On Non-Linear and Non-Ideal Interactions in Two Vibrating Problems

2007 ◽  
Author(s):  
J. L. Pala´cios Felix ◽  
J. M. Balthazar ◽  
R. M. L. R. F. Brasil ◽  
T. S. Krasnopolskaya ◽  
A. Y. Shevets
Keyword(s):  
Degrees Of Freedom ◽  
A Priori ◽  
Resonance Energy ◽  
Dc Motor ◽  
Vibrating System ◽  
Forcing Function ◽  
Transverse Vibrations ◽  
At Resonance ◽  
Large Amplitude Motions ◽  
Limited Power

In practical situations, the dynamics of the forcing function on a vibrating system cannot be considered as given a priori, and it must be taken as a consequence of the dynamics of the whole system. In other words, the forcing source has limited power, as that provided by a DC motor for an example, and thus its own dynamics is influenced by that of the vibrating system being forced. This increases the number of degrees of freedom of the problem, and it is called a non-ideal problem. In this work, we considerer two non-ideal problems analyzed by using numerical simulations. The existence of the Sommerfeld effect was verified, that is, the effect of getting stuck at resonance (energy imparted to the DC motor being used to excite large amplitude motions of the supporting structure). We considered two kinds of non-ideal problem: one related to the transverse vibrations of a shaft carrying two disks and another to a piezoceramic bar transducer powered by a vacuum tube generated by a non-ideal source.

Nonlinear Interactions in a Piezoceramic Bar Transducer Powered by a Vacuum Tube Generated by a Nonideal Source

2008 ◽  
Vol 4 (1) ◽  
Author(s):  
J. M. Balthazar ◽  
J. L. Palacios Felix ◽  
R. M. L. R. F. Brasil ◽  
T. S. Krasnopolskaya ◽  
A. Yu. Shvets
Keyword(s):  
Power Supply ◽  
Degrees Of Freedom ◽  
A Priori ◽  
Nonlinear Interactions ◽  
Sommerfeld Effect ◽  
Governing Equations ◽  
Vibrating System ◽  
Forcing Function ◽  
Limited Power ◽  
Piezoceramic Transducer

Interactions between the oscillations of piezoceramic transducer and the mechanism of its excitation—the generator of the electric current of limited power-supply—are analyzed in this paper. In practical situations, the dynamics of the forcing function on a vibrating system cannot be considered as given a priori, and it must be taken as a consequence of the dynamics of the whole system. In other words, the forcing source has limited power, as that provided by a dc motor for an example, and thus its own dynamics is influenced by that of the vibrating system being forced. This increases the number of degrees of freedom of the problem, and it is called a nonideal problem. In this work, we present certain phenomena as Sommerfeld effect, jump, saturation, and stability, through the influences of the parameters of the governing equations motion.

An Overview on a Nonideal System With Three and a Half Degrees of Freedom

2005 ◽  
Author(s):  
Karen de Lolo Guilherme ◽  
Jose´ Manoel Balthazar ◽  
Paulo Roberto Gardel Kurka ◽  
Masayoshi Tsuchida
Keyword(s):  
Degrees Of Freedom ◽  
Averaging Method ◽  
Dynamical Behavior ◽  
Mathematical Formulation ◽  
Rotation Frequency ◽  
Steady State Solution ◽  
Dc Motor ◽  
Physical Parameters ◽  
Phase Coordinates ◽  
Limited Power

The present paper studies a system comprised of two blocks connected by springs and dampers, and a DC motor with limited power supply fixed on a block, characterizing a non-ideal problem. This DC motor exciting the system causes interactions between the motor and the structure supporting it. Because of that, the non-ideal mathematical formulation of the problem has one and a half extra degree of freedom than the ideal one. A suitable choice of physical parameters leads to internal resonance conditions, that is, its natural frequencies are multiple of each other, by a known integer quantity. The purpose here is to study the dynamic behavior of the system using an analytical method based on perturbation techniques. The literature shows that the averaging method is the more flexible method concerning non-ideal problems. Summarizing, an steady state solution in amplitude and phase coordinates was obtained with averaging method showing the dependence of the structure amplitudes with the rotation frequency of the motor. Moreover, this solution shows that on of the amplitude coordinates has influence in the determination of the stationary rotation frequency. The analytical solution obtained shows the presence of the rotation frequency in expressions representing the oscillations of the structure, and the presence of amplitude coordinates in expressions describing the dynamic motion of the DC motor. These characteristics show the influence not only of the motor on structure but also of the response of the structure on dynamical behavior of the motor.

On nonlinear dynamics behavior and control of a new model of a magnetically levitated vibrating system, excited by an unbalanced DC motor of limited power supply

2014 ◽  
Vol 37 (4) ◽  
pp. 1139-1150 ◽  
Author(s):  
Hassan Costa Arbex ◽  
José Manoel Balthazar ◽  
Bento Rodrigues de Pontes Junior ◽  
Reyolando Manoel Lopes Rebello da Fonseca Brasil ◽  
Jorge Luis Palacios Felix ◽  
...  
Keyword(s):  
Nonlinear Dynamics ◽  
Power Supply ◽  
Dc Motor ◽  
New Model ◽  
Vibrating System ◽  
Limited Power ◽  
Limited Power Supply ◽  
Magnetically Levitated ◽  
And Control

The Influence of Loading Position in A Priori High Stress Detection using Mode Superposition

2020 ◽  
Vol 1 (1) ◽  
pp. 93-102
Author(s):  
Carsten Strzalka ◽  
◽  
Manfred Zehn ◽  
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
A Priori ◽  
High Stress ◽  
Von Mises Stress ◽  
Detailed Knowledge ◽  
Variable Loading ◽  
Numerical Effort ◽  
Von Mises

For the analysis of structural components, the finite element method (FEM) has become the most widely applied tool for numerical stress- and subsequent durability analyses. In industrial application advanced FE-models result in high numbers of degrees of freedom, making dynamic analyses time-consuming and expensive. As detailed finite element models are necessary for accurate stress results, the resulting data and connected numerical effort from dynamic stress analysis can be high. For the reduction of that effort, sophisticated methods have been developed to limit numerical calculations and processing of data to only small fractions of the global model. Therefore, detailed knowledge of the position of a component’s highly stressed areas is of great advantage for any present or subsequent analysis steps. In this paper an efficient method for the a priori detection of highly stressed areas of force-excited components is presented, based on modal stress superposition. As the component’s dynamic response and corresponding stress is always a function of its excitation, special attention is paid to the influence of the loading position. Based on the frequency domain solution of the modally decoupled equations of motion, a coefficient for a priori weighted superposition of modal von Mises stress fields is developed and validated on a simply supported cantilever beam structure with variable loading positions. The proposed approach is then applied to a simplified industrial model of a twist beam rear axle.

scholarly journals A Traveler’s Guide to the Multiverse: Promises, Pitfalls, and a Framework for the Evaluation of Analytic Decisions

2021 ◽  
Vol 4 (1) ◽  
pp. 251524592095492
Author(s):  
Marco Del Giudice ◽  
Steven W. Gangestad
Keyword(s):  
Degrees Of Freedom ◽  
A Priori ◽  
Simulated Data ◽  
Style Analysis ◽  
Data Set ◽  
Scant Attention ◽  
Equivalence Type ◽  
The Impact ◽  
Biased Estimates

Decisions made by researchers while analyzing data (e.g., how to measure variables, how to handle outliers) are sometimes arbitrary, without an objective justification for choosing one alternative over another. Multiverse-style methods (e.g., specification curve, vibration of effects) estimate an effect across an entire set of possible specifications to expose the impact of hidden degrees of freedom and/or obtain robust, less biased estimates of the effect of interest. However, if specifications are not truly arbitrary, multiverse-style analyses can produce misleading results, potentially hiding meaningful effects within a mass of poorly justified alternatives. So far, a key question has received scant attention: How does one decide whether alternatives are arbitrary? We offer a framework and conceptual tools for doing so. We discuss three kinds of a priori nonequivalence among alternatives—measurement nonequivalence, effect nonequivalence, and power/precision nonequivalence. The criteria we review lead to three decision scenarios: Type E decisions (principled equivalence), Type N decisions (principled nonequivalence), and Type U decisions (uncertainty). In uncertain scenarios, multiverse-style analysis should be conducted in a deliberately exploratory fashion. The framework is discussed with reference to published examples and illustrated with the help of a simulated data set. Our framework will help researchers reap the benefits of multiverse-style methods while avoiding their pitfalls.

scholarly journals Adaptive modelling of variably saturated seepage problems

2021 ◽  
Author(s):  
B Ashby ◽  
C Bortolozo ◽  
A Lukyanov ◽  
T Pryer
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Degrees Of Freedom ◽  
A Priori ◽  
Water Flux ◽  
Posteriori Error ◽  
Adaptive Finite Element Method ◽  
Posteriori Error Estimate ◽  
Adaptive Finite Element ◽  
Element Method

Summary In this article, we present a goal-oriented adaptive finite element method for a class of subsurface flow problems in porous media, which exhibit seepage faces. We focus on a representative case of the steady state flows governed by a nonlinear Darcy–Buckingham law with physical constraints on subsurface-atmosphere boundaries. This leads to the formulation of the problem as a variational inequality. The solutions to this problem are investigated using an adaptive finite element method based on a dual-weighted a posteriori error estimate, derived with the aim of reducing error in a specific target quantity. The quantity of interest is chosen as volumetric water flux across the seepage face, and therefore depends on an a priori unknown free boundary. We apply our method to challenging numerical examples as well as specific case studies, from which this research originates, illustrating the major difficulties that arise in practical situations. We summarise extensive numerical results that clearly demonstrate the designed method produces rapid error reduction measured against the number of degrees of freedom.

Dynamics of a DC Motor-Driving Arm with a Circular Periodic Potential and DC/AC Voltage Input

2021 ◽  
Vol 31 (12) ◽  
pp. 2150178
Author(s):  
R. F. Kouam Tagne ◽  
R. Tsapla Fotsa ◽  
P. Woafo
Keyword(s):  
Equilibrium Position ◽  
Periodic Potential ◽  
Permanent Magnets ◽  
Critical Value ◽  
Dc Motor ◽  
Chaotic Regime ◽  
Dc Voltage ◽  
Large Amplitude Motions ◽  
Sinusoidal Oscillations ◽  
Angular Oscillations

In this paper, we investigate the dynamics of an electromechanical system consisting of a DC motor-driving arm within a circular periodic potential created by three permanent magnets. Two configurations of the circular potential appear when one varies the positions of the magnets and the length of the DC motor, respectively. Two different forms of input signal are used: DC and AC voltage sources. For each case, conditions under which the mechanical arm can perform a complete rotation are obtained. Under the DC voltage excitation, the arm oscillates and then is stabilized at an equilibrium position for a DC voltage lower than a critical value [Formula: see text]. When the DC voltage is higher than the critical value [Formula: see text], the arm performs large amplitude motions (complete rotation). Submitted to an AC voltage with amplitude lower than a critical value, the mechanical arm exhibits sinusoidal oscillations around the equilibrium position [Formula: see text] with amplitudes less than one turn. Angular oscillations with amplitudes greater than one turn are observed when the voltage amplitude is higher than the critical value. Bifurcation diagrams show that the simple system can enter chaotic regime with the amplitudes of angular oscillations varying erratically from small to high values.

scholarly journals IASI-METOP and MIPAS-ENVISAT data fusion

2010 ◽  
Vol 10 (1) ◽  
pp. 183-211 ◽  
Author(s):  
S. Ceccherini ◽  
U. Cortesi ◽  
S. Del Bianco ◽  
P. Raspollini ◽  
B. Carli
Keyword(s):  
Data Fusion ◽  
Degrees Of Freedom ◽  
Solution Method ◽  
Information Gain ◽  
A Priori ◽  
A Priori Information ◽  
Priori Information ◽  
Single Instrument ◽  
Fusion Products ◽  
Temporal Coverage

Abstract. The combination of data obtained with different sensors (data fusion) is a powerful technique that can provide target products of the best quality in terms of precision and accuracy, as well as spatial and temporal coverage and resolution. In this paper the results are presented of the data fusion of measurements of ozone vertical profile performed by two space-borne interferometers (IASI on METOP and MIPAS on ENVISAT) using the new measurement-space-solution method. With this method both the loss of information due to interpolation and the propagation of possible biases (caused by a priori information) are avoided. The data fusion products are characterized by means of retrieval errors, information gain, averaging kernels and number of degrees of freedom. The analysis is performed both on simulated and real measurements and the results demonstrate and quantify the improvement of data fusion products with respect to measurements of a single instrument.

Generalized Modes in Time-Domain Seakeeping Calculations

2012 ◽  
Vol 56 (04) ◽  
pp. 215-233
Author(s):  
Johan T. Tuitman ◽  
Šime Malenica ◽  
Riaan van't Veer
Keyword(s):  
Rigid Body ◽  
Transient Response ◽  
Time Domain ◽  
Large Amplitude ◽  
Degrees Of Freedom ◽  
Mode Shapes ◽  
Nonlinear Load ◽  
Large Amplitude Motions ◽  
Rigid Body Modes ◽  
The Time Domain

The concept of "generalized modes" is to describe all degrees of freedom by mode shapes and not using any predefined shape, like rigid body modes. Generalized modes in seakeeping computations allow one to calculate the response of a single ship, springing, whipping, multibody interaction, etc., using a uniform approach. The generalized modes have already been used for frequency-domain seakeeping calculations by various authors. This article extents the generalized modes methodology to be used for time-domain seakeeping computations, which accounts for large-amplitude motions of the rigid-body modes. The time domain can be desirable for seakeeping computations because it is easy to include nonlinear load components and to compute transient response, like slamming and whipping. Results of multibody interaction, two barges connected by a hinge, whipping response of a ferry resulting from slamming loads, and the response of a flexible barge are presented to illustrate the theory.

Sign in / Sign up

Export Citation Format

Share Document