Radiative Transfer With Dependent Scattering by Particles: Part 2—Experimental Investigation

1986 ◽  
Vol 108 (3) ◽  
pp. 614-618 ◽  
Author(s):  
Y. Yamada ◽  
J. D. Cartigny ◽  
C. L. Tien
Keyword(s):  
Experimental Data ◽  
Experimental Investigation ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Small Particles ◽  
Particle Volume ◽  
Water Matrix ◽  
Test Cells ◽  
Radiative Scattering ◽  
Regime Map

Dependent radiative scattering by particles is experimentally investigated using plane-parallel cells containing latex spheres of 11, 2, and 0.08 μm diameter dispersed in an air or water matrix. The dependent scattering efficiencies and the bidirectional transmittance and reflectance were measured and compared with analytical results. The close-packed 2-μm spheres, which were expected to show dependent scattering from the previous criterion, gave results identical to independent scattering. Measured dependent scattering efficiencies of the small particles tested decrease with increasing particle volume fraction and were compared with those predicted by the theoretical investigation. The bidirectional transmittance and reflectance of dependent scattering were compared with those of independent scattering with the same number of spheres within the test cells. Several different patterns of dependent transmittance and reflectance appeared depending on the optical thickness. Finally, a newly proposed regime map bounding independent and dependent scattering is compared with the present and previous experimental data.

Experimental Investigation of Submerged Impinging Jet Using Cu-Water Nanofluid

2010 ◽  
Author(s):  
Qiang Li ◽  
Yimin Xuan ◽  
Feng Yu ◽  
Junjie Tan
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Volume Fraction ◽  
Cooling System ◽  
Heated Surface ◽  
Particle Volume Fraction ◽  
Jet Impingement ◽  
Particle Volume ◽  
Impingement Cooling ◽  
System Pressure

An experimental investigation was performed to study the heat transfer and flow features of Cu-water nanofluids (Cu particles with 26 nm diameter) in a submerged jet impingement cooling system. Three particular nozzle-to-heated surface distances (2, 4 and 6 mm) and four particle volume fractions (1.5%, 2.0%, 2.5% and 3.0%) are involved in the experiment. The experimental results reveal that the suspended nanoparticles increase the heat transfer performance of the base liquid in the jet impingement cooling system. Within the range of experimental parameters considered, it has been found that highest surface heat transfer coefficients can be achieved using a nozzle-to-surface distance of 4 mm and the nanofluid with 3.0% particle volume fraction. In addition, the experiments show that the system pressure drop of the dilute nanofluids is almost equal to that of water under the same entrance velocity.

Radiative Transfer With Dependent Scattering by Particles: Part 1—Theoretical Investigation

1986 ◽  
Vol 108 (3) ◽  
pp. 608-613 ◽  
Author(s):  
J. D. Cartigny ◽  
Y. Yamada ◽  
C. L. Tien
Keyword(s):  
Radiative Transfer ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Spherical Particles ◽  
Sphere Model ◽  
Radiation Scattering ◽  
Particle Volume ◽  
Scattering Approximation ◽  
Regime Map ◽  
Packed Sphere

Dependent radiation scattering for which the independent scattering theory fails to predict the scattering properties is important in analyzing radiative transfer in packed and fluidized beds. In this paper the dependent scattering properties have been derived assuming the Rayleigh–Debye scattering approximation for two cases: two identical spheres and a cloud of spherical particles. The two-sphere calculated results compare well with the exact solutions in the literature, giving confidence in the present analytical approach. The gas model and packed-sphere model have been employed to calculate dependent scattering properties for a cloud of particles of small and large particle volume fraction, respectively. The calculated dependent scattering efficiencies for a cloud of particles are smaller than the independent scattering efficiencies and decrease with increasing particle volume fraction. A regime map for independent and dependent scattering has been constructed and compared with existing empirical criteria.

Dependence of Thermal Conductivity and Mechanical Rigidity of Particle-Laden Polymeric Thermal Interface Material on Particle Volume Fraction

2003 ◽  
Vol 125 (3) ◽  
pp. 386-391 ◽  
Author(s):  
Ravi S. Prasher ◽  
Paul Koning ◽  
James Shipley ◽  
Amit Devpura
Keyword(s):  
Experimental Data ◽  
Thermal Conductivity ◽  
Mechanical Response ◽  
Volume Fraction ◽  
Effective Medium Theory ◽  
Particle Volume Fraction ◽  
Thermal Interface Material ◽  
Particle Volume ◽  
Thermal Interface ◽  
Medium Theory

This paper reports the measurement of the thermal conductivity of particle-laden polymeric thermal interface materials for three different particle volume fractions. The experimental data are further compared with the percolation model and effective medium theory. We then introduce a method of obtaining the contact resistance between the particles and the polymeric matrix by a combination of percolation modeling and experimental data. We also discuss the dependence of the mechanical response of these particle-laden polymers for different filler or particle loading. A novel mechanical length scale is defined to understand the mechanical response of these materials, and is correlated to the viscosity of these materials.

Development and Validation of Two-Way Fluid-Particle Coupling in Turbulent Flows for a CFD Code

2013 ◽  
Author(s):  
Jianjun Xiao ◽  
Anatoly Svishchev ◽  
Thomas Jordan
Keyword(s):  
Experimental Data ◽  
Turbulent Flows ◽  
Gas Flow ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Continuous Phase ◽  
Particle Dispersion ◽  
Solid Particles ◽  
Particle Volume ◽  
Discrete Phase

A Lagrangian approach was used in CFD code GASFLOW to describe particle dispersion in turbulent flows. One-way coupling between fluid and particle is often used due to its simplicity of implementation. However, in case of higher particle volume fraction or mass loading in the continuous phase, one-way coupling is not sufficient to simulate the interaction between fluid and particles. For instance, the liquid droplets released by a spray nozzle in the nuclear power plant will lead to a strong gas entrainment, and consequently impact the gas flow field. When the volume fraction of the discrete phase is not negligible compared to the continuous phase, the interaction between the continuous fluid and dispersed phase becomes significant. Two-way momentum coupling between fluid and solid particles was developed in CFD code GASFLOW. The dynamics of the discrete particles was solved by an implicit algorithm to ensure the numerical stability. The contribution of all particles to a fluid cell was treated as the source term to the continuous phase which was solved with Arbitrary-Lagrangian-Eulerian (ALE) methodology. In order to verify and validate the code, the calculation results were then compared to theoretical results, predictions of other CFD codes and experimental data. Predictions compared favorably with the experimental data. It indicates that the effect of two-way coupling is significant when the volume fraction of discrete phase is not negligible. Two-way coupling of mass, energy and turbulence will be implemented in the future development of the GASFLOW code.

scholarly journals Eulerian-Eulerian Simulation of Particle-Liquid Slurry Flow in Horizontal Pipe

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Titus Ntow Ofei ◽  
Aidil Yunus Ismail
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Radial Distribution ◽  
Pressure Loss ◽  
Particle Concentration ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Turbulence Models ◽  
Particle Volume ◽  
Horizontal Pipe

In this study, a computational fluid dynamics (CFD) simulation which adopts the inhomogeneous Eulerian-Eulerian two-fluid model in ANSYS CFX-15 was used to examine the influence of particle size (90 μm to 270 μm) and in situ particle volume fraction (10% to 40%) on the radial distribution of particle concentration and velocity and frictional pressure loss. The robustness of various turbulence models such as the k-epsilon (k-ε), k-omega (k-ω), SSG Reynolds stress, shear stress transport, and eddy viscosity transport was tested in predicting experimental data of particle concentration profiles. The k-epsilon model closely matched the experimental data better than the other turbulence models. Results showed a decrease in frictional pressure loss as particle size increased at constant particle volume fraction. Furthermore, for a constant particle volume fraction, the radial distribution of particle concentration increased with increasing particle size, where high concentration of particles occurred at the bottom of the pipe. Particles of size 90 μm were nearly buoyant especially for high particle volume fraction of 40%. The CFD study shows that knowledge of the variation of these parameters with pipe position is very crucial if the understanding of pipeline wear, particle attrition, or agglomeration is to be advanced.

Effect of Particle Volume Fraction on the Thermal Conductivity and Mechanical Rigidity of Particle-Laden Polymeric Thermal Interface Material

2001 ◽  
Author(s):  
Ravi S. Prasher ◽  
Paul Koning ◽  
James Shipley ◽  
Amit Devpura
Keyword(s):  
Experimental Data ◽  
Thermal Conductivity ◽  
Mechanical Response ◽  
Volume Fraction ◽  
Effective Medium Theory ◽  
Particle Volume Fraction ◽  
Thermal Interface Material ◽  
Particle Volume ◽  
Thermal Interface ◽  
Medium Theory

Abstract This paper reports the measurement of the thermal conductivity of particle-laden polymeric thermal interface materials for three different particle volume fraction. The experimental data is further compared with the percolation model and effective medium theory. This paper also introduces a method of obtaining the contact resistance between the particles and the polymeric matrix by combination of percolation modeling and experimental data. We also discuss the dependence of the mechanical response of these particle-laden polymers for different filler or particle loading. A novel mechanical length scale is defined to understand the mechanical response of these materials and is correlated to the viscosity of these materials.

scholarly journals Performance improvement of double-tube gas cooler in CO2 refrigeration system using nanofluids

2015 ◽  
Vol 19 (1) ◽  
pp. 109-118 ◽  
Author(s):  
Jahar Sarkar
Keyword(s):  
Performance Improvement ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Cooling Capacity ◽  
Inlet Temperature ◽  
Refrigeration Cycle ◽  
Particle Volume ◽  
Transcritical Carbon Dioxide ◽  
The Given ◽  
Theoretical Analyses

The theoretical analyses of the double-tube gas cooler in transcritical carbon dioxide refrigeration cycle have been performed to study the performance improvement of gas cooler as well as CO2 cycle using Al2O3, TiO2, CuO and Cu nanofluids as coolants. Effects of various operating parameters (nanofluid inlet temperature and mass flow rate, CO2 pressure and particle volume fraction) are studied as well. Use of nanofluid as coolant in double-tube gas cooler of CO2 cycle improves the gas cooler effectiveness, cooling capacity and COP without penalty of pumping power. The CO2 cycle yields best performance using Al2O3-H2O as a coolant in double-tube gas cooler followed by TiO2-H2O, CuO-H2O and Cu-H2O. The maximum cooling COP improvement of transcritical CO2 cycle for Al2O3-H2O is 25.4%, whereas that for TiO2-H2O is 23.8%, for CuO-H2O is 20.2% and for Cu-H2O is 16.2% for the given ranges of study. Study shows that the nanofluid may effectively use as coolant in double-tube gas cooler to improve the performance of transcritical CO2 refrigeration cycle.

A simulation and experimental study on particle volume fraction of PMMA suspension in centrifugal fields

2021 ◽  
Author(s):  
Yosephus Ardean Kurnianto Prayitno ◽  
Tong Zhao ◽  
Yoshiyuki Iso ◽  
Masahiro Takei
Keyword(s):  
Experimental Study ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Particle Volume
Sign in / Sign up

Export Citation Format

Share Document