scholarly journals Prediction of Turbulent Flow Around a Square Cylinder With Rounded Corners

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
S. S. Dai ◽  
B. A. Younis ◽  
H. Y. Zhang
Keyword(s):  
Turbulent Flow ◽  
Vortex Shedding ◽  
Turbulence Closure ◽  
Navier Stokes ◽  
Square Cylinder ◽  
Mean Flow ◽  
Drag Forces ◽  
Turbulence Closures ◽  
High Reynolds ◽  
Lift And Drag

Predictions are reported of the two-dimensional turbulent flow around a square cylinder with rounded corners at high Reynolds numbers. The effects of rounded corners have proved difficult to predict with conventional turbulence closures, and hence, the adoption in this study of a two-equation closure that has been specifically adapted to account for the interactions between the organized mean-flow motions due to vortex shedding and the random motions due to turbulence. The computations were performed using openfoam and were validated against the data from flows past cylinders with sharp corners. For the case of rounded corners, only the modified turbulence closure succeeded in capturing the consequences of the delayed flow separation manifested mainly in the reduction of the magnitude of the lift and drag forces relative to the sharp-edged case. These and other results presented here argue in favor of the use of the computationally more efficient unsteady Reynolds-averaged Navier-Stokes approach to this important class of flows provided that the effects of vortex shedding are properly accounted for in the turbulence closure.

Numerical Modeling of Pulsatile Turbulent Flow in Stenotic Vessels

2003 ◽  
Vol 125 (4) ◽  
pp. 445-460 ◽  
Author(s):  
Sonu S. Varghese ◽  
Steven H. Frankel
Keyword(s):  
Reynolds Number ◽  
Turbulent Flow ◽  
Turbulence Model ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equation ◽  
Flow Through ◽  
The Mean ◽  
High Reynolds

Pulsatile turbulent flow in stenotic vessels has been numerically modeled using the Reynolds-averaged Navier-Stokes equation approach. The commercially available computational fluid dynamics code (CFD), FLUENT, has been used for these studies. Two different experiments were modeled involving pulsatile flow through axisymmetric stenoses. Four different turbulence models were employed to study their influence on the results. It was found that the low Reynolds number k-ω turbulence model was in much better agreement with previous experimental measurements than both the low and high Reynolds number versions of the RNG (renormalization-group theory) k-ε turbulence model and the standard k-ε model, with regard to predicting the mean flow distal to the stenosis including aspects of the vortex shedding process and the turbulent flow field. All models predicted a wall shear stress peak at the throat of the stenosis with minimum values observed distal to the stenosis where flow separation occurred.

Prediction of Vortex Shedding Control by Means of Splitter Plates

2017 ◽  
Author(s):  
Shaoshi Dai ◽  
Rongyu Zhang ◽  
Bassam A. Younis ◽  
Hongyang Zhang
Keyword(s):  
Vortex Shedding ◽  
Computational Study ◽  
Circular Cylinders ◽  
Maximum Reduction ◽  
Drag Forces ◽  
Splitter Plates ◽  
High Reynolds ◽  
Lift And Drag ◽  
Main Effects ◽  
Plate Width

The paper presents preliminary results of a computational study aimed at quantifying the effectiveness of splitter plates in reducing the strength of vortex shedding from circular cylinders at high Reynolds number. The principal interest is in determining the optimal ratio of splitter plate width to cylinder diameter to achieve maximum reduction in the magnitude of the fluctuating lift and drag forces relative to their original values. The computations were performed using the URANS approach. The effects of turbulence were accounted for using a turbulence closure that has been adapted to account for the effects of organized vortex shedding on the random turbulent motions. Comparisons with experimental data show that this approach is successful in capturing the main effects that arise from the attachment of splitter plates to the cylinder base.

Turbulent flow between counter-rotating concentric cylinders: a direct numerical simulation study

2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG
Keyword(s):  
Turbulent Flow ◽  
Large Scale ◽  
Outer Cylinder ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Taylor Vortex ◽  
Small Scale ◽  
Mean Flow ◽  
Concentric Cylinders ◽  
High Reynolds

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.

Parameter Extension Simulation of Turbulent Flows in a Compressor Cascade With a High Reynolds Number

2020 ◽  
Author(s):  
Yan Jin
Keyword(s):  
Reynolds Number ◽  
Turbulent Flow ◽  
Turbulent Flows ◽  
Stokes Equations ◽  
Simulation Method ◽  
Potential Method ◽  
Navier Stokes ◽  
Reference Solution ◽  
Compressor Cascade ◽  
High Reynolds

Abstract The turbulent flow in a compressor cascade is calculated by using a new simulation method, i.e., parameter extension simulation (PES). It is defined as the calculation of a turbulent flow with the help of a reference solution. A special large-eddy simulation (LES) method is developed to calculate the reference solution for PES. Then, the reference solution is extended to approximate the exact solution for the Navier-Stokes equations. The Richardson extrapolation is used to estimate the model error. The compressor cascade is made of NACA0065-009 airfoils. The Reynolds number 3.82 × 105 and the attack angles −2° to 7° are accounted for in the study. The effects of the end-walls, attack angle, and tripping bands on the flow are analyzed. The PES results are compared with the experimental data as well as the LES results using the Smagorinsky, k-equation and WALE subgrid models. The numerical results show that the PES requires a lower mesh resolution than the other LES methods. The details of the flow field including the laminar-turbulence transition can be directly captured from the PES results without introducing any additional model. These characteristics make the PES a potential method for simulating flows in turbomachinery with high Reynolds numbers.

Influence of wing kinematics on aerodynamic performance in hovering insect flight

2007 ◽  
Vol 594 ◽  
pp. 341-368 ◽  
Author(s):  
FRANK M. BOS ◽  
D. LENTINK ◽  
B. W. VAN OUDHEUSDEN ◽  
H. BIJL
Keyword(s):  
Insect Flight ◽  
Fruit Fly ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Insect Wing ◽  
Wing Kinematics ◽  
Drag Forces ◽  
Kinematic Models ◽  
Characteristic Features ◽  
Lift And Drag

The influence of different wing kinematic models on the aerodynamic performance of a hovering insect is investigated by means of two-dimensional time-dependent Navier–Stokes simulations. For this, simplified models are compared with averaged representations of the hovering fruit fly wing kinematics. With increasing complexity, a harmonic model, a Robofly model and two more-realistic fruit fly models are considered, all dynamically scaled at Re = 110. To facilitate the comparison, the parameters of the models were selected such that their mean quasi-steady lift coefficients were matched. Details of the vortex dynamics, as well as the resulting lift and drag forces, were studied.The simulation results reveal that the fruit fly wing kinematics result in forces that differ significantly from those resulting from the simplified wing kinematic models. In addition, light is shed on the effect of different characteristic features of the insect wing motion. The angle of attack variation used by fruit flies increases aerodynamic performance, whereas the deviation is probably used for levelling the forces over the cycle.

Prediction of drag and lift forces of a high-speed vessel at full scale by CFD-based GEOSIM method

2022 ◽  
pp. 147509022110707
Author(s):  
Ugur Can ◽  
Sakir Bal
Keyword(s):  
High Speed ◽  
Full Scale ◽  
Navier Stokes ◽  
Drag Forces ◽  
Fluid Body ◽  
Unsteady Rans ◽  
Lift Forces ◽  
Drag And Lift ◽  
Lift And Drag ◽  
Model Family

In this study, it was aimed to obtain an accurate extrapolation method to compute lift and drag forces of high-speed vessels at full-scale by using CFD (Computational Fluid Dynamics) based GEOSIM (GEOmetrically SIMilar) method which is valid for both fully planing and semi-planing regimes. Athena R/V 5365 bare hull form with a skeg which is a semi-displacement type of high-speed vessel was selected with a model family for hydrodynamic analyses under captive and free to sinkage/trim conditions. Total drag and lift forces have been computed for a generated GEOSIM family of this form at three different model scales and full-scale for Fr = 0.8 by an unsteady RANS (Reynolds Averaged Navier–Stokes) solver. k–ε turbulence model was used to simulate the turbulent flow around the hulls, and both DFBI (Dynamic Fluid Body Interaction) and overset mesh technique were carried out to model the heave and pitch motions under free to sinkage/trim condition. The computational results of the model family were used to get “drag-lift ratio curve” for Athena hull at a fixed Fr number and so the corresponding results at full scale were predicted by extrapolating those of model scales in the form of a non-dimensional ratios of drag-lift forces. Then the extrapolated full-scale results calculated by modified GEOSIM method were compared with those of full-scale CFD and obtained by Froude extrapolation technique. The modified GEOSIM method has been found to be successful to compute the main forces (lift and drag) acting on high-speed vessels as a single coefficient at full scale. The method also works accurately both under fully and semi-planing conditions.

scholarly journals Self-consistent triple decomposition of the turbulent flow over a backward-facing step under finite amplitude harmonic forcing

2019 ◽  
Vol 475 (2225) ◽  
pp. 20190018
Author(s):  
E. Yim ◽  
P. Meliga ◽  
F. Gallaire
Keyword(s):  
Turbulent Flow ◽  
Finite Amplitude ◽  
Navier Stokes ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Backward Facing Step ◽  
Eddy Viscosity Model ◽  
Coherent Interaction ◽  
Self Consistent ◽  
The Mean

We investigate the saturation of harmonically forced disturbances in the turbulent flow over a backward-facing step subjected to a finite amplitude forcing. The analysis relies on a triple decomposition of the unsteady flow into mean, coherent and incoherent components. The coherent–incoherent interaction is lumped into a Reynolds averaged Navier–Stokes (RANS) eddy viscosity model, and the mean–coherent interaction is analysed via a semi-linear resolvent analysis building on the laminar approach by Mantič-Lugo & Gallaire (2016 J. Fluid Mech. 793 , 777–797. ( doi:10.1017/jfm.2016.109 )). This provides a self-consistent modelling of the interaction between all three components, in the sense that the coherent perturbation structures selected by the resolvent analysis are those whose Reynolds stresses force the mean flow in such a way that the mean flow generates exactly the aforementioned perturbations, while also accounting for the effect of the incoherent scale. The model does not require any input from numerical or experimental data, and accurately predicts the saturation of the forced coherent disturbances, as established from comparison to time-averages of unsteady RANS simulation data.

Partially Averaged Navier–Stokes (PANS) Method for Turbulence Simulations: Flow Past a Circular Cylinder

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
Sunil Lakshmipathy ◽  
Sharath S. Girimaji
Keyword(s):  
Circular Cylinder ◽  
Navier Stokes ◽  
Length Scale ◽  
Detached Eddy Simulation ◽  
Mean Flow ◽  
Closure Model ◽  
Variable Resolution ◽  
Eddy Simulation ◽  
Flow Past ◽  
High Reynolds

The objective of this study is to evaluate the capability of the partially averaged Navier–Stokes (PANS) method in a moderately high Reynolds number (ReD 1.4×105) turbulent flow past a circular cylinder. PANS is a bridging closure model purported for use at any level of resolution ranging from Reynolds-averaged Navier–Stokes to direct numerical simulations. The closure model is sensitive to the length-scale cut-off via the ratios of unresolved-to-total kinetic energy (fk) and unresolved-to-total dissipation (fε). Several simulations are performed to study the effect of the cut-off length-scale on computed closure model results. The results from various resolutions are compared against experimental data, large eddy simulation, and detached eddy simulation solutions. The quantities examined include coefficient of drag (Cd), Strouhal number (St), and coefficient of pressure distribution (Cp) along with the mean flow statistics and flow structures. Based on the computed results for flow past circular cylinder presented in this paper and analytical attributes of the closure model, it is reasonable to conclude that the PANS bridging method is a theoretically sound and computationally viable variable resolution approach for practical flow computations.

Viscous oscillatory flow about a circular cylinder at small to moderate Strouhal number

1995 ◽  
Vol 303 ◽  
pp. 215-232 ◽  
Author(s):  
H. M. Badr ◽  
S. C. R. Dennis ◽  
S. Kocabiyik ◽  
P. Nguyen
Keyword(s):  
Circular Cylinder ◽  
Strouhal Number ◽  
Transient Flow ◽  
Stokes Equations ◽  
Inviscid Flow ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Method Of Solution ◽  
High Reynolds

The transient flow field caused by an infinitely long circular cylinder placed in an unbounded viscous fluid oscillating in a direction normal to the cylinder axis, which is at rest, is considered. The flow is assumed to be started suddenly from rest and to remain symmetrical about the direction of motion. The method of solution is based on an accurate procedure for integrating the unsteady Navier–Stokes equations numerically. The numerical method has been carried out for large values of time for both moderate and high Reynolds numbers. The effects of the Reynolds number and of the Strouhal number on the laminar symmetric wake evolution are studied and compared with previous numerical and experimental results. The time variation of the drag coefficients is also presented and compared with an inviscid flow solution for the same problem. The comparison between viscous and inviscid flow results shows a better agreement for higher values of Reynolds and a Strouhal numbers. The mean flow for large times is calculated and is found to be in good agreement with previous predictions based on boundary-layer theory.

Sign in / Sign up

Export Citation Format

Share Document