Evaluation of the Energy Efficiency Effectiveness of Cool Roofs for Residential Applications

2014 ◽  
Author(s):  
Moncef Krarti
Keyword(s):  
Energy Cost ◽  
Energy Use ◽  
High Efficiency ◽  
Simulation Analysis ◽  
Residential Building ◽  
Cost Effective ◽  
Climate Zones ◽  
Heating And Cooling ◽  
Building Models ◽  
Cool Roofs

This study determines the effects of cool roofs on a home’s energy use, specifically on heating and cooling energy end-uses. Representative cities were chosen for several ASHRAE US climate zones. A series of parametric simulations in EnergyPlus was carried out to assess the performance of cool roofs for selected prototypical residential building models using detailed simulation analysis. The simulation results are then correlated for each climate zone type to give an approximation of the best roof color per climate. The results are given based on total energy used as well as energy cost based on national average electricity and natural gas residential rates. This method allows builders and homeowners the choice between the most cost effective roofing type, and the most energy efficient in the case that they are not the same. Overall, it was found that in hot climates, it is more efficient to have a white roof, while a black roof benefits cooler climates. In mild and mixed climates, the effect of roof color was found rather are different for energy use and energy cost. Therefore the choice is determined by the owner’s requirements. In the cooler and milder climate zones, the analysis shows that the cost excess or savings is fairly small; usually under $10 difference per year. Hotter climates also have a relatively small effect, but more so than the cooler climates, with Phoenix especially showing a savings of $48.60 per year when a white roof is used over a black roof. Energy changes as low as only 4% in the as-built construction style, or as high as nearly 100% change in upgraded envelope cases were found. The study further finds that both the lack of an attic, and high efficiency envelopes increases the magnitude of the percent change in energy requirements.

scholarly journals Thermochromic Paints on External Surfaces: Impact Assessment for a Residential Building through Thermal and Energy Simulation

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1912 ◽  
Author(s):  
Vasco Granadeiro ◽  
Margarida Almeida ◽  
Tiago Souto ◽  
Vítor Leal ◽  
João Machado ◽  
...  
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Cost Effective ◽  
Physical Models ◽  
Indoor Temperature ◽  
Heating And Cooling ◽  
Step Transition ◽  
Linear Manner

This work addresses the effect of using thermochromic paints in residential buildings. Two different thermochromic paint types were considered: One that changes properties through a step transition at a certain temperature, and another that changes properties in a gradual/linear manner throughout a temperature range. The studied building was a two-floor villa, virtually simulated through a digital model with and without thermal insulation, and considering thermochromic paints applied both on external walls and on the roof. The performance assessment was done through the energy use for heating and cooling (in conditioned mode), as well as in terms of the indoor temperature (in free-floating mode). Three different cities/climates were considered: Porto, Madrid, and Abu Dhabi. Results showed that energy savings up to 50.6% could be reached if the building is operated in conditioned mode. Conversely, when operated in free-floating mode, optimally selected thermochromic paints enable reductions up to 11.0 °C, during summertime, and an increase up to 2.7 °C, during wintertime. These results point out the great benefits of using optimally selected thermochromic paints for obtaining thermal comfort, and also the need to further develop stable and cost-effective thermochromic pigments for outdoor applications, as well as to test physical models in a real environment.

scholarly journals Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3876
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Aiman Albatayneh ◽  
Patrick Dutournie ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Models ◽  
Water Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Cooling Loads

Since buildings are one of the major contributors to global warming, efforts should be intensified to make them more energy-efficient, particularly existing buildings. This research intends to analyze the energy savings from a suggested retrofitting program using energy simulation for typical existing residential buildings. For the assessment of the energy retrofitting program using computer simulation, the most commonly utilized residential building types were selected. The energy consumption of those selected residential buildings was assessed, and a baseline for evaluating energy retrofitting was established. Three levels of retrofitting programs were implemented. These levels were ordered by cost, with the first level being the least costly and the third level is the most expensive. The simulation models were created for two different types of buildings in three different climatic zones in Palestine. The findings suggest that water heating, space heating, space cooling, and electric lighting are the highest energy consumers in ordinary houses. Level one measures resulted in a 19–24 percent decrease in energy consumption due to reduced heating and cooling loads. The use of a combination of levels one and two resulted in a decrease of energy consumption for heating, cooling, and lighting by 50–57%. The use of the three levels resulted in a decrease of 71–80% in total energy usage for heating, cooling, lighting, water heating, and air conditioning.

scholarly journals Long-Term Prediction of Weather for Analysis of Residential Building Energy Consumption in Australia

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4805
Author(s):  
Shu Chen ◽  
Zhengen Ren ◽  
Zhi Tang ◽  
Xianrong Zhuo
Keyword(s):  
Climate Change ◽  
Energy Consumption ◽  
Residential Building ◽  
Building Energy ◽  
Space Heating ◽  
Building Energy Consumption ◽  
Climate Zones ◽  
Impact Of Climate Change ◽  
Heating And Cooling ◽  
The Impact

Globally, buildings account for nearly 40% of the total primary energy consumption and are responsible for 20% of the total greenhouse gas emissions. Energy consumption in buildings is increasing with the increasing world population and improving standards of living. Current global warming conditions will inevitably impact building energy consumption. To address this issue, this report conducted a comprehensive study of the impact of climate change on residential building energy consumption. Using the methodology of morphing, the weather files were constructed based on the typical meteorological year (TMY) data and predicted data generated from eight typical global climate models (GCMs) for three representative concentration pathways (RCP2.6, RCP4.5, and RCP8.5) from 2020 to 2100. It was found that the most severe situation would occur in scenario RCP8.5, where the increase in temperature will reach 4.5 °C in eastern Australia from 2080–2099, which is 1 °C higher than that in other climate zones. With the construction of predicted weather files in 83 climate zones all across Australia, ten climate zones (cities)—ranging from heating-dominated to cooling-dominated regions—were selected as representative climate zones to illustrate the impact of climate change on heating and cooling energy consumption. The quantitative change in the energy requirements for space heating and cooling, along with the star rating, was simulated for two representative detached houses using the AccuRate software. It could be concluded that the RCP scenarios significantly affect the energy loads, which is consistent with changes in the ambient temperature. The heating load decreases for all climate zones, while the cooling load increases. Most regions in Australia will increase their energy consumption due to rising temperatures; however, the energy requirements of Adelaide and Perth would not change significantly, where the space heating and cooling loads are balanced due to decreasing heating and increasing cooling costs in most scenarios. The energy load in bigger houses will change more than that in smaller houses. Furthermore, Brisbane is the most sensitive region in terms of relative space energy changes, and Townsville appears to be the most sensitive area in terms of star rating change in this study. The impact of climate change on space building energy consumption in different climate zones should be considered in future design strategies due to the decades-long lifespans of Australian residential houses.

Roof Cover Impact on Cooling Energy Use of Office Buildings

2014 ◽  
Author(s):  
Moncef Krarti
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Simulation Analysis ◽  
Calculation Model ◽  
Office Building ◽  
Climate Zones ◽  
Building Energy Use ◽  
Detailed Simulation ◽  
Simplified Calculation ◽  
The Impact

This paper analyzes the impact of roof covers on office building energy use for representative US climate zones. In particular, the study presented in the paper investigates the potential annual cooling energy use savings that roof covers could provide using whole-building simulation analysis to evaluate the performance of a 2-story office building in five US locations. Three parameters of the roof covers including their size, height, and transmittance, are considered in the analysis. The simulation results indicate that while roof covers had similar affects on buildings in all climate zones, their impact in reducing cooling energy usage is different and is more pronounced in cooler climates. Specifically, roof covers could potentially achieve cooling energy savings of up to: 25% in Houston, 33% in Atlanta, 31% in Nashville, 38% in Chicago, and 41% in Madison. Based on the detailed simulation analysis results, a simplified calculation model is developed to help the estimation of cooling energy savings as a function of the roof cover size, height, and transmittance.

COMPARISON OF COOLING AND HEATING REQUIREMENTS BETWEEN BRICK VENEER AND FIBRO CEMENT WALLING SYSTEM

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Swapan Saha ◽  
Dharma Hagare ◽  
Jiaqi Zhou ◽  
Md Kamrul Hassan
Keyword(s):  
Energy Consumption ◽  
Energy Cost ◽  
Energy Use ◽  
Net Present Value ◽  
Space Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Brick Veneer ◽  
Save Energy ◽  
Modern House

Space cooling and heating in residential sector is significant contributor to energy consumption in Australia. Therefore, it is important to reduce the cooling and heating requirements. The selection of a good walling system helps to save energy by homes. This research compared the thermal efficiency of a modern house (constructed using brick veneer walls with concrete floor slab) with an old house (constructed using fibro cement walls raised timber floor) using the AccuRate simulation tool. A standard house with two living rooms, one kitchen, one laundry and four bedrooms are simulated in a Sydney Suburb in Australia. It was found that modern house showed lower inside temperature variation than the old house all year around. The results also showed that the modern house has a lower energy consumption for space heating and cooling than the old house. The annual energy use for space heating and cooling in both the modern house and old house were 5197 kWh and 15,712 kWh respectively. Moreover, the annual energy costs were found to be $1,403 and $4,242 respectively for modern and old houses. The modern brick veneer house saved about 33 % of energy compared to old old house. When the net present value of the energy cost for f both houses over 50 years is computed, the energy cost of modern house was found to be $25,629 while it of old house is was $77,488 for the old house.

scholarly journals THE SIMULATION ANALYSIS OF A PROPOSED ‘HYDRONIC RADIATOR’ SYSTEM TOWARDS LOW COST HOUSING OPERATION IN TEMPERATE AND HOT TROPICAL CLIMATES

2020 ◽  
Vol 15 (1) ◽  
pp. 73-86
Author(s):  
Masa Noguchi ◽  
Koon Beng Ooi
Keyword(s):  
Energy Use ◽  
Simulation Analysis ◽  
Low Cost ◽  
Heat Removal ◽  
Space Heating ◽  
Geothermal Heat ◽  
Renewable Sources ◽  
Heating And Cooling ◽  
Test House ◽  
Flow Through

ABSTRACT Fuel poverty is one of the global concerns affecting not only users' financial capacity or affordability for maintaining housing operation but also the occupants' health and wellbeing. Space heating and cooling require a relatively large amount of domestic energy use in housing. Therefore, this study was formed with the aim to propose an innovative approach to utilising free, clean renewable sources of energy applicable to the space heating and cooling of housing in both cold and hot regions. Accordingly, housing test facilities based in Melbourne, Australia, and Kuching, Malaysia, were selected and used for this study that examined the thermal performance of a proposed ‘hydronic radiator’ (HR) system through simulation and onsite measurements. The geothermal heat capacity of a ‘vertical ground heat exchanger’ (VGHE) installed in the house in Melbourne was examined previously by the authors and the VGHE measured data was also applied to this HR performance simulation. The water that circulates through the HRs is heated by sunlight and VGHE or cooled by night sky radiation. This study drew conclusions that the sole utilisation of renewable sources through these proposed HR space heating and cooling systems can provide thermally accessible or comfortable indoor living environments in both heating or cooling dominant regions. Thus, fuel poverty issues may be alleviated through HR system application. The HRs can remove a ‘sensible’ portion of metabolic heat, but they cannot effectively contribute to the ‘latent’ heat removal. Thus, the future potential use or effect of ‘flow-through’ HRs, which are integrated into a underfloor air distribution (UFAD) plenum, was also dsicussed in this study. In the test house located in Melbourne, the flow-through HR UFAD system is currently under development. Therefore, the performance will be measured once the system has come into operation for further testing.

Design Optimization of Energy Efficient Office Buildings in Tunisia

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Pyeongchan Ihm ◽  
Moncef Krarti
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
High Performance ◽  
Energy Use ◽  
Cost Effective ◽  
Energy Performance ◽  
High Energy ◽  
Office Buildings ◽  
Optimization Approach ◽  
Heating And Cooling

Optimal and cost-effective energy efficiency design and operation options are evaluated for office buildings in Tunisia. In the analysis, several design and operation features are considered including orientation, window location and size, high performance glazing types, wall and roof insulation levels, energy efficient lighting systems, daylighting controls, temperature settings, and energy efficient heating and cooling systems. First, the results of the optimization results from a sequential search technique are compared against those obtained by a more time consuming brute-force optimization approach. Then, the optimal design features for a prototypical office building are determined for selected locations in Tunisia. The optimization results indicate that utilizing daylighting controls, energy efficient lighting fixtures, and low-e double glazing, and roof insulation are required energy efficiency measures to design high energy performance office buildings throughout climatic zones in Tunisia. In particular, it is found that implementing these measures can cost-effectively reduce the annual energy use by 50% compared to the current design practices of office buildings in Tunisia.

Analysis of the Energy Saving Potentials for Near-Zero Energy Buildings in Shanghai

2011 ◽  
Author(s):  
Joe Huang ◽  
Donghyun Seo ◽  
Moncef Krarti
Keyword(s):  
Energy Efficiency ◽  
Energy Use ◽  
Energy Savings ◽  
Cost Effective ◽  
Building Energy ◽  
Hot Water ◽  
Energy Usage ◽  
Ground Source Heat Pumps ◽  
Capital Costs ◽  
Building Models

The Changning District in Shanghai has expressed interest to becoming a green neighborhood and has asked for recommendations on how to reduce the energy usage in public buildings in their district. The objective of this short study is to identify the likely range of further reductions in the energy use and carbon emissions of new buildings through energy-efficiency improvements and the use of renewable energy, i.e., solar hot water (SHW), photovoltaics (PV), and ground-source heat pumps (GSHP), as compared to buildings that meet the current public building energy code in Shanghai. This analysis is done using DOE-2.1E computer simulations of three prototypical building models — an office, a hotel, and a mixed-use retail/office building — that have been calibrated against measured energy data from such buildings in the Changning District. After the building models have been calibrated, they are then used to establish the baseline energy use for code-compliant buildings, and to calculate the energy savings for 16 potential EEMs (Energy Efficiency Measures) that exceed the building energy code. A LCC (Life-Cycle Cost) analysis is done to compare the energy cost reductions to the capital costs for the EEMs, with the result that some EEMs are rejected as being not cost-effective over a 25 year period. The usage of the EEMs accepted as cost-effective is found to reduce the energy usage of the three building types by 30–40% in the office, 43–46% in the hotel, and 35% in the retail, depending on the assumed discount rate. If all the EEMs are considered regardless of cost, the energy savings increase to 44% in the office, 47% in the hotel, and 36% in the retail.

Sign in / Sign up

Export Citation Format

Share Document