Remediation of Canada’s Historic Haul Route for Radium and Uranium Ores: The Northern Transportation Route

Author(s):  
Brian Geddes ◽  
Chris Wenzel ◽  
Michael Owen ◽  
Mark Gardiner ◽  
Julie Brown

Established in the 1930s, the Northern Transportation Route (NTR) served to transport pitchblende ore 2,200 km from the Port Radium Mine in Canada’s Northwest Territories to Fort McMurray in Alberta. From there, the ore was shipped 3,000 km by rail to the Town of Port Hope, Ontario, where it was refined for its radium content and used for medical purposes. Later, transport and refinement focussed on uranium. The corridor of lakes, rivers, portages and roads that made up the NTR included a number of transfer points, where ore was unloaded and transferred to other barges or trucks. Ore was occasionally spilled during these transfer operations and, in some cases, subsequently distributed over larger areas as properties were re-developed or modified. In addition, relatively small volumes of ore were sometimes transported by air to the south. Since 1991, the Low-Level Radioactive Waste Management Office (LLRWMO), working with communities and its consulting contractors, has conducted surveys to identify and characterize spill sites along the NTR where soils exhibit elevated concentrations of uranium, radium and/or arsenic. In addition to significant areas of impact in Fort McMurray, contamination along the NTR was centred in the Sahtu region near Great Bear Lake and along the southern part of the Slave River. Early radiological investigations found contaminated buildings and soil and occasionally discrete pieces of pitchblende ore at many transfer points and storage areas along the NTR. Where possible, survey work was undertaken in conjunction with property redevelopment activity requiring the relocation of impacted soils (e.g., at Tulita, Fort Smith, Hay River, and Fort McMurray). When feasible to consolidate contaminated material locally, it was placed into Long Term Management Facilities developed to manage and monitor the materials over extended timelines. Radiological activity generated by these engineered facilities are generally below thresholds established by Canadian regulators, meaning they are straightforward to maintain, with minor environmental and community impacts. Securing community acceptance for these facilities is critical, and represents the predominant development component of plans for managing ore-impacted soils. In those circumstances where local consolidation is not achievable, materials have been relocated to disposal facilities outside of the region. The LLRWMO is continuing a program of public consultation, technical evaluation and environmental assessment to develop management plans for the remaining ore-impacted sites on the NTR. This paper will highlight current activities and approaches applied for the responsible management of uranium and radium mining legacies.

Author(s):  
Ricardo Sánchez-Murillo

This study presents a hydrogeochemical analysis of spring responses (2013-2017) in the tropical mountainous region of the Central Valley of Costa Rica. The isotopic distribution of δ18O and δ2H in rainfall resulted in a highly significant meteoric water line: δ2H = 7.93×δ18O + 10.37 (r2=0.97). Rainfall isotope composition exhibited a strong dependent seasonality. The isotopic variation (δ18O) of two springs within the Barva aquifer was simulated using the FlowPC program to determine mean transit times (MTTs). Exponential-piston and dispersion distribution functions provided the best-fit to the observed isotopic composition at Flores and Sacramento springs, respectively. MTTs corresponded to 1.23±0.03 (Sacramento) and 1.42±0.04 (Flores) years. The greater MTT was represented by a homogeneous geochemical composition at Flores, whereas the smaller MTT at Sacramento is reflected in a more variable geochemical response. The results may be used to enhance modelling efforts in central Costa Rica, whereby scarcity of long-term data limits water resources management plans.


Author(s):  
O. Semenenko ◽  
O. Vodchyts ◽  
V. Koverga ◽  
R. Lukash ◽  
O. Lutsenko

The introduction and active use of information transmission and storage systems in the Ministry of Defense (MoD) of Ukraine form the need to develop ways of guaranteed removal of data from media after their use or long-term storage. Such a task is an essential component of the functioning of any information security system. The article analyzes the problems of guaranteed destruction of information on magnetic media. An overview of approaches to the guaranteed destruction of information on magnetic media of different types is presented, and partial estimates of the effectiveness of their application are given by some generally accepted indicators of performance evaluation. The article also describes the classification of methods of destruction of information depending on the influence on its medium. The results of the analysis revealed the main problems of application of software methods and methods of demagnetization of the information carrier. The issue of guaranteed destruction of information from modern SSD devices, which are actively used in the formation of new systems of information accumulation and processing, became particularly relevant in the article. In today's conditions of development of the Armed Forces of Ukraine, methods of mechanical and thermal destruction are more commonly used today. In the medium term, the vector of the use of information elimination methods will change towards the methods of physical impact by the pulsed magnetic field and the software methods that allow to store the information storage device, but this today requires specialists to develop new ways of protecting information in order to avoid its leakage.


Water Policy ◽  
2005 ◽  
Vol 7 (5) ◽  
pp. 469-483
Author(s):  
Tishya Chatterjee

In conditions of severe water-pollution and dormant community acceptance of accumulating environmental damage, the regulator's role goes beyond pollution prevention and more towards remediation and solutions based on the community's long-term expectations of economic benefits from clean water. This paper suggests a method to enable these benefits to become perceptible progressively, through participatory clean-up operations, supported by staggered pollution charges. It analyses the relevant literature on pollution prevention and applies a cost-based “willingness to pay” model, using primary basin-level data of total marginal costs. It develops a replicable demand-side approach imposing charge-standard targets over time in urban-industrial basins of developing countries.


Author(s):  
Miriam Mack ◽  
Patrick Dittmer ◽  
Marius Veigt ◽  
Mehmet Kus ◽  
Ulfert Nehmiz ◽  
...  

The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production.


Author(s):  
W ZHOU ◽  
M STENHOUSE ◽  
R ARTHUR ◽  
S WHITTAKER ◽  
D LAW ◽  
...  
Keyword(s):  

Author(s):  
Paul L. Joskow

Abstract Electric power sectors around the world have changed dramatically in the last 25 years as a result of sector liberalization policies. Many electricity sectors are now pursuing deep decarbonization goals which will entail replacing dispatchable fossil generation primarily with intermittent renewable generation (wind and solar) over the next 20–30 years. This transition creates new challenges for both short-term wholesale market design and investment incentives consistent with achieving both decarbonization commitments and security of supply criteria. Thinking broadly about the options for institutional change from a Williamsonian perspective – thinking like Williamson – provides a useful framework for examining institutional adaptation. Hybrid markets that combine ‘competition for the market’ that relies on competitive procurement for long-term purchased power agreements with wind, solar, and storage developers, ideally in a technology neutral fashion, and ‘competition in the market’ that relies on short-term markets designed to produce efficient and reliable operations of intermittent generation and storage, is identified as a promising direction for institutional adaptation. Many auction, contract, and market integration issues remain to be resolved.


Author(s):  
Rinzo Kayano ◽  
Masamitsu Abe ◽  
Yukio Hirai

It has been recognized that repair welding plays an important role in the long term, safe operation of pressure equipment. In 2009, The Japan Welding Society (JWES) published guidelines for repair welding of pressure equipment [1], to meet the great need for the safe operation and proper maintenance of aging plants. Pressure equipments made from carbon steel, high tensile steel and Cr-Mo steels are utilized for high pressure services. The subject equipments are pressure vessels, heat exchangers, piping, and storage tanks for petroleum, petrochemical and liquefied natural gas industry. This paper summarizes category and property of these steels and repair welding method including special attention. Especially, weld cold cracking for these steels could be prevented by controlling the repair welding and post-weld heat treatment process to reduce the hydrogen content, hardness and weld residual stress.


Sign in / Sign up

Export Citation Format

Share Document