Design of a Lightweight Truck Wheel

2015 ◽  
Author(s):  
Massimiliano Gobbi ◽  
Mario Guagliano ◽  
Giampiero Mastinu ◽  
Giorgio Previati ◽  
Andrea Finzi ◽  
...  
Keyword(s):  
Production Process ◽  
High Strength ◽  
Research Activity ◽  
New Production ◽  
Safety Standards ◽  
Current Production ◽  
Definition Of ◽  
Improve Fatigue Strength ◽  
Selection Of ◽  
Improve Fatigue

The presented research activity is focused on the lightweight construction of a of truck wheel, with the final aim of improving the energy efficiency in compliance with current safety standards. On the basis of the design of a truck wheel currently into production, the objective of reducing the wheel mass is achieved by adopting high-strength materials, optimizing the geometry, and developing a new production process. The approach used for the new wheel design is based on the selection of a proper mission of the vehicle and on the acquisition of the loading spectra defined by using a new measuring wheel. The information obtained is used during the structural analysis phase. Based on the current production process, a number of suitable materials have been selected. Innovative manufacturing processes have been considered for improving the fatigue life of the wheel. Shot peening has been considered as a method to improve fatigue strength. Moreover, the introduction of laser cutting and welding led both to more freedom in the definition of the geometry of the wheel and to the reduction of the effects of geometric notches due to the absence of weld beads. A dedicated indoor test rig was used for durability tests. These activities led to a new truck wheel with reduced mass that is currently in the experimental validation phase.

Development of a High-Strength Aluminum Cylinder Block for Diesel Engine Employing a New Production Process

2004 ◽  
Author(s):  
Masakazu Yamazaki ◽  
Atsushi Takai ◽  
Osamu Murakami ◽  
Mitsuhiko Kawabata ◽  
Hitoshi Tanikawa ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Production Process ◽  
High Strength ◽  
Cylinder Block ◽  
New Production ◽  
Aluminum Cylinder

Selection and Preparation of Specific Tissue Regions For Tem Using Large Epoxy-Embedded Blocks

1973 ◽  
Vol 31 ◽  
pp. 324-325 ◽  
Author(s):  
P. M. Lowrie ◽  
W. S. Tyler
Keyword(s):  
Electron Microscopy ◽  
Anatomical Structures ◽  
Ultrastructural Studies ◽  
Transmission Electron ◽  
Microscopic Evaluation ◽  
Embedded Blocks ◽  
Specific Tissue ◽  
Definition Of ◽  
Areas Of Interest ◽  
Selection Of

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).

scholarly journals Promotion of Resilience in Migrants: A Systematic Review of Study and Psychosocial Intervention

2021 ◽  
Author(s):  
Maria Ciaramella ◽  
Nadia Monacelli ◽  
Livia Concetta Eugenia Cocimano
Keyword(s):  
Systematic Review ◽  
Psychosocial Intervention ◽  
Life Experiences ◽  
Psychosocial Interventions ◽  
Migrant Population ◽  
Methodological Choices ◽  
Research Questions ◽  
Definition Of ◽  
Selection Of

AbstractThis systematic review aimed to contribute to a better and more focused understanding of the link between the concept of resilience and psychosocial interventions in the migrant population. The research questions concerned the type of population involved, definition of resilience, methodological choices and which intervention programmes were targeted at migrants. In the 90 articles included, an heterogeneity in defining resilience or not well specified definition resulted. Different migratory experiences were not adequately considered in the selection of participants. Few resilience interventions on migrants were resulted. A lack of procedure’s descriptions that keep in account specific migrants’ life-experiences and efficacy’s measures were highlighted.

scholarly journals Flying Free: A Research Overview of Deep Learning in Drone Navigation Autonomy

Drones ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 52
Author(s):  
Thomas Lee ◽  
Susan Mckeever ◽  
Jane Courtney
Keyword(s):  
Deep Learning ◽  
Research Work ◽  
Learning Approaches ◽  
Clear Definition ◽  
Top Down ◽  
Research Activity ◽  
Comprehensive Overview ◽  
The Past ◽  
Computer Vision Applications ◽  
Definition Of

With the rise of Deep Learning approaches in computer vision applications, significant strides have been made towards vehicular autonomy. Research activity in autonomous drone navigation has increased rapidly in the past five years, and drones are moving fast towards the ultimate goal of near-complete autonomy. However, while much work in the area focuses on specific tasks in drone navigation, the contribution to the overall goal of autonomy is often not assessed, and a comprehensive overview is needed. In this work, a taxonomy of drone navigation autonomy is established by mapping the definitions of vehicular autonomy levels, as defined by the Society of Automotive Engineers, to specific drone tasks in order to create a clear definition of autonomy when applied to drones. A top–down examination of research work in the area is conducted, focusing on drone navigation tasks, in order to understand the extent of research activity in each area. Autonomy levels are cross-checked against the drone navigation tasks addressed in each work to provide a framework for understanding the trajectory of current research. This work serves as a guide to research in drone autonomy with a particular focus on Deep Learning-based solutions, indicating key works and areas of opportunity for development of this area in the future.

scholarly journals Getting to Hope: Perspectives from Patients and Caregivers Living with Chronic Childhood Illness

Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 525
Author(s):  
Emily von Scheven ◽  
Bhupinder K. Nahal ◽  
Rosa Kelekian ◽  
Christina Frenzel ◽  
Victoria Vanderpoel ◽  
...  
Keyword(s):  
Conceptual Model ◽  
Research Question ◽  
Young Patients ◽  
Future Research ◽  
Childhood Onset ◽  
Virtual Focus Groups ◽  
Definition Of ◽  
Selection Of ◽  
Chronic Childhood ◽  
Research Studies

Promoting hope was identified in our prior work as the top priority research question among patients and caregivers with diverse childhood-onset chronic conditions. Here, we aimed to construct a conceptual model to guide future research studies of interventions to improve hope. We conducted eight monthly virtual focus groups and one virtual workshop with patients, caregivers, and researchers to explore key constructs to inform the model. Discussions were facilitated by Patient Co-Investigators. Participants developed a definition of hope and identified promotors and inhibitors that influence the experience of hope. We utilized qualitative methods to analyze findings and organize the promotors and inhibitors of hope within three strata of the socio-ecologic framework: structural, interpersonal, and intrapersonal. Participants identified three types of interventions to promote hope: resources, navigation, and activities to promote social connection. The hope conceptual model can be used to inform the selection of interventions to assess in future research studies aimed at improving hope and the specification of outcome measures to include in hope research studies. Inclusion of the health care system in the model provides direction for identifying strategies for improving the system and places responsibility on the system to do better to promote hope among young patients with chronic illness and their caregivers.

scholarly journals Examining and Fine-tuning the Selection of Glycan Compositions with GlyConnect Compozitor

2020 ◽  
Vol 19 (10) ◽  
pp. 1602-1618 ◽  
Author(s):  
Thibault Robin ◽  
Julien Mariethoz ◽  
Frédérique Lisacek
Keyword(s):  
Search Engine ◽  
Posttranslational Modifications ◽  
Search Engines ◽  
Web Application ◽  
Contextual Information ◽  
Fine Tuning ◽  
Data Sources ◽  
Web Interface ◽  
Definition Of ◽  
Selection Of

A key point in achieving accurate intact glycopeptide identification is the definition of the glycan composition file that is used to match experimental with theoretical masses by a glycoproteomics search engine. At present, these files are mainly built from searching the literature and/or querying data sources focused on posttranslational modifications. Most glycoproteomics search engines include a default composition file that is readily used when processing MS data. We introduce here a glycan composition visualizing and comparative tool associated with the GlyConnect database and called GlyConnect Compozitor. It offers a web interface through which the database can be queried to bring out contextual information relative to a set of glycan compositions. The tool takes advantage of compositions being related to one another through shared monosaccharide counts and outputs interactive graphs summarizing information searched in the database. These results provide a guide for selecting or deselecting compositions in a file in order to reflect the context of a study as closely as possible. They also confirm the consistency of a set of compositions based on the content of the GlyConnect database. As part of the tool collection of the Glycomics@ExPASy initiative, Compozitor is hosted at https://glyconnect.expasy.org/compozitor/ where it can be run as a web application. It is also directly accessible from the GlyConnect database.

General Schema Theory for Genetic Programming with Subtree-Swapping Crossover: Part II

2003 ◽  
Vol 11 (2) ◽  
pp. 169-206 ◽  
Author(s):  
Riccardo Poli ◽  
Nicholas Freitag McPhee
Keyword(s):  
Genetic Programming ◽  
Schema Theory ◽  
Exact Formulation ◽  
Expected Number ◽  
Size Evolution ◽  
General Schema ◽  
Definition Of ◽  
Effective Fitness ◽  
Selection Of ◽  
Exact Definition

This paper is the second part of a two-part paper which introduces a general schema theory for genetic programming (GP) with subtree-swapping crossover (Part I (Poli and McPhee, 2003)). Like other recent GP schema theory results, the theory gives an exact formulation (rather than a lower bound) for the expected number of instances of a schema at the next generation. The theory is based on a Cartesian node reference system, introduced in Part I, and on the notion of a variable-arity hyperschema, introduced here, which generalises previous definitions of a schema. The theory includes two main theorems describing the propagation of GP schemata: a microscopic and a macroscopic schema theorem. The microscopic version is applicable to crossover operators which replace a subtree in one parent with a subtree from the other parent to produce the offspring. Therefore, this theorem is applicable to Koza's GP crossover with and without uniform selection of the crossover points, as well as one-point crossover, size-fair crossover, strongly-typed GP crossover, context-preserving crossover and many others. The macroscopic version is applicable to crossover operators in which the probability of selecting any two crossover points in the parents depends only on the parents' size and shape. In the paper we provide examples, we show how the theory can be specialised to specific crossover operators and we illustrate how it can be used to derive other general results. These include an exact definition of effective fitness and a size-evolution equation for GP with subtree-swapping crossover.

Military Targeting in the Context of Self-Defence Actions

2015 ◽  
Vol 84 (1) ◽  
pp. 3-28 ◽  
Author(s):  
James A. Green ◽  
Christopher P.M. Waters
Keyword(s):  
Target Selection ◽  
Jus In Bello ◽  
Customary International Law ◽  
Jus Ad Bellum ◽  
Conceptual Clarity ◽  
Starting Point ◽  
Definition Of ◽  
The Relationship ◽  
Self Defence ◽  
Selection Of

For self-defence actions to be lawful, they must be directed at military targets. The absolute prohibition on non-military targeting under the jus in bello is well known, but the jus ad bellum also limits the target selection of states conducting defensive operations. Restrictions on targeting form a key aspect of the customary international law criteria of necessity and proportionality. In most situations, the jus in bello will be the starting point for the definition of a military targeting rule. Yet it has been argued that there may be circumstances when the jus ad bellum and the jus in bello do not temporally or substantively overlap in situations of self-defence. In order to address any possible gaps in civilian protection, and to bring conceptual clarity to one particular dimension of the relationship between the two regimes, this article explores the independent sources of a military targeting rule. The aim is not to displace the jus in bello as the ‘lead’ regime on how targeting decisions must be made, or to undermine the traditional separation between the two ‘war law’ regimes. Rather, conceptual light is shed on a sometimes assumed but generally neglected dimension of the jus ad bellum’s necessity and proportionality criteria that may, in limited circumstances, have significance for our understanding of human protection during war.

Sign in / Sign up

Export Citation Format

Share Document