Surface Current Improvement of Magnesium-Doped Hexagonal Boron Nitride Monolayer by Additional Nitrogen Gas Flow

2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Yuejin Wang ◽  
Guozhen Liu ◽  
Shiqiang Lu ◽  
Bin Guo ◽  
Hongye Zhang ◽  
...  

Abstract Hexagonal boron nitride (h-BN) is the most well-known wide band gap two-dimensional (2D) material (> 6 eV). To achieve its applications in optoelectronic devices, the conductance of h-BN must be implemented to the extent that it can be fabricated into a p–n junction. Here, we demonstrate a method to improve the surface current of p-type h-BN monolayer by introducing additional nitrogen gas flow during growth. First-principles calculations were conducted to show that nitrogen atmosphere can promote the formation of boron vacancy, making a low barrier site for Mg doping incorporation. Magnesium-doped h-BN monolayer was achieved using a low pressure chemical vapor deposition method under N2 flux. The surface current has been enhanced by three times up to 16 μA under 4 V external voltage. This approach provides potential applications of controllable conductive h-BN film for two-dimensional optoelectronic devices.

Nanoscale ◽  
2019 ◽  
Vol 11 (28) ◽  
pp. 13366-13376 ◽  
Author(s):  
Zhong-Qiang Liu ◽  
Jichen Dong ◽  
Feng Ding

In the initial stages of chemical vapor deposition on a Cu(111) surface, one-dimensional Bn–1Nn (N-rich environment) or BnNn–1 (B-rich) chains first appear, and they transform to two-dimensional sp2 networks or h-BN islands at a critical size of 13.


2017 ◽  
Vol 1 (9) ◽  
pp. 1836-1840 ◽  
Author(s):  
Lifeng Wang ◽  
Bin Wu ◽  
Hongtao Liu ◽  
Li Huang ◽  
Yongtao Li ◽  
...  

A water-assisted chemical vapor deposition method is developed for the fast growth of large-sized h-BN single crystal domains.


2015 ◽  
Vol 661 ◽  
pp. 142-148 ◽  
Author(s):  
Yong Jin ◽  
Shigeo Yasuhara ◽  
Tetsuhide Shimizu ◽  
Ming Yang

Boron nitride films were deposited on silicon substrate by a hot filament assisted chemical vapor deposition (HFCVD) system. The tris (dimethylamino) borane (B[N(CH3)2]3) was used as the single source precursor which has both the boron and nitrogen source, ammonia gas was used as the assisted gas to increase the nitrogen concentration in the films. The films deposited by different ratios of precursor to ammonia gas flow rate and filament temperatures were investigated. The boron-carbon-nitrogen (BCN) compound films were deposited under lower filament temperature. With increasing the ammonia gas flow rate, the carbon concentration in the films decreased. Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) image reveal that hexagonal boron nitride (hBN) films were deposited at the higher filament temperature of 2000°C. Moreover, the crystallization degree of the films became better with the filament temperature increased.


2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Xibiao Ren ◽  
Jichen Dong ◽  
Peng Yang ◽  
Jidong Li ◽  
Guangyuan Lu ◽  
...  

Nano Research ◽  
2014 ◽  
Vol 8 (4) ◽  
pp. 1357-1364 ◽  
Author(s):  
André Dankert ◽  
M. Venkata Kamalakar ◽  
Abdul Wajid ◽  
R. S. Patel ◽  
Saroj P. Dash

2D Materials ◽  
2017 ◽  
Vol 4 (2) ◽  
pp. 025117 ◽  
Author(s):  
Ariel Ismach ◽  
Harry Chou ◽  
Patrick Mende ◽  
Andrei Dolocan ◽  
Rafik Addou ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document