Evaluation of Design Performance of the Semi-Closed Oxy-Fuel Combustion Combined Cycle

2012 ◽  
Vol 134 (11) ◽  
Author(s):  
H. J. Yang ◽  
D. W. Kang ◽  
J. H. Ahn ◽  
T. S. Kim
Keyword(s):  
Co2 Capture ◽  
Gas Turbines ◽  
Fuel Combustion ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Separation Unit ◽  
Turbine Inlet

This study aims to present various design aspects and realizable performance of the natural gas fired semi-closed oxy-fuel combustion combined cycle (SCOC-CC). The design parameters of the cycle are set up on the basis of the component technologies of today’s state-of-the-art gas turbines with a turbine inlet temperature between 1400 °C and 1600 °C. The most important part of the cycle analysis is the turbine cooling, which considerably affects the cycle performance. A thermodynamic cooling model is introduced in order to predict the reasonable amount of turbine coolant needed to maintain the turbine blade temperature of the SCOC-CC at the levels of those of conventional gas turbines. The optimal pressure ratio ranges of the SCOC-CC for two different turbine inlet temperature levels are researched. The performance penalty due to the CO2 capture is examined. The influences of the purity of the oxygen provided by the air separation unit on the cycle performance are also investigated. A comparison with the conventional combined cycle, adopting a postcombustion CO2 capture, is carried out, taking into account the relationship between the performance and the CO2 capture rate.

Evaluation of Design Performance of the Semi-Closed Oxy-Fuel Combustion Combined Cycle

2012 ◽  
Author(s):  
H. J. Yang ◽  
D. W. Kang ◽  
J. H. Ahn ◽  
T. S. Kim
Keyword(s):  
Co2 Capture ◽  
Gas Turbines ◽  
Fuel Combustion ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Separation Unit ◽  
Turbine Inlet

This study aims to present various design aspects and realizable performance of the natural gas fired semi-closed oxy-fuel combustion combined cycle (SCOC-CC). Design parameters of the cycle are set up on the basis of component technologies of today’s state-of-the-art gas turbines with a turbine inlet temperature between 1400°C and 1600°C. The most important part in the cycle analysis is the turbine cooling which affects the cycle performance considerably. A thermodynamic cooling model is introduced to predict the reasonable amount of turbine coolant to maintain the turbine blade temperature of the SCOC-CC at the levels of those of conventional gas turbines. Optimal pressure ratio ranges of the SCOC-CC for two different turbine inlet temperature levels are searched. The performance penalty due to the CO2 capture is examined. Also investigated are the influences of the purity of oxygen provided by the air separation unit on the cycle performance. A comparison with the conventional combined cycle adopting a post-combustion CO2 capture is carried out taking into account the relationship between performance and CO2 capture rate.

Expanding Fuel Flexibility in MHPS’ Dry Low NOx Combustor

2018 ◽  
Author(s):  
Katsuyoshi Tada ◽  
Kei Inoue ◽  
Tomo Kawakami ◽  
Keijiro Saitoh ◽  
Satoshi Tanimura
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Environmental Conservation ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Social Perspectives ◽  
Turbine Inlet ◽  
Fuel Flexibility

Gas-turbine combined-cycle (GTCC) power generation is clean and efficient, and its demand will increase in the future from economic and social perspectives. Raising turbine inlet temperature is an effective way to increase combined cycle efficiency and contributes to global environmental conservation by reducing CO2 emissions and preventing global warming. However, increasing turbine inlet temperature can lead to the increase of NOx emissions, depletion of the ozone layer and generation of photochemical smog. To deal with this issue, MHPS (MITSUBISHI HITACHI POWER SYSTEMS) and MHI (MITSUBISHI HEAVY INDUSTRIES) have developed Dry Low NOx (DLN) combustion techniques for high temperature gas turbines. In addition, fuel flexibility is one of the most important features for DLN combustors to meet the requirement of the gas turbine market. MHPS and MHI have demonstrated DLN combustor fuel flexibility with natural gas (NG) fuels that have a large Wobbe Index variation, a Hydrogen-NG mixture, and crude oils.

scholarly journals Parametric Investigation and Thermoeconomic Optimization of a Combined Cycle for Recovering the Waste Heat from Nuclear Closed Brayton Cycle

2016 ◽  
Vol 2016 ◽  
pp. 1-12
Author(s):  
Lihuang Luo ◽  
Hong Gao ◽  
Chao Liu ◽  
Xiaoxiao Xu
Keyword(s):  
Mass Fraction ◽  
Waste Heat ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Inlet Temperature ◽  
Brayton Cycle ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Overall Efficiency ◽  
Economic Analyses

A combined cycle that combines AWM cycle with a nuclear closed Brayton cycle is proposed to recover the waste heat rejected from the precooler of a nuclear closed Brayton cycle in this paper. The detailed thermodynamic and economic analyses are carried out for the combined cycle. The effects of several important parameters, such as the absorber pressure, the turbine inlet pressure, the turbine inlet temperature, the ammonia mass fraction, and the ambient temperature, are investigated. The combined cycle performance is also optimized based on a multiobjective function. Compared with the closed Brayton cycle, the optimized power output and overall efficiency of the combined cycle are higher by 2.41% and 2.43%, respectively. The optimized LEC of the combined cycle is 0.73% lower than that of the closed Brayton cycle.

Gas Properties as a Limit to Gas Turbine Performance

2002 ◽  
Author(s):  
R. C. Wilcock ◽  
J. B. Young ◽  
J. H. Horlock
Keyword(s):  
Gas Turbines ◽  
Industrial Development ◽  
Pressure Ratio ◽  
Cycle Performance ◽  
Working Fluid ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Cycle Efficiency ◽  
Gas Properties

Although increasing the turbine inlet temperature has traditionally proved the surest way to increase cycle efficiency, recent work suggests that the performance of future gas turbines may be limited by increased cooling flows and losses. Another limiting scenario concerns the effect on cycle performance of real gas properties at high temperatures. Cycle calculations of uncooled gas turbines show that when gas properties are modelled accurately, the variation of cycle efficiency with turbine inlet temperature at constant pressure ratio exhibits a maximum at temperatures well below the stoichiometric limit. Furthermore, the temperature at the maximum decreases with increasing compressor and turbine polytropic efficiency. This behaviour is examined in the context of a two-component model of the working fluid. The dominant influences come from the change of composition of the combustion products with varying air/fuel ratio (particularly the contribution from the water vapour) together with the temperature variation of the specific heat capacity of air. There are implications for future industrial development programmes, particularly in the context of advanced mixed gas-steam cycles.

scholarly journals Effect of Pressure and Turbine Inlet Temperature on the Efficiency of Pressurized Fluidized Bed Power Plants

1980 ◽  
Author(s):  
R. L. Graves
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Fluidized Bed ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Development Effort ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Wide Range

The difficulties encountered in past and present efforts to operate direct coal-fired gas turbines are substantial. Hence the development effort required to assure a reliable, high-temperature pressurized fluidized bed (PFBC) combined cycle may be very expensive and time consuming. It is, therefore, important that the benefit of achieving high-temperature operation, which is primarily increased efficiency, be clearly understood at the outset of such a development program. This study characterizes the effects of PFBC temperature and pressure on plant efficiency over a wide range of values. There is an approximate three percentage point advantage by operating at a gas turbine inlet temperature of 870 C (1600 F) instead of 538 C (1000 F). Optimum pressure varies with the gas turbine inlet temperature, but ranges from 0.4–1.0 MPa (4–10 atm). An alternate PFBC cycle offering high efficiency at a peak temperature of about 650 C (1200 F) is also discussed.

Influence of Turbine Inlet Temperature on the Efficiency of Externally Fired Gas Turbines

2014 ◽  
pp. 79-95 ◽  
Author(s):  
Paulo Eduardo Batista de Mello ◽  
Sérgio Scuotto ◽  
Fernando dos Santos Ortega ◽  
Gustavo Henrique Bolognesi Donato
Keyword(s):  
Gas Turbines ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet

Proposal of Innovative Gas Turbine Combined Cycle Power Generation System

2004 ◽  
Author(s):  
Hideto Moritsuka
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Generation System ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Power Generation System

In order to estimate the possibility to improve thermal efficiency of power generation use gas turbine combined cycle power generation system, benefits of employing the advanced gas turbine technologies proposed here have been made clear based on the recently developed 1500C-class steam cooling gas turbine and 1300C-class reheat cycle gas turbine combined cycle power generation systems. In addition, methane reforming cooling method and NO reducing catalytic reheater are proposed. Based on these findings, the Maximized efficiency Optimized Reheat cycle Innovative Gas Turbine Combined cycle (MORITC) Power Generation System with the most effective combination of advanced technologies and the new devices have been proposed. In case of the proposed reheat cycle gas turbine with pressure ratio being 55, the high pressure turbine inlet temperature being 1700C, the low pressure turbine inlet temperature being 800C, combined with the ultra super critical pressure, double reheat type heat recovery Rankine cycle, the thermal efficiency of combined cycle are expected approximately 66.7% (LHV, generator end).

Off-design performance improvement of twin-shaft gas turbine by variable geometry turbine and compressor besides fuel control

2019 ◽  
Vol 234 (7) ◽  
pp. 957-980
Author(s):  
Sepehr Sanaye ◽  
Salahadin Hosseini
Keyword(s):  
Life Cycle ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Guide Vane ◽  
Design Parameters ◽  
Inlet Guide Vane ◽  
Inlet Temperature ◽  
Gas Generator ◽  
Turbine Inlet ◽  
Exit Temperature

A novel procedure for finding the optimum values of design parameters of industrial twin-shaft gas turbines at various ambient temperatures is presented here. This paper focuses on being off design due to various ambient temperatures. The gas turbine modeling is performed by applying compressor and turbine characteristic maps and using thermodynamic matching method. The gas turbine power output is selected as an objective function in optimization procedure with genetic algorithm. Design parameters are compressor inlet guide vane angle, turbine exit temperature, and power turbine inlet nozzle guide vane angle. The novel constrains in optimization are compressor surge margin and turbine blade life cycle. A trained neural network is used for life cycle estimation of high pressure (gas generator) turbine blades. Results for optimum values for nozzle guide vane/inlet guide vane (23°/27°–27°/6°) in ambient temperature range of 25–45 ℃ provided higher net power output (3–4.3%) and more secured compressor surge margin in comparison with that for gas turbines control by turbine exit temperature. Gas turbines thermal efficiency also increased from 0.09 to 0.34% (while the gas generator turbine first rotor blade creep life cycle was kept almost constant about 40,000 h). Meanwhile, the averaged values for turbine exit temperature/turbine inlet temperature changed from 831.2/1475 to 823/1471°K, respectively, which shows about 1% decrease in turbine exit temperature and 0.3% decrease in turbine inlet temperature.

scholarly journals Study on effective parameter of the triple-pressure reheat combined cycle performance

2013 ◽  
Vol 17 (2) ◽  
pp. 497-508 ◽  
Author(s):  
Thamir Ibrahim ◽  
M.M. Rahman
Keyword(s):  
Power Plant ◽  
Ambient Temperature ◽  
Compression Ratio ◽  
Combined Cycle ◽  
Total Power ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Overall Performance ◽  
Overall Efficiency

The thermodynamic analyses of the triple-pressure reheat combined cycle gas turbines with duct burner are presented and discussed in this paper. The overall performance of a combined cycle gas turbine power plant is influenced by the ambient temperature, compression ratio and turbine inlet temperature. These parameters affect the overall thermal efficiency, power output and the heat-rate. In this study a thermodynamic model was development on an existing actual combined cycle gas turbine (CCGT) (In this case study, an effort has been made to enhance the performance of the CCGT through a parametric study using a thermodynamic analysis. The effect of ambient temperature and operation parameter, including compression ratio and turbine inlet temperature, on the overall performance of CCGT are investigated. The code of the performance model for CCGT power plant was developed utilizing the THERMOFLEX software. The simulating results show that the total power output and overall efficiency of a CCGT decrease with increase the ambient temperature because increase the consumption power in the air compressor of a GT. The totals power of a CCGT decreases with increase the compression rate, while the overall efficiency of a CCGT increases with increase the compression ratio to 21, after that the overall efficiency will go down. Far there more the turbine inlet temperature increases the both total power and overall efficiency increase, so the turbine inlet temperature has a strong effect on the overall performance of CCGT power plant. Also the simulation model give a good result compared with MARAFIQ CCGT power plant. With these variables, the turbine inlet temperature causes the greatest overall performance variation.

Analyses and Optimization of a Propulsion Cycle for Unmixed High Bypass Turbofan

2008 ◽  
Author(s):  
Adel Ghenaiet
Keyword(s):  
Fuel Consumption ◽  
Pressure Ratio ◽  
Specific Fuel Consumption ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
High Pressure Ratio ◽  
Turbine Inlet ◽  
Design Variables ◽  
Bypass Ratio

This paper deals with a parametric study and an optimization for the design variables of a high bypass unmixed turbofan equipping commercial aircrafts. The objective of the first part of this study is to highlight the effects of the principal design parameters (bypass ratio, compression ratios, turbine inlet temperature etc..) on the uninstalled performance, in terms of specific thrust and specific fuel consumption. The second part concerns the optimization, aiming at finding the optimum design parameters concurrently minimizing the specific fuel consumption at cruise, and meeting the thrust requirement at takeoff. The cycle analyzer (on-design and off-design) as coupled to the optimization algorithm MMFD by adopting a random multi-starts search strategy is shown to be stable and converging. The predefined requirements and constraints have dictated utilizing an engine with a high-bypass ratio, high-pressure ratio and a moderate turbine inlet temperature. In general, the obtained results compare fairly well with typical data available for an equivalent ‘reference’ engine. This elaborated methodology is shown to be consistent with the conceptual design requirements and accuracy, because, it does not use components’ characteristics, and operates on simplifying assumptions. This present methodology can be readily adapted for other configurations of aero-engines as well, and easily integrated in a multi-disciplinary design approach.

Sign in / Sign up

Export Citation Format

Share Document