Thermo-EHD Analysis of Lubrication of Helical Gears

1988 ◽  
Vol 110 (3) ◽  
pp. 330-336 ◽  
Author(s):  
V. Simon
Keyword(s):  
Regression Analysis ◽  
Carrying Capacity ◽  
Power Loss ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
Helical Gears ◽  
Oil Film ◽  
Gear Teeth ◽  
Temperature Distributions ◽  
Load Carrying

The full thermal elastohydrodynamic analysis of lubrication of helical gears is presented. A numerical solution of the coupled Reynolds, elasticity, energy, and Laplace’s equations for the oil film shape, pressure and temperature distributions in the oil film, and temperature distribution in gear teeth is obtained. The effects of gear parameters and operating conditions on EHD performance characteristics is discussed. Based on the obtained results, by regression analysis, equations are derived to calculate the EHD load carrying capacity, maximum oil temperature, and power loss.

Computational Fluid Dynamics Thermohydrodynamic Analysis of Three-Dimensional Sector-Pad Thrust Bearings With Rectangular Dimples

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
C. I. Papadopoulos ◽  
L. Kaiktsis ◽  
M. Fillon
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Carrying Capacity ◽  
Thermal Effects ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
Performance Indices ◽  
Thrust Bearings ◽  
Load Carrying ◽  
Texture Design

The paper presents a detailed computational study of flow patterns and performance indices in a dimpled parallel thrust bearing. The bearing consists of eight pads; the stator surface of each pad is partially textured with rectangular dimples, aiming at maximizing the load carrying capacity. The bearing tribological performance is characterized by means of computational fluid dynamics (CFD) simulations, based on the numerical solution of the Navier–Stokes and energy equations for incompressible flow. Realistic boundary conditions are implemented. The effects of operating conditions and texture design are studied for the case of isothermal flow. First, for a reference texture pattern, the effects of varying operating conditions, in particular minimum film thickness (thrust load), rotational speed and feeding oil pressure are investigated. Next, the effects of varying texture geometry characteristics, in particular texture zone circumferential/radial extent, dimple depth, and texture density on the bearing performance indices (load carrying capacity, friction torque, and friction coefficient) are studied, for a representative operating point. For the reference texture design, the effects of varying operating conditions are further investigated, by also taking into account thermal effects. In particular, adiabatic conditions and conjugate heat transfer at the bearing pad are considered. The results of the present study indicate that parallel thrust bearings textured by proper rectangular dimples are characterized by substantial load carrying capacity levels. Thermal effects may significantly reduce load capacity, especially in the range of high speeds and high loads. Based on the present results, favorable texture designs can be assessed.

Study on Tribological Performances for Textured Bearing of ICE

2013 ◽  
Vol 690-693 ◽  
pp. 1999-2002
Author(s):  
Fan Ming Meng ◽  
Tao Yang ◽  
Tao Long
Keyword(s):  
Friction Coefficient ◽  
Internal Combustion Engine ◽  
Carrying Capacity ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Load Carrying Capacity ◽  
Oil Film ◽  
Load Carrying ◽  
Inner Surface ◽  
Coupling Algorithm

The influence of dimples on the inner surface of big end bearing in internal combustion engine (ICE) on tribological performances of the bearing was investigated based on Navier-Strokes equation and other associated equations. In doing so, the CFD modulus in the software ANSYS12 version is used to analyze the dimple effect on the tribological performances of the bearing using two-way fluid-solid coupling algorithm. Some mechanisms are revealed about the dimple effect on the load-carrying capacity and friction coefficient of oil film, and the deformation and stress for the textured big end bearing.

Static and dynamic performance characteristics of powder lubricated symmetrical three-lobed bearing

2020 ◽  
pp. 135065012092632
Author(s):  
Jijo Jose ◽  
Niranjana Behera
Keyword(s):  
Carrying Capacity ◽  
Elevated Temperatures ◽  
Dynamic Performance ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
Oil Degradation ◽  
Static And Dynamic Characteristics ◽  
Load Carrying ◽  
The Coefficient Of Friction ◽  
Ellipticity Ratio

Hydrodynamic oil bearings applied at elevated temperatures and extreme operating conditions are subjected to the problem of oil degradation. In order to overcome such conditions, dry powder lubricants are used as lubricants in the hydrodynamic journal bearings. Thus the problem of thermal degradation of oil at high temperatures can be eliminated. In this work, the static and dynamic characteristics of a symmetric three-lobed bearing lubricated with powdered particles have been predicted. Influence of the ellipticity ratio on the performance of the three-lobed bearing has also been investigated. It is observed that an increase in the ellipticity ratio increases the coefficient of friction and stability, but decreases the side leakage and the load carrying capacity of the three-lobed bearing. Also, it was observed that the large-sized powdered particles induce better load carrying capacity and better stability than the small-sized particles.

Optimal Tooth Modifications in Face-Hobbed Spiral Bevel Gears to Reduce the Influence of Misalignments on Elastohydrodynamic Lubrication

2014 ◽  
Vol 136 (7) ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Carrying Capacity ◽  
Optimization Procedure ◽  
Load Carrying Capacity ◽  
Power Losses ◽  
Spiral Bevel Gears ◽  
Oil Film ◽  
Bevel Gears ◽  
Ehd Lubrication ◽  
Load Carrying ◽  
Spiral Bevel

In this study, an optimization methodology is proposed to systematically define the optimal tooth modifications introduced by head-cutter geometry and machine-tool settings to minimize the influence of misalignments on the elastohydrodynamic (EHD) lubrication characteristics in face-hobbed spiral bevel gears. The goal is to simultaneously maximize the EHD load-carrying capacity of the oil film and to minimize power losses in the oil film when different misalignments are inherent in the gear pair. The proposed optimization procedure relies heavily on the EHD lubrication analysis developed in this paper. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. A drastic increase in the EHD load-carrying capacity of the oil film and a reduction in the power losses in the oil film were obtained.

Influence of Position Errors on EHD Lubrication in Spiral Bevel Gears

2010 ◽  
Author(s):  
Vilmos Simon
Keyword(s):  
Friction Factor ◽  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Oil Viscosity ◽  
Spiral Bevel Gears ◽  
Oil Film ◽  
Bevel Gears ◽  
Ehd Lubrication ◽  
Load Carrying ◽  
Spiral Bevel

The thermal elastohydrodynamic analysis of lubrication is applied to investigate the influence of misalignments of the meshing members on lubrication in spiral bevel gears. The calculation is based on the simultaneous solution of the Reynolds, elasticity, energy, and Laplace’s equations. The full thermal EHD lubrication analysis is applied, therefore, the oil viscosity variation with respect to pressure and temperature and the density variation with respect to pressure are included. By using the corresponding computer program, the influence of pinion’s running offset and axial adjustment errors, and angular position error of pinion axis on maximum oil film pressure and temperature, EHD load carrying capacity, and on power losses in the oil film is investigated. On the basis of the obtained results it can be concluded that the EHD load carrying capacity and the friction factor are very sensitive to misalignments of the mating members in the spiral bevel gear pair, the friction factor is reduced by the increase of EHD load carrying capacity and vise versa, and the maximum inlet oil temperature is almost insensitive to the misalignments.

Matching the relationship between rotational speed and load-carrying capacity on high-speed and heavy-load hydrostatic thrust bearing

2018 ◽  
Vol 70 (1) ◽  
pp. 8-14 ◽  
Author(s):  
Xiao-dong Yu ◽  
Lei Geng ◽  
Xiao-jun Zheng ◽  
Zi-xuan Wang ◽  
Xiao-gang Wu
Keyword(s):  
Carrying Capacity ◽  
Rotational Speed ◽  
Thrust Bearing ◽  
Lubricating Oil ◽  
Load Carrying Capacity ◽  
Average Pressure ◽  
Content Type ◽  
Oil Film ◽  
Hydrostatic Bearing ◽  
Load Carrying

Purpose Rotational speed and load-carrying capacity are two mutual coupling factors which affect high precision and stable operation of a hydrostatic thrust bearing. The purpose of this paper is to study reasonable matching relationship between the rotational speed and the load-carrying capacity. Design/methodology/approach A mathematical model of relationship between the rotational speed and the load-carrying capacity of the hydrostatic bearing with double-rectangle recess is set up on the basis of the tribology theory and the lubrication theory, and the load and rotational speed characteristics of an oil film temperature field and a pressure field in the hydrostatic bearing are analyzed, reasonable matching relationship between the rotational speed and the load-carrying capacity is deduced and a verification experiment is conducted. Findings By increasing the rotational speed, the oil film temperature increases, the average pressure decreases and the load-carrying capacity decreases. By increasing the load-carrying capacity, the oil film temperature and the average pressure increases and the rotational speed decreases; corresponding certain reasonable matching values are available. Originality/value The load-carrying capacity can be increased and the rotational speed improved by means of reducing the friction area of the oil recess by using low-viscosity lubricating oil and adding more oil film clearance; but, the stiffness of the hydrostatic bearing decreases.

Lubrication Capacity of Gears of Circular-Arc Tooth-Profile

1988 ◽  
Vol 110 (4) ◽  
pp. 699-703 ◽  
Author(s):  
Awny Y. Attia ◽  
Ahmed M. M. El-Bahloul
Keyword(s):  
Film Thickness ◽  
Carrying Capacity ◽  
Helix Angle ◽  
Load Carrying Capacity ◽  
Test Rig ◽  
Oil Viscosity ◽  
Oil Film ◽  
Lubricant Oil ◽  
Linear Dimensions ◽  
Load Carrying

The paper presents the results of an experimental investigation carried out at Mansoura University Laboratories aiming at studying the effect of change of speed, oil viscosity, and helix angle on the load carrying capacity of the oil film. A three pairs of test gears of 6 DP, 91.5 mm pitch diameter with 22.3, 33.6 and 42.25 deg helix angles were run in power circulating test rig at 100 to 3000 r.p.m. speeds and transmitting tooth load ranging from 185 to 1090 Kp. The test gears were lubricated with oils of 200, 462, and 653 cSt at 40°C kinematic viscosities. The oil film thicknesses between contacting teeth were measured by measuring the changes in capacitance between test gears and transferred to linear dimensions by calibration curves drawn by knowing the changes in capacitance through the gaps between teeth of values known through the amount of backlash. The experimental results show that; Oil film thickness decreases with tooth load, while increases with speed and viscosity of the lubricant. Oil film thickness versus helix angle give an inversed parabola for the smallest and medium tooth loads, while oil film thickness decreases with increasing the helix angle under increased tooth loads. Load carrying capacity increases with speeds and viscosity of the lubricant while decreases with increasing the helix angle.

Paper 1: The Hydrodynamics of Flat Contacts: Friction Studies in the Pin and Disc Machine

1965 ◽  
Vol 180 (11) ◽  
pp. 49-60
Author(s):  
W. G. Robertson ◽  
D. T. Spillman
Keyword(s):  
Carrying Capacity ◽  
Electrical Contact ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
Practical Application ◽  
Test Rig ◽  
Mineral Oils ◽  
Wide Range ◽  
Load Carrying ◽  
Flat Steel

The friction of run-in flat steel specimens lubricated with plain mineral oils has been measured in a pin and disc machine over a wide range of operating conditions. The hydrodynamic region was identified with the aid of electrical contact measurements and the corresponding friction data were considered in terms of the various theories which have been proposed to explain hydrodynamic action in nominally flat sliding contacts. It was concluded that the Lewicki inflow, the surface roughness, and the viscosity-density wedge mechanisms could not explain the observed friction; but that it could be explained if the surfaces formed a wedge whose angle was constant over the whole range of operating conditions. It is suggested that the wedge may be formed during the running-in process by mechanical effects such as flexural distortion. Particularly striking is the strength of the hydrodynamics which can occur in such ‘flat’ contacts: in terms of the wedge analysis the contact was operating close to the maximum theoretical load-carrying capacity. The implications with respect to the use of the pin and disc machine as a test rig are discussed and it is suggested that there might be a practical application in the design of ‘self-adjusting‘ slider bearings.

Sign in / Sign up

Export Citation Format

Share Document