Multiresponse Optimization of Al Alloy-SiC Composite Machining Parameters for Minimum Tool Wear and Maximum Metal Removal Rate

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Rajesh Kumar Bhushan
Keyword(s):  
Tool Wear ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Al Alloy ◽  
Machining Parameters ◽  
Metal Removal Rate ◽  
Nose Radius ◽  
Multiresponse Optimization

Optimization in turning means determination of the optimal set of the machining parameters to satisfy the objectives within the operational constraints. These objectives may be the minimum tool wear, the maximum metal removal rate (MRR), or any weighted combination of both. The main machining parameters which are considered as variables of the optimization are the cutting speed, feed rate, depth of cut, and nose radius. The optimum set of these four input parameters is determined for a particular job-tool combination of 7075Al alloy-15 wt. % SiC (20–40 μm) composite and tungsten carbide tool during a single-pass turning which minimizes the tool wear and maximizes the metal removal rate. The regression models, developed for the minimum tool wear and the maximum MRR were used for finding the multiresponse optimization solutions. To obtain a trade-off between the tool wear and MRR the, a method for simultaneous optimization of the multiple responses based on an overall desirability function was used. The research deals with the optimization of multiple surface roughness parameters along with MRR in search of an optimal parametric combination (favorable process environment) capable of producing desired surface quality of the turned product in a relatively lesser time (enhancement in productivity). The multi-objective optimization resulted in a cutting speed of 210 m/min, a feed of 0.16 mm/rev, a depth of cut of 0.42 mm, and a nose radius of 0.40 mm. These machining conditions are expected to respond with the minimum tool wear and maximum the MRR, which correspond to a satisfactory overall desirability.

Quantification of tool chatter and metal removal rate using wavelet denoising and statistical approach

2018 ◽  
Vol 49 (2) ◽  
pp. 62-81 ◽  
Author(s):  
Shailendra Kumar ◽  
Bhagat Singh
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Metal Removal ◽  
Removal Rate ◽  
Statistical Significance ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Metal Removal Rate ◽  
Chatter Index ◽  
Tool Chatter

Tool chatter is an unavoidable phenomenon encountered in machining processes. Acquired raw chatter signals are contaminated with various types of ambient noises. Signal processing is an efficient technique to explore chatter as it eliminates unwanted background noise present in the raw signal. In this study, experimentally recorded raw chatter signals have been denoised using wavelet transform in order to eliminate the unwanted noise inclusions. Moreover, effect of machining parameters such as depth of cut ( d), feed rate ( f) and spindle speed ( N) on chatter severity and metal removal rate has been ascertained experimentally. Furthermore, in order to quantify the chatter severity, a new parameter called chatter index has been evaluated considering aforesaid denoised signals. A set of 15 experimental runs have been performed using Box–Behnken design of experiment. These experimental observations have been used to develop mathematical models for chatter index and metal removal rate considering response surface methodology. In order to check the statistical significance of control parameters, analysis of variance has been performed. Furthermore, more experiments are conducted and these results are compared with the theoretical ones in order to validate the developed response surface methodology model.

Modeling and analysis of process parameters on metal removal rate (MRR) in machining of aluminium titanium diboride (Al-TiB2) composite

2015 ◽  
Vol 11 (3) ◽  
pp. 372-385 ◽  
Author(s):  
M. P. Jenarthanan ◽  
A Ram Prakash ◽  
R Jeyapaul
Keyword(s):  
Mathematical Model ◽  
Response Surface ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Surface Model ◽  
Design Matrix ◽  
Machining Parameters ◽  
Metal Removal Rate ◽  
Content Type

Purpose – The purpose of this paper is to develop a mathematical model for optimizing the metal removal rate (MRR) through Response Surface Methodology (RSM). The developed model helps us to analyze the influence of individual input machining parameters (cutting speed, feed rate, weight percentage) on the responses in machining of Al-TiB2 composite. Design/methodology/approach – RSM is used to optimize the MRR by developing a mathematical model. Three factors, three-level box Behnken design matrix in RSM is employed to carry out the experimental investigation. The “Design Expert 8.0” software is used for regression and graphical analysis of the data are collected. The optimum values of the selected variables are obtained by solving the regression equation and by analyzing the response surface contour plots. Analysis of variance (ANOVA) is applied to check the validity of the model and for finding the significant parameters. Findings – The response surface model developed, helps to calculate the MRR at different input cutting parameters with the chosen range with more than 95 per cent confidence intervals. Originality/value – The effect of machining parameters on MRR during machining of Al-TiB2 composites using RSM has not been previously analyzed.

scholarly journals EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS, POWER CONSUMPTION, AND MATERIAL REMOVAL RATE OF ALUMINIUM 6065-SI-MWCNT METAL MATRIX COMPOSITE IN TURNING OPERATIONS

2021 ◽  
Vol 22 (2) ◽  
pp. 283-293
Author(s):  
Savina Jaddinagadhe Puttaswamy ◽  
Raghavendra Bommanahalli Venkatagiriyappa
Keyword(s):  
Surface Roughness ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Stir Casting ◽  
Influential Factor ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Lathe Machine ◽  
Tungsten Carbide Tool

Nanocomposites were prepared with Al-6065-Si and multi walled carbon nanotubes of 1 wt.% as reinforcement through the stir-casting method. Fabricated nanocomposites were machined on a lathe machine using a tungsten carbide tool. The study investigated the multi-objective optimization of the turning operation. Cutting velocity, feed, and depth of cut were considered for providing minimum Surface Roughness of the workpiece. Also, the power consumed by the lathe machine with maximum metal removal rate was examined by surface response methodology. The design of experiments was developed based on rotational central composite design. Analysis of variance was executed to investigate the adequacy and the suitable fit of the developed mathematical models. Multiple regression models were used to represent the relationship between the input and the desired output variables. The analysis indicates that the feed is the most influential factor that effects the surface roughness of the workpiece. Cutting speed and the depth of cut are two other important factors that proportionally influence the power consumed by the lathe tool as compared to the feed rate. ABSTRAK: Komposit nano disediakan bersama Al-6065-Si dan karbon nanotiub berbilang dinding sebanyak 1 wt.% sebagai bahan penguat melalui kaedah kacauan-tuangan. Komposit nano yang terhasil melalui mesin pelarik ini menggunakan alat tungsten karbida. Kajian ini merupakan pengoptimuman pelbagai objektif operasi pusingan. Kelajuan potongan, suapan dan kedalaman potongan diambil kira sebagai pemberian minimum pada kekasaran permukaan bahan kerja. Tenaga yang digunakan bagi mesin pelarik dengan kadar maksimum penyingkiran logam diteliti melalui kaedah tindak balas permukaan. Rekaan eksperimen yang dibangunkan ini adalah berdasarkan rekaan komposit pusingan tengah. Analisis varian telah dijalankan bagi mengkaji kecukupan dan penyesuaian lengkap bagi model matematik yang dibangunkan. Model regresi berganda digunakan bagi menunjukkan hubungan antara input dan pembolehubah output yang dikehendaki. Analisis menunjukkan pemberian suapan merupakan faktor mempengaruhi keberkesanan kekasaran permukaan bahan kerja. Kelajuan pemotongan dan kedalaman potongan adalah dua faktor penting lain yang mempengaruhi kadar langsung ke atas tenaga yang digunakan oleh mesin pelarik dibandingkan kadar pemberian suapan.

Ascertaining of chatter stability using wavelet denoising and artificial neural network

2018 ◽  
Vol 233 (1) ◽  
pp. 39-62 ◽  
Author(s):  
Shailendra Kumar ◽  
Bhagat Singh
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Metal Removal ◽  
Removal Rate ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Metal Removal Rate ◽  
Artificial Neural ◽  
Propagation Network ◽  
Tool Chatter

In modern machining industries, tool chatter detection and suppression along with maximized metal removal rate is a challenging task. Inexpedient vibration between cutting tool and work piece promotes unstable cutting. This results in enhanced detritions of tool and poor surface finish along with unpredictable metal removal rate. In the present work, effect of machining parameters such as depth of cut ( d), feed rate ( f) and spindle speed ( N) on chatter severity and metal removal rate have been ascertained experimentally. Experimentally recorded raw chatter signals have been denoised using wavelet transform. An artificial neural network model based on feed forward back propagation network has been proposed for predicting stable cutting zone and metal removal rate in turning process. It has been deduced that Tangent Sigmoid activation function in an artificial neural network is the best option to achieve the aforesaid objectives. Well correlation between the artificial neural network predicted results and experimental ones validate the developed technique of ascertaining the tool chatter severity.

Optimization of input machining parameters in SBCNC-60 for turning and drilling on P8 (H-13,HSS) material

2021 ◽  
Vol 58 (2) ◽  
pp. 640-663
Author(s):  
Arti Saxena ◽  
YM Dubey ◽  
Manish Kumar ◽  
Abneesh Saxena
Keyword(s):  
Taguchi Method ◽  
Metal Cutting ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Control Factor ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Cnc Machine ◽  
Input Control

Today’s technology of automobile manufacturing industries depends mainly on a metal cutting operation like turning and drilling. This paper aims to improve turning and drilling operations in industries where necessity is to increase productivity by improving the metal removal rate. This paper-work uses the Taguchi method to analyze the input control parameter and optimize the significant ones to obtain the desired output. Taguchi method is a broadly used technique for experimental design and analysis of experimental data to improve the performance of machining operations like face turning, drilling, etc. in a CNC machine by taking input control factor cutting speed (CS), feed rate (FR), depth of cut (DOC) and then find out the significant ones to optimize machining operation. In this paper, CNMG190616-M5-TM2501 and SD205A-1050–056-12R1-P cutting tool are used for turning and drilling operation respectively for H-13 (P8) material, and then by applying Taguchi L9 array and further analysis using ANOVA and validation test through regression model is done on input control parameters to obtain better optimum performance of SBCNC 60 lathe machine.

MULTI-OBJECTIVE OPTIMIZATION OF TURNING PARAMETERS USING THE COMBINED MOORA AND ENTROPY METHOD

2016 ◽  
Vol 40 (1) ◽  
pp. 101-111 ◽  
Author(s):  
B. Singaravel ◽  
T. Selvaraj ◽  
S. Vinodh
Keyword(s):  
Removal Rate ◽  
Cutting Speed ◽  
Entropy Method ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Multi Objective Optimization ◽  
Nose Radius ◽  
Multi Objective ◽  
Entropy Measurement ◽  
Coated Carbide

Selection of optimum machining parameters in machining operations leads to good functional attributes for the machined components and increased productivity. In this work, machining parameters and nose radius are optimized in turning of EN25 steel with coated carbide tool by the application of combined Multi-Objective Optimization by Ratio Analysis (MOORA) and entropy measurement method. The selected machining parameters are cutting speed, feed rate, depth of cut and nose radius for minimization of surface roughness, micro-hardness and maximization of Material Removal Rate (MRR). Entropy concept has been used to assign the weight criteria of each objective being considered. The optimum combination of machining parameters and nose radius are obtained using normalized assessment values. The results obtained in the analysis are validated and the results based on turning process responses can be effectively improved.

Optimization of Cutting Parameters in Milling Process Using Genetic Algorithm and ANOVA (March 2020)

2020 ◽  
Vol 38 (10A) ◽  
pp. 1489-1503
Author(s):  
Marwa Q. Ibraheem
Keyword(s):  
Genetic Algorithm ◽  
Tool Wear ◽  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Optimal Value ◽  
Optimization Of Cutting Parameters

In this present work use a genetic algorithm for the selection of cutting conditions in milling operation such as cutting speed, feed and depth of cut to investigate the optimal value and the effects of it on the material removal rate and tool wear. The material selected for this work was Ti-6Al-4V Alloy using H13A carbide as a cutting tool. Two objective functions have been adopted gives minimum tool wear and maximum material removal rate that is simultaneously optimized. Finally, it does conclude from the results that the optimal value of cutting speed is (1992.601m/min), depth of cut is (1.55mm) and feed is (148.203mm/rev) for the present work.

Optimization of MRR and Surface Roughness of AlMg3 (AA5754) Alloy in CNC Lathe Machine by Using Taguchi Method

2018 ◽  
Vol 877 ◽  
pp. 110-117 ◽  
Author(s):  
Poornesh Kumar Chaturvedi ◽  
Harendra Kumar Narang ◽  
Atul Kumar Sahu
Keyword(s):  
Surface Roughness ◽  
Taguchi Method ◽  
Metal Removal ◽  
Removal Rate ◽  
Surface Condition ◽  
Point Of View ◽  
Depth Of Cut ◽  
Metal Removal Rate ◽  
Cnc Lathe ◽  
Lathe Machine

Quality of the product is the major concern in manufacturing industries from customers as well as producers point of view. There are number of factors in the product such as surface condition, height, weight, length, width etc., which may be consider for the measurement of the quality. Surface roughness and Metal Removal Rate (MRR) are the two main outcomes on which numerous researchers have applied different approaches for several years to get optimum results. In this study, Taguchi Method is applied for getting optimum parameters settings for Surface roughness and Metal Removal Rate (MRR) in case of turning AlMg3 (AA5754) in CNC Lathe machine, which is an aluminum alloy having diameter 20 mm and length 100 mm. The three parameters i.e. spindle speed, feed rate and depth of cut with 3 levels are taken as the process variables and the working ranges of these parameters for conducting experiments are selected based on Taguchi’s L9 Orthogonal Array (OA) design. To analyze the significant process parameters; main effect plots for data means and for S/N ratio are generated using Minitab statistical software.

scholarly journals Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1338
Author(s):  
Lakshmanan Selvam ◽  
Pradeep Kumar Murugesan ◽  
Dhananchezian Mani ◽  
Yuvaraj Natarajan
Keyword(s):  
Tool Wear ◽  
Cutting Force ◽  
Physical Vapor Deposition ◽  
Metal Cutting ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Machined Surface ◽  
Coated Carbide ◽  
Cryogenic Conditions

Over the past decade, the focus of the metal cutting industry has been on the improvement of tool life for achieving higher productivity and better finish. Researchers are attempting to reduce tool failure in several ways such as modified coating characteristics of a cutting tool, conventional coolant, cryogenic coolant, and cryogenic treated insert. In this study, a single layer coating was made on cutting carbide inserts with newly determined thickness. Coating thickness, presence of coating materials, and coated insert hardness were observed. This investigation also dealt with the effect of machining parameters on the cutting force, surface finish, and tool wear when turning Ti-6Al-4V alloy without coating and Physical Vapor Deposition (PVD)-AlCrN coated carbide cutting inserts under cryogenic conditions. The experimental results showed that AlCrN-based coated tools with cryogenic conditions developed reduced tool wear and surface roughness on the machined surface, and cutting force reductions were observed when a comparison was made with the uncoated carbide insert. The best optimal parameters of a cutting speed (Vc) of 215 m/min, feed rate (f) of 0.102 mm/rev, and depth of cut (doc) of 0.5 mm are recommended for turning titanium alloy using the multi-response TOPSIS technique.

scholarly journals Prediction of Machining Characteristics of Hybrid Composites Using Response Surface Methodology Approach

2018 ◽  
Vol 7 (3.1) ◽  
pp. 162 ◽  
Author(s):  
Ramanan. G ◽  
Rajesh Prabha.N ◽  
Diju Samuel.G ◽  
Jai Aultrin. K. S ◽  
M Ramachandran
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Hybrid Composites ◽  
Removal Rate ◽  
Cutting Speed ◽  
Chemical Properties ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Optimal Parameters ◽  
Rsm Technique

This manuscript presents the influencing parameters of CNC turning conditions to get high removal rate and minimal response of surface roughness in turning of AA7075-TiC-MoS2 composite by response surface method. These composites are particularly suited for applications that require higher strength, dimensional stability and enhanced structural rigidity. Composite materials are engineered materials made from at least two or more constituent materials having different physical or chemical properties. In this work seventeen turning experiments were conducted using response surface methodology. The machining parameters cutting speed, feed rate, and depth of cut are varied with respect to different machining conditions for each run. The optimal parameters were predicted by RSM technique. Turning process is studied by response surface methodology design of experiment. The optimal parameters were predicted by RSM technique. The most influencing process parameter predicted from RSM techniques in cutting speed and depth of cut.   

Sign in / Sign up

Export Citation Format

Share Document