Economic and Environmental Impacts of Energy Efficiency Investment on Local Manufacturers

Author(s):  
Jun-Ki Choi ◽  
Kevin Hallinan ◽  
Kelly Kissock ◽  
Robert Brecha

The main goal of this study is to estimate the community-wide economic and environmental impacts of energy efficiency investment on the local manufacturing using data with different granularity. A systematic framework is developed by using multiple scale/layer of data. Result shows that a $14M investment in HVAC upgrade to reduce energy and cost in the economy of the Montgomery County, Ohio can result in a total local economic impact of $22M, stemming from the $14.5M coming from direct impact, $2.8M coming from indirect impact, and $4.7M coming from induced impacts. Job creation over the investment period yields a total of 106 jobs. Analysis provides insight into the most important types of economic effects to the local industries. From an environmental perspective, short term economy-wide carbon dioxide emissions increase because of the increased community-wide economic activities spurred by the production from local manufacturers and installation of energy efficiency measures, however the resulting energy savings provide continuous carbon dioxide reduction for various target savings.

Author(s):  
Anthony Sclafani

In January 2008 the Governor of Hawaii announced the Hawaii Clean Energy Initiative; an initiative that aims to have at least 70 percent of Hawaii’s power come from clean energy by 2030 [4]. In July 2009, the Hawaii Department of Accounting and General Services awarded NORESCO, an energy service company, a $33.9M contract to improve the energy efficiency of 10 government buildings. The avoided utility cost of the energy and water savings from the improvements is the project funding mechanism. The energy savings realized by the project will reduce carbon dioxide emissions associated with utility power generation. However, as renewable energy becomes a larger portion of the utility generation profile through the Hawaii Clean Energy Initiative, the carbon dioxide emissions reductions from specific energy efficiency measures may erode over time. This work presents a method of analysis to quantify the carbon dioxide emissions reduction over the life of a project generated by energy efficiency upgrades that accounts for both the impact of policy initiatives and climate change using DOE-2/eQUEST. The analysis is based on the fact that HVAC energy usage will vary with climate changes and that carbon dioxide emission reductions will vary with both energy savings and the corresponding utility’s power generation portfolio. The energy savings related to HVAC system energy efficiency improvements are calculated over the life of a 20 year performance contract using a calibrated DOE-2/eQUEST model of an existing building that utilizes weather data adjusted to match the predictions of the Intergovernmental Panel on Climate Change. The carbon dioxide emissions reductions are calculated using the energy savings results and a projection of the implementation of the Hawaii Clean Energy Initiative. The emissions reductions are compared with other analysis methods and discussed to establish more refined expectations of the impact of energy efficiency projects in context with climate changes and policy initiatives.


Author(s):  
Courtney E. Grosvenor ◽  
Melissa C. Lott ◽  
Michael E. Webber

The impacts of the U.S. transportation and electricity generation sectors include air emissions and water consumption. Information and communication technologies (ICT) such as advanced video teleconferencing have the potential to displace some activities that have historically required transportation. While ICT can reduce environmental impacts compared to transportation options in many cases, there are non-obvious environmental trade-offs associated with replacing transportation with ICT. These tradeoffs are the consequence of many factors, including the particular local electricity mix, meeting duration, number of meeting participants, travel distances, travel modes, motive transport conversion technologies, and transport fuels. Identifying and quantifying these trade-offs is the focus of this research. For this study, a nomenclature and methodology were developed to compare environmental trade-offs associated with transportation and ICT. The nomenclature was designed to facilitate side-by-side comparison of the environmental impacts of travel and ICT and to allow expansion of the nomenclature for future study. The methodology considered a variety of conversion technologies for motive transport including spark-ignition, compression-ignition, fuel cells, and electric motors. Both conventional and developing fuels were considered including gasoline, ethanol, diesel, biodiesel, natural gas, hydrogen, and electricity. Likewise, electricity consumption for ICT included both traditional and developing electricity generation technologies. Carbon dioxide emissions and water consumption for ICT were assessed for comparison with transportation in a case study that demonstrated use of this methodology by considering three distinct scenarios for a particular business meeting: 1. Two meeting attendees travel to the meeting by diesel city bus while two travel in a private vehicle. 2. All four meeting attendees travel by private vehicle powered by compressed natural gas. 3. The four meeting attendees do not travel, but instead meet their clients virtually via ICT. The case study analyzed in this manuscript considers only the water and carbon dioxide impacts, but the nomenclature developed allows future expansion for analysis of other greenhouse gases. The three scenarios revealed that, compared to short travel distances, use of ICT does not always generate fewer carbon dioxide emissions. Depending on the mode of electricity generation, travel proved to be preferable from an emissions standpoint for scenarios in which travel distances were small. However, in cases that required long distances to travel, ICT often allowed businesses and individuals to reduce their environmental impacts, especially if electric power generation in that location utilized large amounts of relatively low-emissions technologies such as hydroelectric dams, wind, solar, and nuclear. Finally, it should be noted that, in addition to comparing ICT and travel impacts, this methodology can be used to calculate the environmental tradeoffs of various transportation options when travel is a necessity.


2011 ◽  
Vol 23 (6) ◽  
pp. 556-566 ◽  
Author(s):  
Ramon Farreny ◽  
Jordi Oliver-Solà ◽  
Machiel Lamers ◽  
Bas Amelung ◽  
Xavier Gabarrell ◽  
...  

AbstractThe increase of tourism to the Antarctic continent may entail not only local but also global environmental impacts. These latter impacts, which are mainly caused by transport, have been generally ignored. As a result, there is a lack of data on the global impacts of Antarctic tourism in terms of energy consumption and carbon dioxide emissions. This paper presents and applies a methodology for quantifying CO2 emissions, both for the Antarctic vessel fleet as a whole and per passenger (both per trip and per day). The results indicate that the average tourist trip to Antarctica results in 5.44 t of CO2 emissions per passenger, or 0.49 t per passenger and day. Approximately 70% of these emissions are attributable to cruising and 30% to flying, which highlights the global environmental relevance of local transport for this type of tourism.


2018 ◽  
Vol 882 ◽  
pp. 182-189
Author(s):  
Andreas Buswell ◽  
Wolfgang Schlüter

This paper describes the necessary measures to create an adaptable material flow and energy simulation for melting and die-casting plants. Based on two reference plants, the structural and intralogistical differences are emphasized and examined. These differences specify the necessary extensions to a previously created simulation environment in order to be able to analyze variable plant configurations. Special emphasis is put on the creation of a simplified energy model that allows the modeling of melting furnaces based on rudimentary datasets. Using the adaptable material flow and energy simulation two measures and their effects on the in-plant energy efficiency as well as productivity are analyzed. The simulation results suggest energy savings potentials for both plants and measures to increase productivity for one of the analyzed plants.


Author(s):  
Angela Pakes ◽  
Tuncer Edil ◽  
Morgan Sanger ◽  
Renee Olley ◽  
Tyler Klink

The conventional highway resurfacing technique of mill and overlay (M&O) partially removes the existing pavement and replaces it with asphalt derived from some recycled but mostly virgin materials. Cold-in-place recycling (CIR) is an alternative highway resurfacing method that partially mills the existing pavement and uses it beneath a thinner layer of new asphalt. CIR has become widely used for convenience and cost benefits, but the environmental impacts are poorly quantified. The objective of this study was to quantify the environmental life cycle benefits of using CIR for highway resurfacing instead of M&O. Material quantities and equipment used for CIR and what would have been used in M&O for the same project were provided by contractors for nine highway resurfacing projects in Wisconsin. With this information, a life cycle assessment (LCA) tool was used to determine the relative environmental impacts of the two methods, with energy consumption, water usage, and carbon dioxide emissions chosen as the metrics of the LCA. Results show average environmental savings of 23% in energy consumption and carbon dioxide emissions and 20% in water consumption when using CIR instead of M&O for highway resurfacing. Additionally, CIR reduced virgin aggregate consumption by 37%. Environmental savings achieved by using CIR were found to be directly related to the reduction in volume of new hot mix asphalt (HMA) used, and to the reduction in transportation of materials to and from the site. Linear correlations that can be used to estimate savings of future CIR projects were projected.


2014 ◽  
Vol 655 ◽  
pp. 47-52 ◽  
Author(s):  
Moritz Hamacher ◽  
Johannes Boehner ◽  
Arnim Reger

This paper presents a flexible measuring system to identify energy efficiency potentials in the context of the ISO 50001 standard. On the basis of five essential requirements the flexible measuring system was structured into 4 modules which can be separately extended or modified. As the flexibility was in focus of the development this system it is able to measure the energy consumption on a very detailed level of the components of a machine. In addition it can also acquire measurement data of different other sensor signals like temperatures, flow rates etc. To evaluate the usability of the system in order to identify energy efficiency measures a use case was conducted. Results of the measurement data as well as possible energy savings of the investigated machinery are discussed at the end of this paper.


2016 ◽  
Vol 04 (02) ◽  
pp. 1650014 ◽  
Author(s):  
Lei HU

At present, there’s no agreement on how income gap affects carbon dioxide emissions. In this study, the author takes an empirical test of the relationship between income gap and carbon dioxide emissions based on the extended IPAT model, using China’s provincial panel data of from 2000 to 2012. The conclusion supports Boyce’s point of view that excessive income gap between urban and rural areas leads to environmental degradation. Meanwhile, the study introduces the cross terms of urban–rural income gap ratio and energy efficiency, and finds that excessive income gap would be an obstacle for China to achieve energy conservation and emission reduction by improving energy efficiency. Therefore, while promoting actions to climate change, energy conservation and emission reduction, governments should also narrow urban–rural income gap besides relying on the restrictions of relevant laws and regulations.


Sign in / Sign up

Export Citation Format

Share Document