Analysis and Optimal Placement of Particle Dampers Based on Discrete Element Simulation

2015 ◽  
Author(s):  
Shilong Li ◽  
Jiong Tang
Keyword(s):  
Energy Dissipation ◽  
Discrete Element ◽  
Optimal Placement ◽  
Time Simulation ◽  
Highly Nonlinear ◽  
Wide Range ◽  
Particle Damping ◽  
Long Time ◽  
Host Structure ◽  
Particle Dampers

Particle damper is formed by granular particles enclosed in a container which is attached to or embedded in a vibrating structure. The energy dissipation mechanism of a particle damper is highly nonlinear, and derived from a combination of collision/impact and friction among particles and between particles and the enclosure. Meanwhile, the coupling between particle dampers and the host structure and among multiple dampers further increases the difficulty to analyze the particle damping performance. In this paper, a new coupling method is developed to integrate the continuous host system with multiple particle dampers to analyze the energy transfer between the host structure and the dampers. The discrete element method (DEM) is employed to describe and analyze the particle motion inside each damper, which accurately accounts for various energy dissipation mechanisms of the particle damping system. In order to enhance the computational efficiency, a Verlet table combined with LC method is also used to improve the contact detection since the long time simulation is needed to perform damping analysis under a wide range of frequencies. The damping effect under different arrangements of particle dampers on a clamped-free beam is analyzed, and the results indicate that the optimal positions of dampers not only rely on the mode shape of the system, but also are dependent upon the excitation level.

scholarly journals Damping prediction of particle dampers for structures under forced vibration using effective fields

2021 ◽  
Vol 23 (3) ◽  
Author(s):  
Niklas Meyer ◽  
Robert Seifried
Keyword(s):  
Energy Dissipation ◽  
Knowledge Exchange ◽  
Underlying Structure ◽  
Reduction Techniques ◽  
Linear Behavior ◽  
Damping Behavior ◽  
Effective Particle ◽  
Coupling Procedure ◽  
Particle Damping ◽  
Particle Dampers

AbstractParticle damping is a promising damping technique for a variety of technical applications. However, their non-linear behavior and multitude of influence parameters, hinder currently its wide practical use. So far, most researchers focus either on determining the energy dissipation inside the damper or on the overall damping behavior when coupled to a structure. Indeed, currently almost no knowledge exchange between both approaches occurs. Here, a bridge is build to combine both techniques for systems under forced vibrations by coupling the energy dissipation field and effective particle mass field of a particle damper with a reduced model of a vibrating structure. Thus, the overall damping of the structure is estimated very quickly. This combination of both techniques is essential for an overall efficient dimensioning process and also provides a deeper understanding of the dynamical processes. The accuracy of the proposed coupling method is demonstrated via a simple application example. Hereby, the energy dissipation and effective mass of the particle damper are analyzed for a large excitation range first using a shaker setup. The particle damper exhibits multiple areas of different efficiency. The underlying structure is modeled using FEM and modal reduction techniques. By coupling both parts it is shown that multiple eigenmodes of the structure are highly damped using the particle damper. The damping prediction using the developed coupling procedure is validated via experiments of the overall structure with particle damper.

scholarly journals Study on the Damping Effect of Particle Dampers considering Different Surface Properties

2019 ◽  
Vol 2019 ◽  
pp. 1-16
Author(s):  
Xiaowei Li ◽  
Yue Yang ◽  
Weixing Shi
Keyword(s):  
Energy Dissipation ◽  
Surface Property ◽  
Material Selection ◽  
Great Influence ◽  
Contact Theory ◽  
Theoretic Model ◽  
The Finite Element Method ◽  
Particle Damping ◽  
Vibration Experiment ◽  
Particle Dampers

Particle dampers are nonlinear vibration control devices. The surface property has a great influence on the performance of the particle damper, but it is difficult to be considered and analyzed. This paper firstly gives a view of how to establish a theoretic model of the particle damper. The dynamic equation and energy dissipation coefficient of collision are revised from the Hertz contact theory in the proposed theoretic model, considering the friction of particles. Then, a contrastive collision model relying on the finite element method is established to verify the reasonability of the theoretic model. The effects of different factors which will have an influence on the performance of the particle damper are discussed, and several conclusions on how to optimize the particle damper are proposed. Except for the aforementioned dynamic analysis, this paper also presents a particle damping index to evaluate the capability of energy dissipation of different materials, in order to facilitate the material selection in the practical design. Finally, an experiment is developed to verify the character of the collision and energy dissipation. The feasibility of the proposed method to estimate the surface property of different particles is validated by the free vibration experiment.

scholarly journals Vibration Response Prediction of Plate with Particle Dampers Using Cosimulation Method

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Dongqiang Wang ◽  
Chengjun Wu
Keyword(s):  
Low Cost ◽  
Response Prediction ◽  
Element Model ◽  
Simulation Method ◽  
Control Technique ◽  
Viscous Damping ◽  
Wide Range ◽  
Particle Damping ◽  
Study Characteristics ◽  
Particle Dampers

The particle damping technology is a passive vibration control technique. The particle dampers (PDs) as one of the passive damping devices has found wide use in the field of aeronautical engineering, mechanical engineering, and civil engineering because it has several advantages compared with the forms of viscous damping, for example, structure simplicity, low cost, robust properties, and being effective over a wide range of frequencies. In this paper, a novelty simulation method based on multiphase flow theory (MFT) is developed to evaluate the particle damping characteristics using FEM combining DEM with COMSOL Multiphysics. First, the effects of the collisions and friction between the particles are interpreted as an equivalent nonlinear viscous damping based on MFT of gas particle. Next, the contribution of PDs is estimated as equivalent spring-damper system. Then a cantilever rectangular plate treated with PDs is introduced in a finite element model of structure system. Finally frequency response functions (FRFs) of the plate without and with particle dampers are predicted to study characteristics of the particle damping plates under forced vibration. Meanwhile, an experimental verification is performed. Simulation results are in good agreement with experiment date. It is concluded that the simulation method in this paper is valid.

Research on Blade with Particle Dampers

2012 ◽  
Vol 479-481 ◽  
pp. 1307-1309
Author(s):  
Zhao Wang Xia ◽  
Yuan Yuan Fang
Keyword(s):  
Particle Size ◽  
Energy Dissipation ◽  
Momentum Transfer ◽  
Extreme Temperature ◽  
Simulation Algorithm ◽  
Particle Material ◽  
Highly Nonlinear ◽  
Particle Dampers

The performance of particle damper is highly nonlinear whose energy dissipation is derived from a combination of mechanisms including plastic collisions, friction, and momentum transfer between particles. Particle damper can be applied in extreme temperature environments. In this paper, an investigation on particle damper is performed analytically and experimentally. A simulation algorithm and results of simulative studies aimed at understanding the effects of parameters of particle damper are presented. Parameters considered include damper geometry, particle material and particle size.

The Problem of Identifying and Modeling the Relationship between Monetary Factor and Inflation in the Russian Economy

2008 ◽  
pp. 61-76
Author(s):  
A. Porshakov ◽  
A. Ponomarenko
Keyword(s):  
Money Supply ◽  
Money Demand ◽  
Russian Economy ◽  
Long Run ◽  
Complex Approach ◽  
Wide Range ◽  
Long Time ◽  
The Relationship ◽  
Supply Side Factors

The role of monetary factor in generating inflationary processes in Russia has stimulated various debates in social and scientific circles for a relatively long time. The authors show that identification of the specificity of relationship between money and inflation requires a complex approach based on statistical modeling and involving a wide range of indicators relevant for the price changes in the economy. As a result a model of inflation for Russia implying the decomposition of inflation dynamics into demand-side and supply-side factors is suggested. The main conclusion drawn is that during the recent years the volume of inflationary pressures in the Russian economy has been determined by the deviation of money supply from money demand, rather than by money supply alone. At the same time, monetary factor has a long-run spread over time impact on inflation.

Comperehencive review of Tankana

2018 ◽  
Vol 3 (4) ◽  
Author(s):  
Dr. Jyotsna Sankpal ◽  
Dr. Jyotsna Takalikar
Keyword(s):  
Heart Disease ◽  
Medical Science ◽  
Menstrual Disorders ◽  
Therapeutic Applications ◽  
Indian Medical ◽  
Wide Range ◽  
Long Time

Rasa Shastra and Bhaishajya Kalpana is branch of the ancient Indian medical science based on herbs and herbo-mineral preparation. Tankana has been described under Uparasa Tankana, which is one among the Kshara Trayas has been used since very long time in Ayurveda. It has a wide range of therapeutic applications, including diseases like Varna (ulcers), Shvasa (asthma), Kasa (cough), Hrudya (beneficial to heart disease), Streepushpajanana (menstrual disorders) etc. It is used in the form of compound formulations like Parpati, Kupipakwa, Khalvee Rasayana, Churna, Vati, Lepa etc. In this paper Tankana Shodhana procedure, different synonyms, dose, Anupana, indications and different formulations containing Tankana Bhasma has been discussed.

scholarly journals Machine learning for multi-dimensional optimisation and predictive visualisation of laser machining

2021 ◽  
Author(s):  
Michael D. T. McDonnell ◽  
Daniel Arnaldo ◽  
Etienne Pelletier ◽  
James A. Grant-Jacob ◽  
Matthew Praeger ◽  
...  
Keyword(s):  
Short Pulse ◽  
Surface Texturing ◽  
Laser Surface Texturing ◽  
Laser Machining ◽  
Laser Materials ◽  
Parameter Optimisation ◽  
Short Pulse Laser ◽  
Alternative Approach ◽  
Highly Nonlinear ◽  
Wide Range

AbstractInteractions between light and matter during short-pulse laser materials processing are highly nonlinear, and hence acutely sensitive to laser parameters such as the pulse energy, repetition rate, and number of pulses used. Due to this complexity, simulation approaches based on calculation of the underlying physical principles can often only provide a qualitative understanding of the inter-relationships between these parameters. An alternative approach such as parameter optimisation, often requires a systematic and hence time-consuming experimental exploration over the available parameter space. Here, we apply neural networks for parameter optimisation and for predictive visualisation of expected outcomes in laser surface texturing with blind vias for tribology control applications. Critically, this method greatly reduces the amount of experimental laser machining data that is needed and associated development time, without negatively impacting accuracy or performance. The techniques presented here could be applied in a wide range of fields and have the potential to significantly reduce the time, and the costs associated with laser process optimisation.

scholarly journals Developing an end-to-end simulation framework of supernova neutrino detection

2020 ◽  
Author(s):  
Masamitsu Mori ◽  
Yudai Suwa ◽  
Ken’ichiro Nakazato ◽  
Kohsuke Sumiyoshi ◽  
Masayuki Harada ◽  
...  
Keyword(s):  
Neutron Star ◽  
Neutrino Emission ◽  
Neutrino Detectors ◽  
Sn 1987A ◽  
Neutrino Detection ◽  
Time Simulation ◽  
Consistent Manner ◽  
Long Time ◽  
Neutron Star Cooling ◽  
Proto Neutron Star

Abstract Massive stars can explode as supernovae at the end of their life cycle, releasing neutrinos whose total energy reaches 1053erg. Moreover, neutrinos play key roles in supernovae, heating and reviving the shock wave as well as cooling the resulting proto-neutron star. Therefore, neutrino detectors are waiting to observe the next galactic supernova and several theoretical simulations of supernova neutrinos are underway. While these simulation concentrate mainly on only the first one second after the supernova bounce, the only observation of a supernova with neutrinos, SN 1987A, revealed that neutrino emission lasts for more than 10 seconds. For this reason, long-time simulation and analysis tools are needed to compare theories with the next observation. Our study is to develop an integrated supernova analysis framework to prepare an analysis pipeline for treating galactic supernovae observations in the near future. This framework deals with the core-collapse, bounce and proto-neutron star cooling processes, as well as with neutrino detection on earth in a consistent manner. We have developed a new long-time supernova simulation in one dimension that explodes successfully and computes the neutrino emission for up to 20 seconds. Using this model we estimate the resulting neutrino signal in the Super-Kamiokande detector to be about 1,800 events for an explosion at 10 kpc and discuss its implications in this paper. We compare this result with the SN 1987A observation to test its reliability.

Observations of Small-Scale Turbulence and Energy Dissipation Rates in the Cloudy Boundary Layer

2006 ◽  
Vol 63 (5) ◽  
pp. 1451-1466 ◽  
Author(s):  
Holger Siebert ◽  
Katrin Lehmann ◽  
Manfred Wendisch
Keyword(s):  
Boundary Layer ◽  
Energy Dissipation ◽  
Wind Velocity ◽  
Turbulence Theory ◽  
Horizontal Wind ◽  
Inertial Subrange ◽  
Intermittent Flow ◽  
Small Scale ◽  
Dissipation Rates ◽  
Wide Range

Abstract Tethered balloon–borne measurements with a resolution in the order of 10 cm in a cloudy boundary layer are presented. Two examples sampled under different conditions concerning the clouds' stage of life are discussed. The hypothesis tested here is that basic ideas of classical turbulence theory in boundary layer clouds are valid even to the decimeter scale. Power spectral densities S( f ) of air temperature, liquid water content, and wind velocity components show an inertial subrange behavior down to ≈20 cm. The mean energy dissipation rates are ∼10−3 m2 s−3 for both datasets. Estimated Taylor Reynolds numbers (Reλ) are ∼104, which indicates the turbulence is fully developed. The ratios between longitudinal and transversal S( f ) converge to a value close to 4/3, which is predicted by classical turbulence theory for local isotropic conditions. Probability density functions (PDFs) of wind velocity increments Δu are derived. The PDFs show significant deviations from a Gaussian distribution with longer tails typical for an intermittent flow. Local energy dissipation rates ɛτ are derived from subsequences with a duration of τ = 1 s. With a mean horizontal wind velocity of 8 m s−1, τ corresponds to a spatial scale of 8 m. The PDFs of ɛτ can be well approximated with a lognormal distribution that agrees with classical theory. Maximum values of ɛτ ≈ 10−1 m2 s−3 are found in the analyzed clouds. The consequences of this wide range of ɛτ values for particle–turbulence interaction are discussed.

Sign in / Sign up

Export Citation Format

Share Document