Impact of Binary Biofuel Blend on Lubricating Oil Degradation in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Technical Problem ◽  
Lubricating Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Endurance Test ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Blended Fuel ◽  
The Impact

This paper presents lubricating oil performance in a compression ignition (CI) engine fueled with a binary fuel blend of 70% aamla seed oil biodiesel and 30% eucalyptus oil (EU) on volume basis. This blended fuel was stable and congruent with engine-fuel system. Initially, the engine was operated with normal diesel fuel as per standard endurance test. The same endurance test was performed with the above binary biodiesel blended fuel in the engine under somewhat modified engine operational condition. The lubricating oil was examined at a specified interval to evaluate the impact of the fuel on lubricating oil properties. Quantification of various metal debris concentrations was carried out using inductive coupled plasma atomic emission spectroscopy. After experimentation, the lubricating oil samples were analyzed using analytical ferrography that showed lower wear debris concentrations from binary biodiesel blend than diesel fuel operated engine. The better lubricating property of binary biodiesel blended fuel resulted in lower wear and improved performance of engine parts. Relatively low wear and concentrations of all metal wear were found in the lubricating oil with binary biodiesel blended fuel engine revealed better performance of engine with this fuel blend. No technical problem was encountered during the long-term endurance tests with the binary biodiesel blended fuel under modified engine parameters.

Binary Biodiesel Blend Endurance Characteristics in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Biodiesel Fuel ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Engine Operation ◽  
Endurance Tests ◽  
Ci Engines

The results obtained on wear assessment from a compression ignition (CI) engine fueled with a blend of 70% amla seed biodiesel (AB) and 30% eucalyptus oil (EU) on volume basis (called AB70EU30). The results showed stable engine operation and good operability of the engine-fuel system with the binary biodiesel fuel blend. The feasibility of this blend over a long-term endurance tests was explored. The specific assessment examination included the fate of cylinder head, pump plunger, injector nozzle, and piston crown, which affects the engine performance and engine life. The experimental results revealed better tribological performance characteristics with the binary fuel blend as compared to contemporary diesel fuel. No specific problem was encountered during the long-term endurance tests with the binary fuel blend using the modified engine parameters. The results show that the binary fuel mixture offers good potential for use as diesel fuel in CI engines while maintaining good performance and endurance.

Wear Assessment in a Biodiesel Fueled Compression Ignition Engine

2003 ◽  
Vol 125 (3) ◽  
pp. 820-826 ◽  
Author(s):  
A. K. Agarwal ◽  
J. Bijwe ◽  
L. M. Das
Keyword(s):  
Coefficient Of Friction ◽  
Linseed Oil ◽  
Diesel Oil ◽  
Lubricating Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Metal Debris ◽  
Wear Rates ◽  
Biodiesel Blend

Biodiesel is prepared using linseed oil and methanol by the process of transesterification. Use of linseed oil methyl ester (LOME) in a compression ignition engine was found to develop a highly compatible engine-fuel system with low emission characteristics. Two similar engines were operated using optimum biodiesel blend and mineral diesel oil, respectively. These were subjected to long-term endurance tests. Lubricating oil samples drawn from both engines after a fixed interval were subjected to elemental analysis. Quantification of various metal debris concentrations was done by atomic absorption spectroscopy (AAS). Wear metals were found to be about 30% lower for a biodiesel-operated engine system. Lubricating oil samples were also subjected to ferrography indicating lower wear debris concentrations for a biodiesel-operated engine. The additional lubricating property of LOME present in the fuel resulted in lower wear and improved life of moving components in a biodiesel-fuelled engine. However, this needed experimental verification and quantification. A series of experiments were thus conducted to compare the lubricity of various concentrations of LOME in biodiesel blends. Long duration tests were conducted using reciprocating motion in an SRV optimol wear tester to evaluate the coefficient of friction, specific wear rates, etc. The extent of damage, coefficient of friction, and specific wear rates decreased with increase in the percentage of LOME in the biodiesel blend. Scanning electron microscopy was conducted on the surfaces exposed to wear. The disk and pin using 20% biodiesel blend as the lubricating oil showed lesser damage compared to the one subjected to diesel oil as the lubricating fluid, confirming additional lubricity of biodiesel.

scholarly journals Combustion characteristics of compression ignition engine fuelled with rapeseed oil–diesel fuel–n-butanol blends

2021 ◽  
Vol 76 ◽  
pp. 17
Author(s):  
Jakub Čedík ◽  
Martin Pexa ◽  
Bohuslav Peterka ◽  
Miroslav Müller ◽  
Michal Holubek ◽  
...  
Keyword(s):  
Vegetable Oils ◽  
Diesel Fuel ◽  
Rapeseed Oil ◽  
Direct Injection ◽  
Combustion Characteristics ◽  
Solid Particles ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Blends

Liquid biofuels for compression ignition engines are often based on vegetable oils. In order to be used in compression ignition engine the vegetable oils have to be processed because of their high viscosity or it is also possible to use vegetable oils in fuel blends. In order to decrease the viscosity of the fuel blends containing crude vegetable oil the alcohol-based fuel admixtures can be used. The paper describes the effect of rapeseed oil–diesel fuel–n-butanol blends on combustion characteristics and solid particles production of turbocharged compression ignition engine. The 10% and 20% concentrations of n-butanol in the fuel blend were measured and analysed. The engine Zetor 1204, located in tractor Zetor Forterra 8641 with the power of 60kW and direct injection was used for the measurement. The engine was loaded through power take off shaft of the tractor using mobile dynamometer MAHA ZW500. The measurement was carried out in stabilized conditions at 20%, 60% and 100% engine load. The engine speed was kept at 1950 rpm. Tested fuel blends showed lower production of solid particles than diesel fuel and lower peak cylinder pressure and with increasing concentration of n-butanol in the fuel blend the ignition delay was prolonged and premixed phase of combustion was increased.

Combustion and emission characteristics of n-butanol/diesel fuel blend in a turbo-charged compression ignition engine

Fuel ◽  
2013 ◽  
Vol 107 ◽  
pp. 409-418 ◽  
Author(s):  
Lennox Siwale ◽  
Lukács Kristóf ◽  
Torok Adam ◽  
Akos Bereczky ◽  
Makame Mbarawa ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend

Effects of injection strategy on performance and emissions metrics in a diesel/methane dual-fuel single-cylinder compression ignition engine

2019 ◽  
Vol 20 (10) ◽  
pp. 1059-1072 ◽  
Author(s):  
Metin Korkmaz ◽  
Dennis Ritter ◽  
Bernhard Jochim ◽  
Joachim Beeckmann ◽  
Dirk Abel ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Deep Understanding ◽  
Injection Pressure ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Single Cylinder ◽  
Cylinder Compression ◽  
The Impact

In order to counteract the drawbacks of conventional diesel combustion, which can lead to high indicated specific nitric oxide and indicated specific particulate matter emissions, a promising diesel-dual-fuel concept is investigated and evaluated. In this study, methane is used as supplement to liquid diesel fuel due to its benefits like high knock resistance and clean combustion. A deep understanding of the in-cylinder process is required for engine design and combustion controller development. To investigate the impact of different input parameters such as injection duration, injection timing, and substitution rate on varying output parameters like load, combustion phasing, and engine-out emissions, numerous investigations were conducted. Engine speed, global equivalence ratio, and injection pressure were held constant. The experiments were carried out in a modified single-cylinder compression ignition engine. The results reveal regimes with different dependencies between injection timing of diesel fuel and combustion phasing. This work demonstrates the potential of the diesel-dual-fuel concept by combining sophisticated combustion control with the favorable combustion mode. Without employing exhaust gas recirculation, TIER IMO 3 emissions limits are met while ensuring high thermal efficiency.

scholarly journals A study of hydrogen fuel impact on compression ignition engine performance

2018 ◽  
Vol 234 ◽  
pp. 03001 ◽  
Author(s):  
Evgeni Dimitrov ◽  
Boyko Gigov ◽  
Spas Pantchev ◽  
Philip Michaylov ◽  
Mihail Peychev
Keyword(s):  
Carbon Dioxide ◽  
Nitrogen Oxides ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Carbon Dioxide Concentration ◽  
Hydrogen Gas ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Exhaust Gases ◽  
The Impact

In this paper, a dual-fuel compression ignition engine test bench is presented. In hydrogen-diesel fuel co-combustion conditions, the engine parameters are determined – performance: effective torque, effective power and mean effective pressure; fuel economy: fuel consumption and specific fuel consumption; toxicity: carbon monoxide, carbon dioxide, nitrogen oxides, hydrocarbons, and smoke emissions (opacity). The impact of hydrogen-diesel fuel mass ratio on the performance, toxicity and economy of the engine is studied by obtaining a series of hydrogen-diesel fuel ratio variation characteristics at constant engine speed and load. Improvement of the economical parameters of the engine and reduction of carbon dioxide concentration in exhaust gases is detected under operation with hydrogen gas fuel. Significant reduction of the exhaust gases opacity is observed. It is not clear what the impact of the quantity of hydrogen, injected in the engine, on the concentration of nitrogen oxides in the exhaust gases is.

Wear Assessment in a Biodiesel Fuelled Compression Ignition Engine

2001 ◽  
Author(s):  
Avinash Kumar Agarwal ◽  
Jayashree Bijwe ◽  
L. M. Das
Keyword(s):  
Coefficient Of Friction ◽  
Linseed Oil ◽  
Diesel Oil ◽  
Lubricating Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Metal Debris ◽  
Wear Rates ◽  
Biodiesel Blend

Abstract Biodiesel is prepared using linseed oil and methanol by the process of transesterification. Use of linseed oil methyl ester (LOME) in compression ignition engine was found to develop a highly compatible engine-fuel system with low emission characteristics. Two similar engines were operated using optimum biodiesel blend and mineral diesel oil respectively. These were subjected to long-term endurance tests. Lubricating oil samples drawn from both engines after a fixed interval were subjected to elemental analysis. Quantification of various metal debris concentrations was done by atomic absorption spectroscopy (AAS). Wear metals were found to be about 30% lower for biodiesel-operated engine system. Lubricating oil samples were also subjected to ferrography indicating lower wear debris concentrations for biodiesel-operated engine. The additional lubricating property of LOME present in the fuel resulted in lower wear and improved life of moving components in biodiesel-fuelled engine. However, this needed experimental verification and quantification. A series of experiments were thus conducted to compare the lubricity of various concentrations of LOME in biodiesel blends. Long duration tests were conducted using reciprocating motion in SRV optimol wear tester to evaluate the coefficient of friction, specific wear rates, etc. The extent of damage, coefficient of friction, and specific wear rates decreased with increase in the percentage of LOME in the biodiesel blend. Scanning Electron microscopy was conducted on the surfaces exposed to wear. The disc and pin using 20% biodiesel blend as lubricating oil showed lesser damage compared to the one subjected to diesel oil as lubricating fluid, confirming additional lubricity of biodiesel.

scholarly journals Performance Characteristics of n-Butanol-Diesel Fuel Blend Fired in a Turbo-Charged Compression Ignition Engine

2013 ◽  
Vol 01 (05) ◽  
pp. 77-83 ◽  
Author(s):  
Lennox Siwale ◽  
Lukács Kristóf ◽  
Torok Adam ◽  
Akos Bereczky ◽  
Antal Penninger ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Performance Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend
Sign in / Sign up

Export Citation Format

Share Document