Skin Friction Correlation for Smooth and Rough Wall Turbulent Boundary Layers

2005 ◽  
Vol 127 (6) ◽  
pp. 1146-1153 ◽  
Author(s):  
D. J. Bergstrom ◽  
O. G. Akinlade ◽  
M. F. Tachie
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Skin Friction ◽  
Surface Condition ◽  
Wire Mesh ◽  
Rough Wall ◽  
Data Sets ◽  
Freestream Velocity ◽  
Wall Flows ◽  
Perforated Sheet

In this paper, we propose a novel skin friction correlation for a zero pressure gradient turbulent boundary layer over surfaces with different roughness characteristics. The experimental data sets were obtained on a hydraulically smooth and ten different rough surfaces created from sand paper, perforated sheet, and woven wire mesh. The physical size and geometry of the roughness elements and freestream velocity were chosen to encompass both transitionally rough and fully rough flow regimes. The flow Reynolds number based on momentum thickness ranged from 3730 to 13,550. We propose a correlation that relates the skin friction, Cf, to the ratio of the displacement and boundary layer thicknesses, δ*∕δ, which is valid for both smooth and rough wall flows. The results indicate that the ratio Cf1∕2∕(δ*∕δ) is approximately constant, irrespective of the Reynolds number and surface condition.

Flow Characteristics of Transitional Boundary Layers on an Airfoil in Wakes

2000 ◽  
Vol 122 (3) ◽  
pp. 522-532 ◽  
Author(s):  
H. Lee ◽  
S.-H. Kang
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Skin Friction ◽  
Velocity Fluctuation ◽  
Plate Boundary ◽  
Flow Characteristics ◽  
Turbulence Models ◽  
Transitional Region ◽  
Mean Velocity ◽  
Measured Velocity

Transition characteristics of a boundary layer on a NACA0012 airfoil are investigated by measuring unsteady velocity using hot wire anemometry. The airfoil is installed in the incoming wake generated by an airfoil aligned in tandem with zero angle of attack. Reynolds number based on the airfoil chord varies from 2.0×105 to 6.0×105; distance between two airfoils varies from 0.25 to 1.0 of the chord length. To measure skin friction coefficient identifying the transition onset and completion, an extended wall law is devised to accommodate transitional flows with pressure gradient and nonuniform inflows. Variations of the skin friction are quite similar to that of the flat plate boundary layer in the uniform turbulent inflow of high intensity. Measured velocity profiles are coincident with families generated by the modified wall law in the range up to y+=40. Turbulence intensity of the incoming wake shifts the onset location of transition upstream. The transitional region becomes longer as the airfoils approach one another and the Reynolds number increases. The mean velocity profile gradually varies from a laminar to logarithmic one during the transition. The maximum values of rms velocity fluctuations are located near y+=15-20. A strong positive skewness of velocity fluctuation is observed at the onset of transition and the overall rms level of velocity fluctuation reaches 3.0–3.5 in wall units. The database obtained will be useful in developing and evaluating turbulence models and computational schemes for transitional boundary layer. [S0098-2202(00)01603-5]

Characterization of the Custom-Designed, High Reynolds Number Water Tunnel

2016 ◽  
Author(s):  
Yasaman Farsiani ◽  
Brian R. Elbing
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Test Section ◽  
High Reynolds Number ◽  
Layer Growth ◽  
Water Tunnel ◽  
Freestream Velocity ◽  
Section Design ◽  
High Reynolds

This paper reports on the characterization of the custom-designed high-Reynolds number recirculating water tunnel located at Oklahoma State University. The characterization includes the verification of the test section design, pump calibration and the velocity distribution within the test section. This includes an assessment of the boundary layer growth within the test section. The tunnel was designed to achieve a downstream distance based Reynolds number of 10 million, provide optical access for flow visualization and minimize inlet flow non-uniformity. The test section is 1 m long with 15.2 cm (6-inch) square cross section and acrylic walls to allow direct line of sight at the tunnel walls. The verification of the test section design was accomplished by comparing the flow quality at different location downstream of the flow inlet. The pump was calibrated with the freestream velocity with three pump frequencies and velocity profiles were measured at defined locations for three pump speeds. Boundary layer thicknesses were measured from velocity profile results and compared with analytical calculations. These measurements were also compared against the facility design calculations.

scholarly journals Assessment of inner–outer interactions in the urban boundary layer using a predictive model

2019 ◽  
Vol 875 ◽  
pp. 44-70 ◽  
Author(s):  
Karin Blackman ◽  
Laurent Perret ◽  
Romain Mathis
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Predictive Model ◽  
Boundary Layers ◽  
Large Scale ◽  
Reynolds Numbers ◽  
Limited Range ◽  
Rough Wall ◽  
Wall Boundary ◽  
Layer Flow

Urban-type rough-wall boundary layers developing over staggered cube arrays with plan area packing density, $\unicode[STIX]{x1D706}_{p}$, of 6.25 %, 25 % or 44.4 % have been studied at two Reynolds numbers within a wind tunnel using hot-wire anemometry (HWA). A fixed HWA probe is used to capture the outer-layer flow while a second moving probe is used to capture the inner-layer flow at 13 wall-normal positions between $1.25h$ and $4h$ where $h$ is the height of the roughness elements. The synchronized two-point HWA measurements are used to extract the near-canopy large-scale signal using spectral linear stochastic estimation and a predictive model is calibrated in each of the six measurement configurations. Analysis of the predictive model coefficients demonstrates that the canopy geometry has a significant influence on both the superposition and amplitude modulation. The universal signal, the signal that exists in the absence of any large-scale influence, is also modified as a result of local canopy geometry suggesting that although the nonlinear interactions within urban-type rough-wall boundary layers can be modelled using the predictive model as proposed by Mathis et al. (J. Fluid Mech., vol. 681, 2011, pp. 537–566), the model must be however calibrated for each type of canopy flow regime. The Reynolds number does not significantly affect any of the model coefficients, at least over the limited range of Reynolds numbers studied here. Finally, the predictive model is validated using a prediction of the near-canopy signal at a higher Reynolds number and a prediction using reference signals measured in different canopy geometries to run the model. Statistics up to the fourth order and spectra are accurately reproduced demonstrating the capability of the predictive model in an urban-type rough-wall boundary layer.

Power Law Velocity Profile in the Turbulent Boundary Layer on Transitional Rough Surfaces

2007 ◽  
Vol 129 (8) ◽  
pp. 1083-1100 ◽  
Author(s):  
Noor Afzal
Keyword(s):  
Boundary Layer ◽  
Functional Equation ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Skin Friction ◽  
Power Law ◽  
Wall Roughness ◽  
Closure Model ◽  
Log Law

A new approach to scaling of transitional wall roughness in turbulent flow is introduced by a new nondimensional roughness scale ϕ. This scale gives rise to an inner viscous length scale ϕν∕uτ, inner wall transitional variable, roughness friction Reynolds number, and roughness Reynolds number. The velocity distribution, just above the roughness level, turns out to be a universal relationship for all kinds of roughness (transitional, fully smooth, and fully rough surfaces), but depends implicitly on roughness scale. The open turbulent boundary layer equations, without any closure model, have been analyzed in the inner wall and outer wake layers, and matching by the Izakson-Millikan-Kolmogorov hypothesis leads to an open functional equation. An alternate open functional equation is obtained from the ratio of two successive derivatives of the basic functional equation of Izakson and Millikan, which admits two functional solutions: the power law velocity profile and the log law velocity profile. The envelope of the skin friction power law gives the log law, as well as the power law index and prefactor as the functions of roughness friction Reynolds number or skin friction coefficient as appropriate. All the results for power law and log law velocity and skin friction distributions, as well as power law constants are explicitly independent of the transitional wall roughness. The universality of these relations is supported very well by extensive experimental data from transitional rough walls for various different types of roughnesses. On the other hand, there are no universal scalings in traditional variables, and different expressions are needed for various types of roughness, such as inflectional roughness, monotonic roughness, and others. To the lowest order, the outer layer flow is governed by the nonlinear turbulent wake equations that match with the power law theory as well as log law theory, in the overlap region. These outer equations are in equilibrium for constant value of m, the pressure gradient parameter, and under constant eddy viscosity closure model, the analytical and numerical solutions are presented.

scholarly journals Evaluation of Skin Friction Drag Reduction in the Turbulent Boundary Layer Using Riblets

2019 ◽  
Vol 9 (23) ◽  
pp. 5199
Author(s):  
Hidemi Takahashi ◽  
Hidetoshi Iijima ◽  
Mitsuru Kurita ◽  
Seigo Koga
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Skin Friction ◽  
Three Dimensional ◽  
Hot Wire ◽  
Friction Drag ◽  
Freestream Velocity ◽  
Turbulent Statistics ◽  
Friction Drag Reduction ◽  
Riblet Surface

A unique approach to evaluate the reduction of skin friction drag by riblets was applied to boundary layer profiles measured in wind tunnel experiments. The proposed approach emphasized the turbulent scales based on hot-wire anemometry data obtained at a sampling frequency of 20 kHz in the turbulent boundary layer to evaluate the skin friction drag reduction. Three-dimensional riblet surfaces were fabricated using aviation paint and were applied to a flat-plate model surface. The turbulent statistics, such as the turbulent scales and intensities, in the boundary layer were identified based on the freestream velocity data obtained from the hot-wire anemometry. Those turbulent statistics obtained for the riblet surface were compared to those obtained for a smooth flat plate without riblets. Results indicated that the riblet surface increased the integral scales and decreased the turbulence intensity, which indicated that the turbulent structure became favorable for reducing skin friction drag. The proposed method showed that the current three-dimensional riblet surface reduced skin friction drag by about 2.8% at a chord length of 67% downstream of the model’s leading edge and at a freestream velocity of 41.7 m/s (Mach 0.12). This result is consistent with that obtained by the momentum integration method based on the pitot-rake measurement, which provided a reference dataset of the boundary layer profile.

scholarly journals On the decay of dispersive motions in the outer region of rough-wall boundary layers

2019 ◽  
Vol 862 ◽  
Author(s):  
Johan Meyers ◽  
Bharathram Ganapathisubramani ◽  
Raúl Bayoán Cal
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Boundary Layers ◽  
Outer Layer ◽  
Stokes Equations ◽  
Outer Region ◽  
Rough Wall ◽  
Rough Boundary ◽  
Mean Flow ◽  
Wall Boundary

In rough-wall boundary layers, wall-parallel non-homogeneous mean-flow solutions exist that lead to so-called dispersive velocity components and dispersive stresses. They play a significant role in the mean-flow momentum balance near the wall, but typically disappear in the outer layer. A theoretical framework is presented to study the decay of dispersive motions in the outer layer. To this end, the problem is formulated in Fourier space, and a set of governing ordinary differential equations per mode in wavenumber space is derived by linearizing the Reynolds-averaged Navier–Stokes equations around a constant background velocity. With further simplifications, analytically tractable solutions are found consisting of linear combinations of $\exp (-kz)$ and $\exp (-Kz)$, with $z$ the wall distance, $k$ the magnitude of the horizontal wavevector $\boldsymbol{k}$, and where $K(\boldsymbol{k},Re)$ is a function of $\boldsymbol{k}$ and the Reynolds number $Re$. Moreover, for $k\rightarrow \infty$ or $k_{1}\rightarrow 0$ (with $k_{1}$ the stream-wise wavenumber), $K\rightarrow k$ is found, in which case solutions consist of a linear combination of $\exp (-kz)$ and $z\exp (-kz)$, and are independent of the Reynolds number. These analytical relations are compared in the limit of $k_{1}=0$ to the rough boundary layer experiments by Vanderwel & Ganapathisubramani (J. Fluid Mech., vol. 774, 2015, R2) and are in reasonable agreement for $\ell _{k}/\unicode[STIX]{x1D6FF}\leqslant 0.5$, with $\unicode[STIX]{x1D6FF}$ the boundary-layer thickness and $\ell _{k}=2\unicode[STIX]{x03C0}/k$.

scholarly journals On the identification of well-behaved turbulent boundary layers

2017 ◽  
Vol 822 ◽  
pp. 109-138 ◽  
Author(s):  
C. Sanmiguel Vila ◽  
R. Vinuesa ◽  
S. Discetti ◽  
A. Ianiro ◽  
P. Schlatter ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Velocity Profile ◽  
Skin Friction ◽  
Boundary Layers ◽  
Shape Factor ◽  
Outer Region ◽  
The Other ◽  
Diagnostic Plot ◽  
Other Hand

This paper introduces a new method based on the diagnostic plot (Alfredsson et al., Phys. Fluids, vol. 23, 2011, 041702) to assess the convergence towards a well-behaved zero-pressure-gradient (ZPG) turbulent boundary layer (TBL). The most popular and well-understood methods to assess the convergence towards a well-behaved state rely on empirical skin-friction curves (requiring accurate skin-friction measurements), shape-factor curves (requiring full velocity profile measurements with an accurate wall position determination) or wake-parameter curves (requiring both of the previous quantities). On the other hand, the proposed diagnostic-plot method only needs measurements of mean and fluctuating velocities in the outer region of the boundary layer at arbitrary wall-normal positions. To test the method, six tripping configurations, including optimal set-ups as well as both under- and overtripped cases, are used to quantify the convergence of ZPG TBLs towards well-behaved conditions in the Reynolds-number range covered by recent high-fidelity direct numerical simulation data up to a Reynolds number based on the momentum thickness and free-stream velocity $Re_{\unicode[STIX]{x1D703}}$ of approximately 4000 (corresponding to 2.5 m from the leading edge) in a wind-tunnel experiment. Additionally, recent high-Reynolds-number data sets have been employed to validate the method. The results show that weak tripping configurations lead to deviations in the mean flow and the velocity fluctuations within the logarithmic region with respect to optimally tripped boundary layers. On the other hand, a strong trip leads to a more energized outer region, manifested in the emergence of an outer peak in the velocity-fluctuation profile and in a more prominent wake region. While established criteria based on skin-friction and shape-factor correlations yield generally equivalent results with the diagnostic-plot method in terms of convergence towards a well-behaved state, the proposed method has the advantage of being a practical surrogate that is a more efficient tool when designing the set-up for TBL experiments, since it diagnoses the state of the boundary layer without the need to perform extensive velocity profile measurements.

Experimental Investigation of Turbulent Boundary Layers Under Favorable Pressure Gradient

2010 ◽  
Author(s):  
Pranav Joshi ◽  
Joseph Katz
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Pressure Gradient ◽  
Skin Friction ◽  
Velocity Profiles ◽  
Skin Friction Coefficient ◽  
Mean Velocity ◽  
Freestream Velocity ◽  
Favorable Pressure Gradient ◽  
The Mean

The goal of this research is to study the effect of favorable pressure gradient (FPG) on the near wall structures of a turbulent boundary layer on a smooth wall. 2D-PIV measurements have been performed in a sink flow, initially at a coarse resolution, to characterize the development of the mean flow and (under resolved) Reynolds stresses. Lack of self-similarity of mean velocity profiles shows that the boundary layer does not attain the sink flow equilibrium. In the initial phase of acceleration, the acceleration parameter, K = v/U2dU/dx, increases from zero to 0.575×10−6, skin friction coefficient decreases and mean velocity profiles show a log region, but lack universality. Further downstream, K remains constant, skin friction coefficient increases and the mean velocity profiles show a second log region away from the wall. In the initial part of the FPG region, all the Reynolds stress components decrease over the entire boundary layer. In the latter phase, they continue to decrease in the middle of the boundary layer, and increase significantly close to the wall (below y∼0.15δ), where they collapse when normalized with the local freestream velocity. Turbulence production and wallnormal transport, scaled with outer units, show self-similar profiles close to the wall in the constant K region. Spanwise-streamwise plane data shows evidence of low speed streaks in the log layer, with widths scaling with the boundary layer thickness.

scholarly journals Numerical simulation of NACA4412 airfoil in pre-stall conditions

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Vincent Gleize ◽  
Michel Costes ◽  
Ivan Mary
Keyword(s):  
Numerical Simulation ◽  
Reynolds Number ◽  
Mach Number ◽  
Skin Friction ◽  
Flow Separation ◽  
Turbulent Mixing ◽  
Design Methodology ◽  
Freestream Velocity ◽  
Content Type ◽  
Laminar Separation

Purpose The purpose of this paper is to study turbulent flow separation at the airfoil trailing edge. This work aims to improve the knowledge of stall phenomenon by creating a QDNS database for the NACA412 airfoil. Design/methodology/approach Quasi-DNS simulations of the NACA 4412 airfoil in pre-stall conditions have been completed. The Reynolds number based on airfoil chord and freestream velocity is equal to 0.35 million, and the freestream Mach number to 0.117. Transition is triggered on both surfaces for avoiding the occurrence of laminar separation bubbles and to ensure turbulent mixing in the wake. Four incidences have been considered, 5, 8 10 and 11 degrees. Findings The results obtained show a reasonably good correlation of the present simulations with classical MSES airfoil simulations and with RANS computations, both in terms of pressure and skin-friction distribution, with an earlier and more extended flow separation in the QDNS. The database thus generated will be deeply analysed and enriched for larger incidences in the future. Originality/value No experimental or HPC numerical database at reasonable Reynolds number exists in the literature. The current work is the first step in that direction.

Investigation of Flow and Mass Transfer on a Flat Plate Downstream of a Shear Inducing Moving Wall

2010 ◽  
Author(s):  
Kalyanjit Ghosh ◽  
R. J. Goldstein
Keyword(s):  
Boundary Layer ◽  
Mass Transfer ◽  
Reynolds Number ◽  
Energy Content ◽  
Turbulent Energy ◽  
Wall Turbulence ◽  
Freestream Velocity ◽  
Moving Wall ◽  
Wall Boundary Layer ◽  
Logarithmic Region

The effects of an opposing (upstream-moving) wall-shear on a two-dimensional turbulent boundary layer are investigated. The shear at the boundary is imparted by a moving belt, flush with the wall. Boundary layer measurements are reported for four surface-to-freestream velocity ratios (0, −0.38, −0.51, −0.63) with the Reynolds number (based on the momentum thickness) between 922 and 1951. Velocity profiles downstream of the moving surface show an increased velocity deficit near the wall, which is more pronounced at higher (negative) belt velocity. Streamwise turbulence values downstream of the belt show the growth of a second peak in the logarithmic region of the boundary layer in addition to the normally-observed peak in the buffer region. This suggests the presence of larger length-scale turbulent eddies at locations away from the wall in the boundary layer. Spectral measurements indicate that the turbulent energy content is distributed over a wide portion of the logarithmic region. Mass transfer measurements using naphthalene sublimation provide the variation of Stanton with Reynolds number on the plate downstream of the moving belt. It shows little difference from the stationary belt case, which suggests that increased wall turbulence is balanced by an increase in the boundary layer thickness.

Sign in / Sign up

Export Citation Format

Share Document