scholarly journals Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3876
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Aiman Albatayneh ◽  
Patrick Dutournie ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Models ◽  
Water Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Cooling Loads

Since buildings are one of the major contributors to global warming, efforts should be intensified to make them more energy-efficient, particularly existing buildings. This research intends to analyze the energy savings from a suggested retrofitting program using energy simulation for typical existing residential buildings. For the assessment of the energy retrofitting program using computer simulation, the most commonly utilized residential building types were selected. The energy consumption of those selected residential buildings was assessed, and a baseline for evaluating energy retrofitting was established. Three levels of retrofitting programs were implemented. These levels were ordered by cost, with the first level being the least costly and the third level is the most expensive. The simulation models were created for two different types of buildings in three different climatic zones in Palestine. The findings suggest that water heating, space heating, space cooling, and electric lighting are the highest energy consumers in ordinary houses. Level one measures resulted in a 19–24 percent decrease in energy consumption due to reduced heating and cooling loads. The use of a combination of levels one and two resulted in a decrease of energy consumption for heating, cooling, and lighting by 50–57%. The use of the three levels resulted in a decrease of 71–80% in total energy usage for heating, cooling, lighting, water heating, and air conditioning.

scholarly journals Energy Consumption in Residential Buildings: Comparison between Three Different Building Styles

2020 ◽  
Vol 2 (1) ◽  
pp. p1
Author(s):  
Mohamed A. Umbark ◽  
Samah Khalifa Alghoul ◽  
Elhadi I. Dekam
Keyword(s):  
Energy Consumption ◽  
Energy Savings ◽  
Residential Buildings ◽  
Weather Conditions ◽  
Electrical Energy ◽  
Local Power ◽  
Water Heating ◽  
Space Cooling ◽  
Heating Loads ◽  
Cooling Loads

More than one-third of the electricity generated in the world is being consumed in the residential sector. This study aims to model, simulate, and estimate electrical energy consumption in three different building styles. That is in order to compare and contrast energy consumption categories and their related social and architectural aspects for an unaddressed region that have its particular weather conditions and its special social and environmental aspects. The simulation is done by detailed modeling of the buildings using EnergyPlus. The results demonstrate that water heating systems account for almost one-fifth of the annual energy consumption. Cooling loads were found to be more than 5 times the heating loads. The peak of energy consumption was recorded to be in July, while the lowermost recorded in April and in November. The Apartment style requires the lowest annual energy consumption by an amount of 10 kWh/m2 per person followed by the Duplex house with 13 kWh/m2 per person, while the Single-Story house comes with the highest energy consumption of 18 kWh/m2 per person. These represent local power consumption of 69, 79, and 90 kWh/m2, respectively. On average, the water heating, space cooling, plus interior lights consume about 60% of total energy requirements with a mostly equal share for each, while the equipment has the maximum share of 35% of the total, leaving about 5% for the rest. The results of this study may be used as a reference line in the future for the calculations of energy savings in similar regions.

scholarly journals Humidity-Sensitive Demand-Controlled Ventilation Applied to Multi-Unit Residential Building – Performance and Energy Consumption in Dfb Continental Climate

2020 ◽  
Author(s):  
Jerzy Sowa ◽  
Maciej Mijakowski
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Ventilation System ◽  
Residential Building ◽  
Primary Energy ◽  
Controlled Ventilation ◽  
Demand Controlled Ventilation ◽  
Continental Climate

A humidity-sensitive demand-controlled ventilation system is known for many years. It has been developed and commonly applied in regions with an oceanic climate. Some attempts were made to introduce this solution in Poland in a much severe continental climate. The article evaluates this system's performance and energy consumption applied in an 8-floor multi-unit residential building, virtual reference building described by the National Energy Conservation Agency NAPE, Poland. The simulations using the computer program CONTAM were performed for the whole hating season for Warsaw's climate. Besides passive stack ventilation that worked as a reference, two versions of humidity-sensitive demand-controlled ventilation were checked. The difference between them lies in applying the additional roof fans that convert the system to hybrid. The study confirmed that the application of demand-controlled ventilation in multi-unit residential buildings in a continental climate with warm summer (Dfb) leads to significant energy savings. However, the efforts to ensure acceptable indoor air quality require hybrid ventilation, which reduces the energy benefits. It is especially visible when primary energy use is analyzed.

scholarly journals Thermochromic Paints on External Surfaces: Impact Assessment for a Residential Building through Thermal and Energy Simulation

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1912 ◽  
Author(s):  
Vasco Granadeiro ◽  
Margarida Almeida ◽  
Tiago Souto ◽  
Vítor Leal ◽  
João Machado ◽  
...  
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Cost Effective ◽  
Physical Models ◽  
Indoor Temperature ◽  
Heating And Cooling ◽  
Step Transition ◽  
Linear Manner

This work addresses the effect of using thermochromic paints in residential buildings. Two different thermochromic paint types were considered: One that changes properties through a step transition at a certain temperature, and another that changes properties in a gradual/linear manner throughout a temperature range. The studied building was a two-floor villa, virtually simulated through a digital model with and without thermal insulation, and considering thermochromic paints applied both on external walls and on the roof. The performance assessment was done through the energy use for heating and cooling (in conditioned mode), as well as in terms of the indoor temperature (in free-floating mode). Three different cities/climates were considered: Porto, Madrid, and Abu Dhabi. Results showed that energy savings up to 50.6% could be reached if the building is operated in conditioned mode. Conversely, when operated in free-floating mode, optimally selected thermochromic paints enable reductions up to 11.0 °C, during summertime, and an increase up to 2.7 °C, during wintertime. These results point out the great benefits of using optimally selected thermochromic paints for obtaining thermal comfort, and also the need to further develop stable and cost-effective thermochromic pigments for outdoor applications, as well as to test physical models in a real environment.

scholarly journals Towards climate resilient residential buildings: learning from traditional typologies

2021 ◽  
Vol 2042 (1) ◽  
pp. 012146
Author(s):  
D Mohaibesh ◽  
S Monna ◽  
H Qadi ◽  
R Sokkar
Keyword(s):  
Energy Consumption ◽  
Rural Areas ◽  
Architectural Design ◽  
Energy Savings ◽  
Residential Buildings ◽  
Vernacular Architecture ◽  
Residential Building ◽  
Design Strategies ◽  
Heating And Cooling ◽  
Proposed Model

Abstract Climate-resilient buildings in Palestine can play an important role in a more sustainable residential building sector. This paper aims at evaluating the effects of adopting architectural design strategies and material technologies from vernacular architecture to create a new climate-resilient building. The paper targets single houses as these represent the majority of residential buildings in suburban and rural areas, and are similar to the vernacular architecture in size and functionality. The EDSL Tas simulation tool was used to assess the thermal performance and energy savings in the proposed model compared with traditional houses and modern typical houses, in two different climatic zones. The proposed climate-resilient house has materials and design strategies derived from vernacular architecture, in addition to the use of thermal insulation. The results show that the proposed house is more climate-resilient compared to modern houses. In cold winter and hot summer climates, the proposed model presents a total annual heating and cooling energy consumption of 59% less than typical modern houses, and 5% more than old buildings. In hot arid summer and warm winter climates, the proposed house presents a total annual heating and cooling energy consumption of 58% less than a modern typical house and 8% more than the traditional house.

COMPARISON OF COOLING AND HEATING REQUIREMENTS BETWEEN BRICK VENEER AND FIBRO CEMENT WALLING SYSTEM

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Swapan Saha ◽  
Dharma Hagare ◽  
Jiaqi Zhou ◽  
Md Kamrul Hassan
Keyword(s):  
Energy Consumption ◽  
Energy Cost ◽  
Energy Use ◽  
Net Present Value ◽  
Space Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Brick Veneer ◽  
Save Energy ◽  
Modern House

Space cooling and heating in residential sector is significant contributor to energy consumption in Australia. Therefore, it is important to reduce the cooling and heating requirements. The selection of a good walling system helps to save energy by homes. This research compared the thermal efficiency of a modern house (constructed using brick veneer walls with concrete floor slab) with an old house (constructed using fibro cement walls raised timber floor) using the AccuRate simulation tool. A standard house with two living rooms, one kitchen, one laundry and four bedrooms are simulated in a Sydney Suburb in Australia. It was found that modern house showed lower inside temperature variation than the old house all year around. The results also showed that the modern house has a lower energy consumption for space heating and cooling than the old house. The annual energy use for space heating and cooling in both the modern house and old house were 5197 kWh and 15,712 kWh respectively. Moreover, the annual energy costs were found to be $1,403 and $4,242 respectively for modern and old houses. The modern brick veneer house saved about 33 % of energy compared to old old house. When the net present value of the energy cost for f both houses over 50 years is computed, the energy cost of modern house was found to be $25,629 while it of old house is was $77,488 for the old house.

Application of Water-Cooled Air-Conditioning for High-Rise Residential Buildings

2010 ◽  
Author(s):  
Hua Chen ◽  
Qianqian Di
Keyword(s):  
Energy Consumption ◽  
Empirical Model ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Operation Performance ◽  
Air Conditioners ◽  
High Rise ◽  
Set Up

To improve the applicability of water-cooled air-conditioners in the domestic sector, the development of a prediction model for energy performance analysis is needed. This paper addressed the development of an empirical model for predicting the operation performance and the annual energy consumption for the use of water-cooled air-conditioners. An experimental prototype was set up and tested in an environmental chamber in validating the empirical model. The predictions compared well with the experimental results. Furthermore, a high-rise residential building whole-year energy consumption simulation on applications of water-cooled air conditioners in South china was also analyzed. The results show 20.4% energy savings over air-cooled units while the increase in water-side consumption is 31.1%. The overall energy savings were estimated at 16.2% when including the additional water costs.

Designing a mediator space and the study of its effect on the energy consumption of a residential building using EnergyPlus software in Savadkuh, Iran

2019 ◽  
Vol 17 (4) ◽  
pp. 833-846
Author(s):  
Yasaman Yousefi ◽  
Mehdi Jahangiri ◽  
Akbar Alidadi Shamsabadi ◽  
Afshin Raeesi Dehkordi
Keyword(s):  
Energy Consumption ◽  
Design Methodology ◽  
Residential Building ◽  
Environmental Costs ◽  
Content Type ◽  
Design And Implementation ◽  
Heating And Cooling ◽  
Energy Simulations ◽  
Cooling Loads ◽  
Reducing Energy

Purpose Reducing energy consumption of a building may have a significant effect on the energy and environmental costs. Nowadays, energy simulations have come to the aid of engineers in the design and implementation of buildings with a perspective on energy consumption. Design/methodology/approach In the current study, the suggested volume of a residential building in the Savadkuh City, Iran, is modeled using Ecotect® software, and the amount of radiation on the sides during various months of the year is studied. Then, using EnergyPlus™ software, climate analyses are performed on the suggested design, and finally, the amount of heating and cooling loads of the building are examined under two difference scenarios of mediator space. Findings Results indicated that nearly at all times of the year, both the heating and cooling loads were reduced in the scenario where mediator space had two functions, i.e. as greenhouse and as a space for higher ventilation, compared to the scenario where mediator space did not have a climate role and merely served as an entrance and passageway with rigid dividers. Originality/value Nowadays, energy simulations have come to the aid of engineers in the design and implementation of buildings with a perspective on energy consumption. Therefore, in the current study, the suggested volume of a residential building in the Savadkuh City, Iran, is modeled using Ecotect® software, and the amount of radiation on the sides during various months of the year is studied. Then, using EnergyPlus™ software, climate analyses are performed on the suggested design, and finally, the amount of heating and cooling loads of the building are examined under two difference scenarios of mediator space.

scholarly journals Humidity-Sensitive, Demand-Controlled Ventilation Applied to Multiunit Residential Building—Performance and Energy Consumption in Dfb Continental Climate

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6669
Author(s):  
Jerzy Sowa ◽  
Maciej Mijakowski
Keyword(s):  
Energy Consumption ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Controlled Ventilation ◽  
Carbon Dioxide Concentrations ◽  
Demand Controlled Ventilation ◽  
Continental Climate ◽  
Ventilation Systems

Humidity-sensitive, demand-controlled ventilation systems have been in use for many years in regions with oceanic climates. Some attempts have been made to apply this technology in Poland, which has a continental climate. This article evaluates the performance and energy consumption of such a system when applied in an eight-floor, multiunit, residential building, i.e., the virtual reference building described by the National Energy Conservation Agency (NAPE), Poland. Simulations using the computer program CONTAM were performed for the whole heating season based upon the climate in Warsaw. Besides passive stack ventilation, that served as a reference, two ventilation systems were studied: one standard and one “hybrid” system with additional roof fans. This study confirmed that the application of humidity-sensitive, demand-controlled ventilation in multiunit residential buildings in a continental climate (Dfb) led to significant energy savings (up to 11.64 kWh/m2 of primary energy). However, the operation of the system on higher floors was found to be ineffective. Ensuring consistent operation of the system on all floors required supplementary fans. The introduction of a hybrid mode reduced carbon dioxide concentrations by approximately 32% in the units located in the upper part of the building. The energetic effect in such cases depends strongly on the electricity source. In the case of the national energy grid, savings of primary energy would be relatively low, i.e., 1.07 kWh/m2, but in the case of locally produced renewable energy, the energy savings would be equal to 5.18 kWh/m2.

A comparative meta-analysis of residential green building policies and their impact on overall energy consumption patterns

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Naim Jabbour
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Building ◽  
Green Building ◽  
Energy Performance ◽  
Residential Energy ◽  
Residential Energy Consumption ◽  
The Eu

Data shows residential energy consumption constituting a significant portion of the overall energy end use in the European Union (EU), ranging between 15% and 30%. Furthermore, the EU’s dependency on foreign fossil fuel-based energy imports has been steadily increasing since 1993, constituting approximately 60% of its primary energy. This paper provides an analytical re-view of diverse residential building/energy policies in targeted EU countries, to shed insight on the impact of such policies and measures on energy use and efficiency trends. Accordingly, the adoption of robust residential green and energy efficient building policies in the EU has increased in the past decade. Moreover, data from EU energy efficiency and consumption databases attributes 44% of total energy savings since 2000 to energy upgrades and improvements within the residential sector. Consequently, many EU countries and organizations are continuously evaluating residential building energy consumption patterns to increase the sec-tor’s overall energy performance. To that end, energy efficiency gains in EU households were measured at 1% in 2000 compared to 27.8% in 2016, a 2600% increase. Accordingly, 36 policies have been implemented successfully since 1991 across the EU targeting improvements in residential energy efficiency and reductions in energy use. Moreover, the adoption of National Energy Efficiency Actions Plans (NEEACP) across the EU have been a major driver of energy savings and energy efficiency. Most energy efficiency plans have followed a holistic multi-dimensional approach targeting the following areas, legislative actions, financial incentives, fiscal tax exemptions, and public education and awareness programs and campaigns. These measures and policy instruments have cumulatively generated significant energy savings and measurable improvements in energy performance across the EU since their inception. As a result, EU residential energy consumption trends show a consistent decrease over the past decade. The purpose of this analysis is to explore, examine, and compare the various green building and energy-related policies in the EU, highlighting some of the more robust and progressive aspects of such policies. The paper will also analyze the multiple policies and guidelines across targeted European nations. Lastly, the study will assess the status of green residential building policies in Lebanon, drawing from the comprehensive European measures, in order to recommend a comprehensive set of guidelines to advance energy policies and building practices in the country. Keywords: Building Policies; Residential Energy Patterns; Residential Energy Consumption; Energy Savings

scholarly journals Performance Evaluation of Two Machine Learning Techniques in Heating and Cooling Loads Forecasting of Residential Buildings

2020 ◽  
Vol 10 (11) ◽  
pp. 3829 ◽  
Author(s):  
Arash Moradzadeh ◽  
Amin Mansour-Saatloo ◽  
Behnam Mohammadi-Ivatloo ◽  
Amjad Anvari-Moghaddam
Keyword(s):  
Machine Learning ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Load Forecasting ◽  
Training Data ◽  
Support Vector ◽  
Cooling Load ◽  
Heating And Cooling ◽  
Cooling Loads ◽  
Heating And Cooling Load

Nowadays, since energy management of buildings contributes to the operation cost, many efforts are made to optimize the energy consumption of buildings. In addition, the most consumed energy in the buildings is assigned to the indoor heating and cooling comforts. In this regard, this paper proposes a heating and cooling load forecasting methodology, which by taking this methodology into the account energy consumption of the buildings can be optimized. Multilayer perceptron (MLP) and support vector regression (SVR) for the heating and cooling load forecasting of residential buildings are employed. MLP and SVR are the applications of artificial neural networks and machine learning, respectively. These methods commonly are used for modeling and regression and produce a linear mapping between input and output variables. Proposed methods are taught using training data pertaining to the characteristics of each sample in the dataset. To apply the proposed methods, a simulated dataset will be used, in which the technical parameters of the building are used as input variables and heating and cooling loads are selected as output variables for each network. Finally, the simulation and numerical results illustrates the effectiveness of the proposed methodologies.

Sign in / Sign up

Export Citation Format

Share Document