulations are supported by proof-of-concept experimentation. Originality/value This study is useful in the appropriate selection of groove parameters on bearing surface to the bearing performance characteristics.

scholarly journals Design of steering system of a buggy

2020 ◽  
Vol 327 ◽  
pp. 03004
Author(s):  
D. Santana Sanchez ◽  
A. Mostafa
Keyword(s):  
Carrying Capacity ◽  
Steering System ◽  
Nonlinear Finite Element ◽  
Load Carrying Capacity ◽  
Dynamic Effects ◽  
Flexural Behaviour ◽  
Steering Angle ◽  
Load Carrying ◽  
And Performance ◽  
Good Agreement

The present paper discusses the design analysis and limitations of the steering system of a buggy. Many geometrical and performance characteristics of the designed steering system were considered to address the kinematic constraints and load carrying capacity of the steering elements. Ackremann geometry approach was used to assess the limiting steering angle, while Lewis bending formula with the inclusion of dynamic effects was employed to characterise the flexural properties of the rack and pinion steering system. Analytical results were numerically verified using ABAQUS/Explicit nonlinear finite element (FE) package. Good agreement has been achieved between analytical and numerical results in predicting the flexural behaviour of the steering rack and pinion system.

The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces

2005 ◽  
Vol 128 (2) ◽  
pp. 345-350 ◽  
Author(s):  
Y. Feldman ◽  
Y. Kligerman ◽  
I. Etsion ◽  
S. Haber
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Stokes Equations ◽  
Surface Texturing ◽  
Laser Surface Texturing ◽  
Physical Parameters ◽  
Load Carrying Capacity ◽  
Wide Range ◽  
Load Carrying ◽  
Parallel Surfaces

Microdimples generated by laser surface texturing (LST) can be used to enhance performance in hydrostatic gas-lubricated tribological components with parallel surfaces. The pressure distribution and load carrying capacity for a single three-dimensional dimple, representing the LST, were obtained via two different methods of analysis: a numerical solution of the exact full Navier-Stokes equations, and an approximate solution of the much simpler Reynolds equation. Comparison between the two solution methods illustrates that, despite potential large differences in local pressures, the differences in load carrying capacity, for realistic geometrical and physical parameters, are small. Even at large clearances of 5% of the dimple diameter and pressure ratios of 2.5 the error in the load carrying capacity is only about 15%. Thus, for a wide range of practical clearances and pressures, the simpler, approximate Reynolds equation can safely be applied to yield reasonable predictions for the load carrying capacity of dimpled surfaces.

The Granular Lubricated Journal Bearing: Evidence of Lift Formation

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Venkata K. Jasti ◽  
Martin C. Marinack ◽  
Deepak Patil ◽  
C. Fred Higgs
Keyword(s):  
Carrying Capacity ◽  
Granular Flow ◽  
High Speed ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Flow Behavior ◽  
Extreme Environments ◽  
Granular Flows ◽  
Load Carrying Capacity ◽  
Load Carrying

This work demonstrates that granular flows (i.e., macroscale, noncohesive spheres) entrained into an eccentrically converging gap can indeed actually exhibit lubrication behavior as prior models postulated. The physics of hydrodynamic lubrication is quite well understood and liquid lubricants perform well for conventional applications. Unfortunately, in certain cases such as high-speed and high-temperature environments, liquid lubricants break down making it impossible to establish a stable liquid film. Therefore, it has been previously proposed that granular media in sliding convergent interfaces can generate load carrying capacity, and thus, granular flow lubrication. It is a possible alternative lubrication mechanism that researchers have been exploring for extreme environments, or wheel-regolith traction, or for elucidating the spreadability of additive manufacturing materials. While the load carrying capacity of granular flows has been previously demonstrated, this work attempts to more directly uncover the hydrodynamic-like granular flow behavior in an experimental journal bearing configuration. An enlarged granular lubricated journal bearing (GLJB) setup has been developed and demonstrated. The setup was made transparent in order to visualize and video capture the granular collision activity at high resolution. In addition, a computational image processing program has been developed to process the resulting images and to noninvasively track the “lift” generated by granular flow during the journal bearing operation. The results of the lift caused by granular flow as a function of journal rotation rate are presented as well.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime

2016 ◽  
Vol 231 (3) ◽  
pp. 385-398 ◽  
Author(s):  
Ravindra Mallya ◽  
Satish B Shenoy ◽  
Raghuvir Pai
Keyword(s):  
Reynolds Number ◽  
Friction Coefficient ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Load Capacity ◽  
Turbulent Regime ◽  
Load Carrying Capacity ◽  
Static Characteristics ◽  
Load Carrying ◽  
Turbulence Effects

The static characteristics of misaligned three-axial water-lubricated journal bearing in the turbulent regime are analyzed for groove angles 36° and 18°. Ng and Pan’s turbulence model is applied to study the turbulence effects in the journal bearing. The static parameters such as load-carrying capacity, friction coefficient, and side leakage are found for different degree of misalignment (DM). The change in flow regime of the lubricant from laminar to turbulent and the increase in misalignment, improved the load capacity of the bearing. For lightly loaded bearings, the friction coefficient of the bearing increased with the increase in Reynolds number.

Partially Textured Slider and Journal Bearing Analysis

2012 ◽  
Vol 58 (2) ◽  
Author(s):  
T. V. V. L. N. Rao ◽  
A. M. A. Rani ◽  
T. Nagarajan ◽  
F. M. Hashim
Keyword(s):  
Friction Coefficient ◽  
Coefficient Of Friction ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Load Capacity ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Bearing Analysis

The present study examines the influence of partial texturing of bearing surfaces on improvement in load capacity and reduction in friction coefficient for slider and journal bearing. The geometry of partially textured slider and journal bearing considered in this work composed of a number of successive regions of groove and land configurations. The nondimensional pressure expressions for the partially textured slider and journal bearing are derived taking into consideration of texture geometry and extent of partial texture. Partial texturing has a potential to generate load carrying capacity and reduce coefficient of friction, even for nominally parallel bearing surfaces.

SEARCH FOR THE MOST USEFUL GEOMETRY OF AN ACOUSTIC JOURNAL BEARING

Tribologia ◽  
2018 ◽  
Vol 273 (3) ◽  
pp. 15-66 ◽  
Author(s):  
Rafał GAWARKIEWICZ
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Simulations ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Squeeze Film ◽  
Acoustic Levitation ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying

Computer simulations of a number of journal bearing’s geometries utilising acoustic levitation were carried out. The choice of the best geometry depended on the ability of a deformed shape, created by piezo-electric elements, to facilitate squeeze film ultrasonic levitation, and also to create three evenly distributed diverging aerodynamic gaps. Deformations of analysed variants of the bearing’s shape were generated by numerical simulations utilising the finite element method. For the chosen shapes of geometry, prototype bearings were made and their usefulness verified experimentally. As a result, the bearing with the highest load carrying capacity was identified.

Sign in / Sign up

Export Citation Format

Share Document