A New Concept of High-Performance Marine Reversing Reduction Gears

1988 ◽  
Vol 110 (4) ◽  
pp. 572-577
Author(s):  
D. J. Folenta
Keyword(s):  
Gas Turbine ◽  
High Performance ◽  
Power Transmission ◽  
High Reliability ◽  
Mechanical Efficiency ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Turbine Engine ◽  
Epicyclic Gear ◽  
Gear Technology

This paper presents a brief description and several illustrations of a new concept of marine reversing gears that utilize high-performance differentially driven epicyclic gear arrangements. This new marine power transmission has the potential to offer high reliability, simplicity, light weight, high mechanical efficiency, compactness, and technological compatibility with aircraft derivative marine gas turbine engines. Further, this new reversing gear minimizes the danger of driving the free turbine in reverse as might be the case with conventional parallel shaft reversing gear arrangements. To illustrate the weight reduction potential, a modern naval ship propulsion system utilizing an aircraft derivative gas turbine engine as the prime mover in conjunction with a conventional parallel shaft reversing gear can be compared to the subject reversing gear differential. A typical 18,642 kW (25,000 hp) marine gas turbine engine might weigh approximately 5000 kg (11,000 lb) and a conventional marine technology parallel shaft reversing gear might weigh on the order of 90,000 to 136,000 kg (200,000 to 300,000 lb). Using gear technology derived from the aircraft industry, a functionally similar differentially driven marine reversing gear might weigh approximately 13,600 kg (30,000 lb).

Case Closed: The Completion of the United States Navy 501-K34 Gas Turbine Engine RADCON Program (2011 - 2019)

2021 ◽  
Author(s):  
Jeffrey S. Patterson ◽  
Kevin Fauvell ◽  
Dennis Russom ◽  
Willie A. Durosseau ◽  
Phyllis Petronello ◽  
...  
Keyword(s):  
United States ◽  
Gas Turbine ◽  
United States Navy ◽  
The United States ◽  
Gas Turbine Engine ◽  
United States Government ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The U.S

Abstract The United States Navy (USN) 501-K Series Radiological Controls (RADCON) Program was launched in late 2011, in response to the extensive damage caused by participation in Operation Tomodachi. The purpose of this operation was to provide humanitarian relief aid to Japan following a 9.0 magnitude earthquake that struck 231 miles northeast of Tokyo, on the afternoon of March 11, 2011. The earthquake caused a tsunami with 30 foot waves that damaged several nuclear reactors in the area. It was the fourth largest earthquake on record (since 1900) and the largest to hit Japan. On March 12, 2011, the United States Government launched Operation Tomodachi. In all, a total of 24,000 troops, 189 aircraft, 24 naval ships, supported this relief effort, at a cost in excess of $90.0 million. The U.S. Navy provided material support, personnel movement, search and rescue missions and damage surveys. During the operation, 11 gas turbine powered U.S. warships operated within the radioactive plume. As a result, numerous gas turbine engines ingested radiological contaminants and needed to be decontaminated, cleaned, repaired and returned to the Fleet. During the past eight years, the USN has been very proactive and vigilant with their RADCON efforts, and as of the end of calendar year 2019, have successfully completed the 501-K Series portion of the RADCON program. This paper will update an earlier ASME paper that was written on this subject (GT2015-42057) and will summarize the U.S. Navy’s 501-K Series RADCON effort. Included in this discussion will be a summary of the background of Operation Tomodachi, including a discussion of the affected hulls and related gas turbine equipment. In addition, a discussion of the radiological contamination caused by the disaster will be covered and the resultant effect to and the response by the Marine Gas Turbine Program. Furthermore, the authors will discuss what the USN did to remediate the RADCON situation, what means were employed to select a vendor and to set up a RADCON cleaning facility in the United States. And finally, the authors will discuss the dispensation of the 501-K Series RADCON assets that were not returned to service, which include the 501-K17 gas turbine engine, as well as the 250-KS4 gas turbine engine starter. The paper will conclude with a discussion of the results and lessons learned of the program and discuss how the USN was able to process all of their 501-K34 RADCON affected gas turbine engines and return them back to the Fleet in a timely manner.

scholarly journals The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters

2020 ◽  
Vol 19 (4) ◽  
pp. 43-57
Author(s):  
H. H. Omar ◽  
V. S. Kuz'michev ◽  
A. O. Zagrebelnyi ◽  
V. A. Grigoriev
Keyword(s):  
Heat Exchanger ◽  
Gas Turbine ◽  
Heat Recovery ◽  
Thermodynamic Cycle ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Working Process ◽  
Turbine Engine ◽  
Recuperative Heat Exchanger

Recent studies related to fuel economy in air transport conducted in our country and abroad show that the use of recuperative heat exchangers in aviation gas turbine engines can significantly, by up to 20...30%, reduce fuel consumption. Until recently, the use of cycles with heat recovery in aircraft gas turbine engines was restrained by a significant increase in the mass of the power plant due to the installation of a heat exchanger. Currently, there is a technological opportunity to create compact, light, high-efficiency heat exchangers for use on aircraft without compromising their performance. An important target in the design of engines with heat recovery is to select the parameters of the working process that provide maximum efficiency of the aircraft system. The article focused on setting of the optimization problem and the choice of rational parameters of the thermodynamic cycle parameters of a gas turbine engine with a recuperative heat exchanger. On the basis of the developed method of multi-criteria optimization the optimization of thermodynamic cycle parameters of a helicopter gas turbine engine with a ANSAT recuperative heat exchanger was carried out by means of numerical simulations according to such criteria as the total weight of the engine and fuel required for the flight, the specific fuel consumption of the aircraft for a ton- kilometer of the payload. The results of the optimization are presented in the article. The calculation of engine efficiency indicators was carried out on the basis of modeling the flight cycle of the helicopter, taking into account its aerodynamic characteristics. The developed mathematical model for calculating the mass of a compact heat exchanger, designed to solve optimization problems at the stage of conceptual design of the engine and simulation of the transport helicopter flight cycle is presented. The developed methods and models are implemented in the ASTRA program. It is shown that optimal parameters of the working process of a gas turbine engine with a free turbine and a recuperative heat exchanger depend significantly on the heat exchanger effectiveness. The possibility of increasing the efficiency of the engine due to heat regeneration is also shown.

The Potential Impact of Future Fuels on Small Gas Turbine Engines

1982 ◽  
Author(s):  
J. A. Saintsbury ◽  
P. Sampath
Keyword(s):  
Gas Turbine ◽  
Operating Experience ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The Future ◽  
Potential Impact ◽  
The Impact ◽  
Whitney Aircraft

The impact of potential aviation gas turbine fuels available in the near to midterm, is reviewed with particular reference to the small aviation gas turbine engine. The future course of gas turbine combustion R&D, and the probable need for compromise in fuels and engine technology, is also discussed. Operating experience to date on Pratt & Whitney Aircraft of Canada PT6 engines, with fuels not currently considered of aviation quality, is reported.

Gas Turbine Power Systems for Military Tracked Vehicles

1983 ◽  
Author(s):  
Geoffrey D. Woodhouse
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Waste Heat ◽  
High Reliability ◽  
Turbine Engines ◽  
Tracked Vehicles ◽  
Turbine Engine ◽  
Response Characteristics ◽  
Air Inlet

The gas turbine engine has been examined as a power plant for military tracked vehicles for over 30 years. Advocates have stressed the potentially high power density and high reliability as factors in favor of the turbine. Several turbine engines have been evaluated experimentally in military tracked vehicles resulting in a better understanding of such aspects as response characteristics and air inlet filtration requirements. Moreover, although the small volume and light weight of aircraft derivative gas turbines have certain virtues, it generally has been concluded that some form of waste heat recuperation is essential to achieve an acceptable level of fuel consumption, despite the increased weight and volume incurred. The selection of the AVCO Lycoming AGT1500 recuperated gas turbine as the power unit for the U.S. Army new M1 “Abrams” main battle tank was a major milestone in the evolution of gas turbine engines for tank propulsion.

Application of Nonparametric Methods to Rainflow Stress Density Estimation of Gas Turbine Engine Usage

2006 ◽  
Author(s):  
M. P. Enright ◽  
R. C. McClung ◽  
S. J. Hudak ◽  
H. R. Millwater
Keyword(s):  
Gas Turbine ◽  
Density Estimation ◽  
High Energy ◽  
Nonparametric Methods ◽  
Gas Turbine Engine ◽  
Estimation Methods ◽  
Turbine Engines ◽  
Density Estimator ◽  
Gas Turbine Engines ◽  
Turbine Engine

The risk of fracture associated with high energy rotating components in aircraft gas turbine engines can be sensitive to small changes in applied stress values which are often difficult to measure and predict. Although a parametric approach is often used to characterize random variables, it is difficult to apply to multimodal densities. Nonparametric methods provide a direct fit to the data, and can be used to estimate the multimodal densities often associated with rainflow stress data. In this paper, a comparison of parametric and nonparametric methods is presented for density estimation of rainflow stress profiles associated with military aircraft gas turbine engine usages. A nonparametric adaptive kernel density estimator algorithm is illustrated for standard parametric probability density functions and for rainflow stress pairs associated with F-16/F100 engine usages. The kernel estimates are compared to parametric estimates, including a hybrid approach based on separate treatment of maximum stress pairs. The results provide some insight regarding the strengths and weaknesses of parametric and nonparametric density estimation methods for gas turbine engines, and can be used to develop improved stress estimates for probabilistic life predictions.

Review of Titanium Application in Gas Turbine Engines

2003 ◽  
Author(s):  
Charles W. Elrod
Keyword(s):  
Gas Turbine ◽  
Selection Process ◽  
Gas Turbine Engine ◽  
Advanced Materials ◽  
Turbine Engines ◽  
Turbine Engine ◽  
Long Run ◽  
Engine Design ◽  
Basic Studies ◽  
Burn Rate

With the continuing desire to make engines with a high thrust to weight advantage, titanium is the metal of choice for the gas turbine engine. The use of titanium in the engine must be considered with reasonable care. The metal has been known to combust under certain conditions. The Air Force conducted a number of studies to evaluate the use of titanium in the engine and in other environments. As a result of the studies the effects the environment, the alloying, the thickness and burn rate were among the conditions evaluated. Also the studies were conducted to determine the self-sustained combustibility of titanium and its alloys in the various situations that were established for the evaluations. The studies considered fifty-four different titanium alloys, which included a sample of most of the current materials, some of the advanced materials and a number of unusual alloys. This effort resulted in the identification of easy to burn, harder to burn and very difficult to burn alloys. With this information we can now look at issues related to where certain alloys would benefit the compressor the most. For example, Ti 6Al4V would most likely be used in the fan section of the compressor, due to the thickness of the blade, the low pressure in that section and the gap above the blade. The compressor has a number of issues that can be partially resolved with the use of titanium in a manner that is consistent with safe procedures. This report will examine these issues and present some considerations that should be considered when applying titanium to the gas turbine engine. This paper will look into the turbine engine and examine those areas where the potential for compressor fires are likely and make suggestions on ways to limit the potential for catastrophic damage and in the long run make the engine more resilient in the future. This paper will examine the problems that have followed the engine development with titanium as one of the major players in the selection process. We will describe some of the technology which makes the use of titanium safer. Titanium will be with the engine technology for some time and the goal of most design and research studies should be to make that time as safe and reliable as possible. This paper will show how research can provide the valuable link from basic studies to engine design.

scholarly journals METHOD OF FORMULATING INPUT PARAMETERS OF NEURAL NETWORK FOR DIAGNOSING GAS-TURBINE ENGINES

Aviation ◽  
2013 ◽  
Vol 17 (2) ◽  
pp. 52-56 ◽  
Author(s):  
Mykola Kulyk ◽  
Sergiy Dmitriev ◽  
Oleksandr Yakushenko ◽  
Oleksandr Popov
Keyword(s):  
Neural Network ◽  
Gas Turbine ◽  
Gas Turbine Engine ◽  
Training Data ◽  
Turbine Engines ◽  
Data Sets ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
Wide Range ◽  
And Training

A method of obtaining test and training data sets has been developed. These sets are intended for training a static neural network to recognise individual and double defects in the air-gas path units of a gas-turbine engine. These data are obtained by using operational process parameters of the air-gas path of a bypass turbofan engine. The method allows sets that can project some changes in the technical conditions of a gas-turbine engine to be received, taking into account errors that occur in the measurement of the gas-dynamic parameters of the air-gas path. The operation of the engine in a wide range of modes should also be taken into account.

scholarly journals Application of the vacuum casting technology in the production of small-size gas turbine engine blade machines

2021 ◽  
Vol 20 (3) ◽  
pp. 152-159
Author(s):  
A. M. Faramazyan ◽  
S. S. Remchukov ◽  
I. V. Demidyuk
Keyword(s):  
Gas Turbine ◽  
Centrifugal Compressor ◽  
Gas Turbine Engine ◽  
Shrinkage Porosity ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Vacuum Casting ◽  
Turbine Engine ◽  
Design Values ◽  
The Cost

The application of casting technologies in the production of parts and assemblies of small-size gas turbine engines is justified in the paper. The technology of vacuum casting in gypsum molds was tested during the production of an experimental centrifugal compressor of a small-size gas turbine engine. On the basis of a 3D model of the designed centrifugal compressor, computational studies of vacuum casting were carried out and rational parameters of the technological process were determined. Prototypes of the developed centrifugal compressor of a small-size gas turbine engine were made. The results of calculations and the performed technological experiment confirmed the fill rate of the gating form and the absence of short pour. The distribution of shrinkage porosity and cavities corresponds to the design values and is concentrated in the central part of the casting that is subjected to subsequent machining. The area of the blades, disc and sleeve is formed without defects. The use of casting technologies in the production of parts and assemblies of small-size gas turbine engines assures the required quality with a comparatively low price of the finished product, making it possible to achieve the balance between the cost of the technology and the quality of the product made according to this technology.

Technological Trend of Aircraft Gas Turbines and its Effect on the Development for Ship Propulsion Plants

1970 ◽  
Author(s):  
N. K. H. Scholz
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Pressure Ratio ◽  
Gas Turbine Engine ◽  
Design Parameters ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Compression Pressure ◽  
Turbine Engine ◽  
Ship Propulsion

The effect of the main design parameters of the aero gas turbine engine cycle, namely combustion temperature and compression pressure ratio, on the specific performance values is discussed. The resulting development trend has been of essential influence on the technology. Relevant approaches are outlined. The efforts relating to weight and manufacturing expense are also indicated. In the design of aero gas turbine engines increasing consideration is given to the specific flight mission requirements, such as for instance by the introduction of the by-pass principle. Therefore direct application of aero gas turbine engines for ship propulsion without considerable modifications, as has been practiced in the past, is not considered very promising for the future. Nevertheless, there are possibilities to take advantage of aero gas turbine engine developments for ship propulsion systems. Appropriate approaches are discussed. With the experience obtained from aero gas turbine engines that will enter service in the early seventies it should be possible to develop marine gas turbine engines achieving consumptions and lifes that are competitive with those of advanced diesel units.

A Probabilistic Framework for Risk Prediction of Gas Turbine Engine Components With Inherent or Induced Material Anomalies

2005 ◽  
Author(s):  
Michael P. Enright ◽  
R. Craig McClung ◽  
Luc Huyse
Keyword(s):  
Risk Assessment ◽  
Gas Turbine ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Manufacturing Processes ◽  
Gas Turbine Engines ◽  
Probabilistic Framework ◽  
Turbine Engine ◽  
Risk Of Fracture ◽  
Engine Components

Rare anomalies may be introduced during the metallurgical or manufacturing processes that may lead to uncontained failures of aircraft gas turbine engines. The risk of fracture associated with these anomalies can be quantified using a probabilistic fracture mechanics approach. In this paper, a general probabilistic framework is presented for risk assessment of gas turbine engine components subjected to either inherent or induced material anomalies. A summary of efficient computational methods that are applicable to this problem is also provided.

Sign in / Sign up

Export Citation Format

Share Document