On the Organization of Flow and Heat Transfer in the Near Wake of a Circular Cylinder in Steady and Pulsed Flow

1992 ◽  
Vol 114 (3) ◽  
pp. 348-355 ◽  
Author(s):  
D. P. Telionis ◽  
M. Gundappa ◽  
T. E. Diller
Keyword(s):  
Heat Transfer ◽  
Circular Cylinder ◽  
Skin Friction ◽  
Power Spectra ◽  
Reynolds Numbers ◽  
Driving Frequency ◽  
Near Wake ◽  
Flow And Heat Transfer ◽  
Pulsed Flow ◽  
Oncoming Stream

Skin friction, pressure, and heat transfer gages are employed to monitor the flow and heat transfer field along the periphery of a circular cylinder in steady and pulsed flow at Reynolds numbers, Re = 23,000 to 50,000. Averaged distributions, RMS, and power spectra of all measurements are displayed. Special attention is directed at the organization of the near wake, as detected by the three types of surface gages. The response of the wake to pulsing of the oncoming stream is also examined. It is found that when the wake is locked on the driving frequency, the basic character of the flow is not changed, but the organized motion stands out more clearly. Moreover, the signals become cleaner and background noise in the spectra is reduced. Skin friction and heat transfer gages are shown to respond to local variations of the corresponding quantities, whereas pressure gages respond to global characteristics of the flow.

The Near-Wake of a Circular Cylinder in Crossflow

1968 ◽  
Vol 90 (4) ◽  
pp. 476-483 ◽  
Author(s):  
F. B. Hanson ◽  
P. D. Richardson
Keyword(s):  
Heat Transfer ◽  
Circular Cylinder ◽  
Digital Computer ◽  
Large Body ◽  
Reynolds Numbers ◽  
Hot Wire ◽  
Near Wake ◽  
Random Data ◽  
Hot Wire Anemometry

The flow in the near-wake of a circular cylinder was measured with hot-wire anemometry. Processing of the large body of data on unsteady features of the flow was aided with a digital computer. The major sets of results are for Reynolds numbers of 10,600 and 53,000. The results are presented in several complementary forms. In discussion of the results it is shown how they relate to the generation and maintenance of the Strouhal frequency, the existence and discussion of velocity spikes, the control of heat transfer, and to greater irregularity at lower Reynolds numbers. Some issues are raised in the processing of nonstationary random data.

A Numerical Study of Heat Transfer and Flow Structure in Channels With Miniature V Rib-Dimple Hybrid Structure on One Wall

2018 ◽  
Author(s):  
Peng Zhang ◽  
Yu Rao ◽  
Yanlin Li
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Numerical Simulations ◽  
Numerical Study ◽  
Reynolds Numbers ◽  
Hybrid Structure ◽  
Transfer Enhancement ◽  
Nusselt Numbers ◽  
Flow And Heat Transfer ◽  
Flow Mixing

This paper presents a numerical study on turbulent flow and heat transfer in the channels with a novel hybrid cooling structure with miniature V-shaped ribs and dimples on one wall. The heat transfer characteristics, pressure loss and turbulent flow structures in the channels with the rib-dimples with three different rib heights of 0.6 mm, 1.0 mm and 1.5 mm are obtained for the Reynolds numbers ranging from 18,700 to 60,000 by numerical simulations, which are also compared with counterpart of a pure dimpled and pure V ribbed channel. The results show that the overall Nusselt numbers of the V rib-dimple channel with the rib height of 1.5 mm is up to 70% higher than that of the channels with pure dimples. The numerical simulations show that the arrangement of the miniature V rib upstream each dimple induces complex secondary flow near the wall and generates downwashing vortices, which intensifies the flow mixing and turbulent kinetic energy in the dimple, resulting in significant improvement in heat transfer enhancement and uniformness.

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

scholarly journals The drag-adjoint field of a circular cylinder wake at Reynolds numbers 20, 100 and 500

2013 ◽  
Vol 730 ◽  
pp. 145-161 ◽  
Author(s):  
Qiqi Wang ◽  
Jun-Hui Gao
Keyword(s):  
Circular Cylinder ◽  
Flow Field ◽  
Unsteady Flow ◽  
Numerical Solutions ◽  
Reynolds Numbers ◽  
Adjoint Equations ◽  
Cylinder Wake ◽  
Near Wake ◽  
Navier Stokes Equation ◽  
D 20

AbstractThis paper analyses the adjoint solution of the Navier–Stokes equation. We focus on flow across a circular cylinder at three Reynolds numbers, ${\mathit{Re}}_{D} = 20, 100$ and $500$. The quantity of interest in the adjoint formulation is the drag on the cylinder. We use classical fluid mechanics approaches to analyse the adjoint solution, which is a vector field similar to a flow field. Production and dissipation of kinetic energy of the adjoint field is discussed. We also derive the evolution of circulation of the adjoint field along a closed material contour. These analytical results are used to explain three numerical solutions of the adjoint equations presented in this paper. The adjoint solution at ${\mathit{Re}}_{D} = 20$, a viscous steady state flow, exhibits a downstream suction and an upstream jet, the opposite of the expected behaviour of a flow field. The adjoint solution at ${\mathit{Re}}_{D} = 100$, a periodic two-dimensional unsteady flow, exhibits periodic, bean-shaped circulation in the near-wake region. The adjoint solution at ${\mathit{Re}}_{D} = 500$, a turbulent three-dimensional unsteady flow, has complex dynamics created by the shear layer in the near wake. The magnitude of the adjoint solution increases exponentially at the rate of the first Lyapunov exponent. These numerical results correlate well with the theoretical analysis presented in this paper.

scholarly journals A Stability Analysis of Solutions in Boundary Layer Flow and Heat Transfer of Carbon Nanotubes over a Moving Plate with Slip Effect

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3243 ◽  
Author(s):  
Nur Anuar ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Stability Analysis ◽  
Skin Friction ◽  
Single Wall Carbon Nanotubes ◽  
Slip Effect ◽  
Slip Parameter ◽  
Moving Plate ◽  
Multi Wall Carbon Nanotubes ◽  
Flow And Heat Transfer

The flow and heat transfer characteristics of both single-wall and multi-wall carbon nanotubes (CNTs) with water and kerosene as base fluid on a moving plate with slip effect are studied numerically. By employing similarity transformation, governing equations are transformed into a set of nonlinear ordinary equations. These equations are solved numerically using the bvp4c solver in Matlab which is a very efficient finite difference method. The influence of numerous parameters such as nanoparticle volume fraction, velocity ratio parameter and first order slip parameter on velocity, temperature, skin friction and heat transfer rate are further explored and discussed in the form of graphical and tabular forms. The results reveal that dual solutions exist when the plate and free stream move in the opposite direction and slip parameter was found to widen the range of the possible solutions. However, skin friction coefficients decrease, whereas the heat transfer increases in the presence of slip parameter. Single-wall carbon nanotubes (SWCNTs) give higher skin friction and heat transfer compared to multi-wall carbon nanotubes (MWCNTs) due to the fact that they have higher density and thermal conductivity. A stability analysis is carried out to determine the stability of the solutions obtained.

Sign in / Sign up

Export Citation Format

Share Document