Mechanism of Wall Turbulence Modulation With Premixed Hydrogen Combustion

2019 ◽  
Author(s):  
Takashi Ohta ◽  
Yuta Onishi ◽  
Yasuyuki Sakai
Keyword(s):  
Numerical Simulation ◽  
Thermal Expansion ◽  
Reaction Mechanism ◽  
Wall Turbulence ◽  
Streamwise Vortices ◽  
Turbulence Modulation ◽  
Turbulence Structures ◽  
Chemical Reaction Mechanism ◽  
Vorticity Transport ◽  
Detailed Chemical

Abstract In order to clarify the mechanism of modulation of turbulence structures such as quasi-streamwise vortices affected by a flame propagating toward a wall, we perform a direct numerical simulation of wall turbulence with premixed hydrogen-air combustion using a detailed chemical reaction mechanism. As a result, existing quasi-streamwise vortices in turbulence near the wall are found to be suppressed, disappearing as the flame approaches. Hence, the turbulent flow tends to become laminar. Moreover, according to the analysis of the vorticity transport equation, it is found that the suppression is due to thermal expansion of the flame rather than an increase in viscosity. From the viewpoint of chemical reactions, it is revealed that thermal expansion inside turbulence vortices is mainly caused by reactions involving H2 and H2O2.

Regeneration mechanisms of near-wall turbulence structures

1995 ◽  
Vol 287 ◽  
pp. 317-348 ◽  
Author(s):  
James M. Hamilton ◽  
John Kim ◽  
Fabian Waleffe
Keyword(s):  
Turbulent Flows ◽  
Wall Turbulence ◽  
Direct Result ◽  
Wall Region ◽  
Computational Domain ◽  
Streamwise Vortices ◽  
Turbulence Structures ◽  
Wall Structures ◽  
Fully Developed Turbulent Flow ◽  
Near Wall

Direct numerical simulations of a highly constrained plane Couette flow are employed to study the dynamics of the structures found in the near-wall region of turbulent flows. Starting from a fully developed turbulent flow, the dimensions of the computational domain are reduced to near the minimum values which will sustain turbulence. A remarkably well-defined, quasi-cyclic and spatially organized process of regeneration of near-wall structures is observed. This process is composed of three distinct phases: formation of streaks by streamwise vortices, breakdown of the streaks, and regeneration of the streamwise vortices. Each phase sets the stage for the next, and these processes are analysed in detail. The most novel results concern vortex regeneration, which is found to be a direct result of the breakdown of streaks that were originally formed by the vortices, and particular emphasis is placed on this process. The spanwise width of the computational domain corresponds closely to the typically observed spanwise spacing of near-wall streaks. When the width of the domain is further reduced, turbulence is no longer sustained. It is suggested that the observed spacing arises because the time scales of streak formation, breakdown and vortex regeneration become mismatched when the streak spacing is too small, and the regeneration cycle at that scale is broken.

Direct numerical simulation of turbulent duct flow with inclined or V-shaped ribs mounted on one wall

2021 ◽  
Vol 932 ◽  
Author(s):  
S.V. Mahmoodi-Jezeh ◽  
Bing-Chen Wang
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Secondary Flows ◽  
Wall Turbulence ◽  
Spanwise Direction ◽  
Duct Flow ◽  
Mean Flow ◽  
Square Duct ◽  
Turbulence Structures ◽  
The Mean

In this research, highly disturbed turbulent flow of distinct three-dimensional characteristics in a square duct with inclined or V-shaped ribs mounted on one wall is investigated using direct numerical simulation. The turbulence field is highly sensitive to not only the rib geometry but also the boundary layers developed over the side and top walls. In a cross-stream plane secondary flows appear as large longitudinal vortices in both inclined and V-shaped rib cases due to the confinement of four sidewalls of the square duct. However, owing to the difference in the pattern of cross-stream secondary flow motions, the flow physics is significantly different in these two ribbed duct cases. It is observed that the mean flow structures in the cross-stream directions are asymmetrical in the inclined rib case but symmetrical in the V-shaped rib case, causing substantial differences in the momentum transfer across the spanwise direction. The impacts of rib geometry on near-wall turbulence structures are investigated using vortex identifiers, joint probability density functions between the streamwise and vertical velocity fluctuations, statistical moments of different orders, spatial two-point autocorrelations and velocity spectra. It is found that near the leeward and windward rib faces, the mean inclination angle of turbulence structures in the V-shaped rib case is greater than that of the inclined rib case, which subsequently enhances momentum transport between the ribbed bottom wall and the smooth top wall.

Sign in / Sign up

Export Citation Format

Share Document