Characteristics of Transient Electroosmotic Flow in Microchannels With Complex-Wavy Surface and Periodic Time-Varying Electric Field

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Ching-Chang Cho ◽  
Chieh-Li Chen ◽  
Cha'o-Kuang Chen
Keyword(s):  
Electric Field ◽  
Strouhal Number ◽  
Electric Potential ◽  
Electroosmotic Flow ◽  
Flow Characteristics ◽  
Threshold Value ◽  
Oscillation Period ◽  
Wavy Surface ◽  
Time Varying ◽  
Flow Recirculation

A numerical investigation is performed into the flow characteristics of the electroosmotic flow induced within a microchannel with a complex-wavy surface by a time-varying periodic electric field. The simulations focus specifically on the effects of the Strouhal number of the periodic electric potential, the amplitude of the periodic electric potential, the amplitude of the complex-wavy surface, and the waveform geometry. The results show that under steady-time periodic conditions, the flow pattern induced within the microchannel varies over the course of the oscillation period. In particular, it is shown that a flow recirculation structure is generated in the trough region of the wavy surface as the applied electric field falls to zero if the amplitude of the wavy surface exceeds a certain threshold value. In addition, it is shown that the phases of the electric field and electroosmotic velocity near the wall surface are almost identical. However, a phase shift exists between the electric field and the bulk flow velocity in the central region of the channel; particularly at larger values of the Strouhal number. Finally, it is shown that the velocity profile near the wavy surface is more sensitive to changes in the waveform geometry than that in the center of the channel. Overall, the simulation results presented in the study provide a useful source of reference for the development of new microfluidic systems incorporating microchannels with complex-wavy surfaces.

scholarly journals A numerical investigation into electroosmotic flow in microchannels with complex wavy surfaces

2011 ◽  
Vol 15 (suppl. 1) ◽  
pp. 87-94 ◽  
Author(s):  
Her-Terng Yau ◽  
Cheng-Chi Wang ◽  
Ching-Chang Cho ◽  
Cha’o-Kuang Chen
Keyword(s):  
Cross Sections ◽  
Electroosmotic Flow ◽  
Flow Characteristics ◽  
Velocity Profiles ◽  
Governing Equations ◽  
Electrical Field ◽  
Flow Recirculation ◽  
Wavy Surfaces ◽  
Pressure Driven Flow ◽  
General Method

This study investigates the flow characteristics of electroosmotic flow in a microchannel with complex wavy surfaces. A general method of coordinate transformation is used to solve the governing equations describing the electroosmotic flow in the microchannel. Numerical simulations are performed to analyze the effects of wave amplitude on the electrical field, flow streamlines, and flow fields in the microchannel. The simulation results show that, compared to a traditional pressure-driven flow, flow recirculation is not developed in the electroosmotic flow in a microchannel with complex wavy surfaces. The simulations also show that the electrical field and velocity profiles change along the channel in the region of wavy surfaces. Non-flat velocity profiles are observed in different cross-sections of the channel in the region of wavy surfaces.

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

scholarly journals Trade-Off between Operating Time and Energy Consumption in Pulsed Electric Field Electrodialysis: A Comprehensive Simulation Study

Membranes ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 43
Author(s):  
Manuel César Martí-Calatayud ◽  
Mario Sancho-Cirer Poczatek ◽  
Valentín Pérez-Herranz
Keyword(s):  
Energy Consumption ◽  
Electric Field ◽  
Simulation Study ◽  
Specific Energy ◽  
Operating Time ◽  
Specific Energy Consumption ◽  
Threshold Value ◽  
Pulsed Electric Field ◽  
Pulse Frequency ◽  
Time And Energy

Electrodialysis (ED) has been recently introduced in a variety of processes where the recovery of valuable resources is needed; thus, enabling sustainable production routes for a circular economy. However, new applications of ED require optimized operating modes ensuring low energy consumptions. The application of pulsed electric field (PEF) electrodialysis has been demonstrated to be an effective option to modulate concentration polarization and reduce energy consumption in ED systems, but the savings in energy are usually attained by extending the operating time. In the present work, we conduct a comprehensive simulation study about the effects of PEF signal parameters on the time and energy consumption associated with ED processes. Ion transport of NaCl solutions through homogeneous cation-exchange membranes is simulated using a 1-D model solved by a finite-difference method. Increasing the pulse frequency up to a threshold value is effective in reducing the specific energy consumption, with threshold frequencies increasing with the applied current density. Varying the duty cycle causes opposed effects in the time and energy usage needed for a given ED operation. More interestingly, a new mode of PEF functions with the application of low values of current during the relaxation phases has been investigated. This novel PEF strategy has been demonstrated to simultaneously improve the time and the specific energy consumption of ED processes.

Synergistic use of electroosmotic flow and magnetic forces for nucleic acid extraction

The Analyst ◽  
2020 ◽  
Vol 145 (6) ◽  
pp. 2412-2419 ◽  
Author(s):  
Rachel N. Deraney ◽  
Lindsay Schneider ◽  
Anubhav Tripathi
Keyword(s):  
Nucleic Acid ◽  
Electric Field ◽  
Microfluidic Chip ◽  
Applied Electric Field ◽  
Electroosmotic Flow ◽  
Acid Extraction ◽  
Nucleic Acid Extraction ◽  
Magnetic Forces ◽  
Extraction And Purification

NA extraction and purification utilitzing a microfluidic chip with applied electric field to induce electroosmotic flow opposite the magnetic NA-bound bead mix.

scholarly journals Review of time-resolved non-contact electrostatic force microscopy techniques with applications to ionic transport measurements

2019 ◽  
Vol 10 ◽  
pp. 617-633 ◽  
Author(s):  
Aaron Mascaro ◽  
Yoichi Miyahara ◽  
Tyler Enright ◽  
Omur E Dagdeviren ◽  
Peter Grütter
Keyword(s):  
Atomic Force Microscopy ◽  
Electrostatic Force ◽  
Oscillation Period ◽  
Electrostatic Force Microscopy ◽  
Time Varying ◽  
Time Resolved ◽  
Battery Materials ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Techniques

Recently, there have been a number of variations of electrostatic force microscopy (EFM) that allow for the measurement of time-varying forces arising from phenomena such as ion transport in battery materials or charge separation in photovoltaic systems. These forces reveal information about dynamic processes happening over nanometer length scales due to the nanometer-sized probe tips used in atomic force microscopy. Here, we review in detail several time-resolved EFM techniques based on non-contact atomic force microscopy, elaborating on their specific limitations and challenges. We also introduce a new experimental technique that can resolve time-varying signals well below the oscillation period of the cantilever and compare and contrast it with those previously established.

Some simple theorems concerning crystal lattice sums of electric potential, electric field, and electric field gradient in crystals

1967 ◽  
Vol 20 (12) ◽  
pp. 2551 ◽  
Author(s):  
CK Coogan
Keyword(s):  
Electric Field ◽  
Field Gradient ◽  
Electric Potential ◽  
Higher Symmetry ◽  
Lattice Sums ◽  
Symmetry Properties ◽  
Lattice Sum ◽  
Direct Lattice ◽  
Electric Potential Field ◽  
Conver Gence

The conditions under which direct lattice sums of electric potential, field, and field gradient converge are discussed. The analogous conditions under which differences in these lattice sums, for two points in the crystal, converge are also outlined. These conditions are applied to direct lattice sum calculations in crystals in which the ideal lattice is distorted close to a defect of some kind. The conver- gence conditions are then applied to the case of determining the direct lattice sums in crystals in which higher symmetry properties can be invoked, which leads to a knowledge by inspection of the lattice sum at one point in the unit cell.

scholarly journals Electric potential differences across auroral generator interfaces

2013 ◽  
Vol 31 (2) ◽  
pp. 251-261 ◽  
Author(s):  
J. De Keyser ◽  
M. Echim
Keyword(s):  
Electric Field ◽  
High Altitude ◽  
Electric Fields ◽  
Electric Potential ◽  
Equilibrium Configuration ◽  
Potential Difference ◽  
Field Profile ◽  
Electric Potential Difference ◽  
Electric Field Profile

Abstract. Strong localized high-altitude auroral electric fields, such as those observed by Cluster, are often associated with magnetospheric interfaces. The type of high-altitude electric field profile (monopolar, bipolar, or more complicated) depends on the properties of the plasmas on either side of the interface, as well as on the total electric potential difference across the structure. The present paper explores the role of this cross-field electric potential difference in the situation where the interface is a tangential discontinuity. A self-consistent Vlasov description is used to determine the equilibrium configuration for different values of the transverse potential difference. A major observation is that there exist limits to the potential difference, beyond which no equilibrium configuration of the interface can be sustained. It is further demonstrated how the plasma densities and temperatures affect the type of electric field profile in the transition, with monopolar electric fields appearing primarily when the temperature contrast is large. These findings strongly support the observed association of monopolar fields with the plasma sheet boundary. The role of shear flow tangent to the interface is also examined.

Sign in / Sign up

Export Citation Format

Share Document