Method for Joint Configuration of Nuclear Power Plant Fuel Elements/Assemblies

2013 ◽  
Author(s):  
Zirong Ma ◽  
Lihong Nie ◽  
Yulong Mao
Keyword(s):  
Power Plant ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Reactor Core ◽  
Configuration Design ◽  
Joint Configuration ◽  
Fuel Assemblies ◽  
Reactor Cores ◽  
Fuel Elements ◽  
Operating Units

The method is about a design for nuclear fuel elements/assemblies configuration conducted jointly by several units with interchangeable fuel elements/assemblies. The first core of the new units may totally use the fuel elements/assemblies with relatively high enrichments which are identical or equivalent to the equilibrium cycle enrichments. Wherein, a part of new fuel elements/assemblies with relatively high enrichments may be put into one or more operating units for combustion, such that the new fuel elements/assemblies loaded in the operating units is much more than when such method is not implemented, and then considerable more once burned fuel elements/assemblies are obtained. Meanwhile, considerable twice burned fuel elements/assemblies may be provided by the operating units additionally (taking the reactor core with 157 fuel assemblies refueling every 18 months for example). From the considerable obtained once and twice burned fuel elements/assemblies, the burned fuel elements/assemblies with the desired quantity and burnup may be selected to construct the first reactor cores of the new units together with new fuel elements/assemblies with relatively high enrichments. After the method for joint configuration design of nuclear fuel elements/assemblies has been implemented, the average discharge burnup of the operating units added with more new fuel elements/assemblies and the first reactor cores of the new units is higher than that of the equilibrium cycle.

Research for Crossing Strait Transportation Accident of Nuclear Fuel Assemblies

2013 ◽  
Author(s):  
Xiaoxiao Xu ◽  
Xuexin Wang ◽  
Jiangang Zhang ◽  
Chaoduan Li ◽  
Gao Fan ◽  
...  
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Hainan Island ◽  
Radioactive Material ◽  
Sea Transport ◽  
Fuel Assemblies ◽  
Qiongzhou Strait ◽  
Transport Accidents

Hainan nuclear power plant (HNPP) is the first nuclear power plant built on China’s Hainan Island. Therefore the nuclear fuel assemblies must transport through the Qiongzhou Strait. There are two transportation plans to be used in crossing strait transportation of the fuel assemblies. One plan is railway ferry stretching across sea; the other is road vehicular crossing strait on roll-on/roll-off (Ro/Ro) ships. According to crossing strait transportation scenario and statistical analysis of sea transport accidents in Qiongzhou Strait, three ferrying transportation accidents are considered in this paper. Through research of ship-to-ship collision, fire and sunk, the following conclusions: Collision, fire or foundered are not caused by the leakage of radioactive material, the environmental impact is very small. The accident hazards of crossing strait transportation does not lie in the radiological consequences, but in the effects of public psychology and international repercussions.

scholarly journals Antineutrino Flux from the Laguna Verde Nuclear Power Plant

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Marisol Chavez-Estrada ◽  
Alexis A. Aguilar-Arevalo
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Plastic Scintillator ◽  
Reactor Core ◽  
Simulation Code ◽  
Fission Fragments ◽  
Antineutrino Flux ◽  
Laguna Verde ◽  
Reactor Cores

We present a calculation of the antineutrino flux produced by the reactors at the Laguna Verde Nuclear Power Plant in México, based on the antineutrino spectra produced in the decay chains of the fission fragments of the main isotopes in the reactor core, and their fission rates, which have been calculated using the DRAGON simulation code. We also present an estimate of the number of expected events in a detector made of plastic scintillator with a mass of 1 ton, at 100 m from the reactor cores.

scholarly journals Application of Evolutionary Simulated Annealing Method to Design a Small 200 MWt Reactor Core

2021 ◽  
Vol 10 (4) ◽  
pp. 16-23
Author(s):  
Tran Viet Phu ◽  
Tran Hoai Nam ◽  
Hoang Van Khanh
Keyword(s):  
Simulated Annealing ◽  
Power Plant ◽  
Nuclear Power ◽  
Cycle Length ◽  
Reactor Core ◽  
Loading Pattern ◽  
The Core ◽  
Fuel Assemblies ◽  
Full Power ◽  
Annealing Method

This paper presents the application of an evolutionary simulated annealing (ESA) method to design a small 200 MWt reactor core. The core design is based on a reference ACPR50 reactor deployed in a floating nuclear power plant. The core consists of 37 typical 17x17 PWR fuel assemblies with three different U-235 enrichments of 4.45, 3.40 and 2.35 wt%. Core loading pattern (LP) has been optimized for obtaining the cycle length of 900 effective full power days, while minimizing the average U-235 enrichment and the radial power peaking factor. The optimization process was performed by coupling the ESA method with the COREBN module of the SRAC2006 system code.

scholarly journals Online Simulation of Nuclear Power Plant Primary Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Hongyun Xie ◽  
Haixia Gu ◽  
Chao Lu ◽  
Jialin Ping
Keyword(s):  
Information System ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Real Time ◽  
Nuclear Power ◽  
Measurement Data ◽  
Reactor Core ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Online Simulation

Real-time Simulation (RTS) has long been used in the nuclear power industry for operator training and engineering purposes. And, online simulation (OLS) is based on RTS and with connection to the plant information system to acquire the measurement data in real time for calibrating the simulation models and following plant operation, for the purpose of analyzing plant events and providing indicative signs of malfunctioning. OLS has been applied in certain industries to improve safety and efficiency. However, it is new to the nuclear power industry. A research project was initiated to implement OLS to assist operators in certain critical nuclear power plant (NPP) operations to avoid faulty conditions. OLS models were developed to simulate the reactor core physics and reactor/steam generator thermal hydraulics in real time, with boundary conditions acquired from plant information system, synchronized in real time. The OLS models then were running in parallel with recorded plant events to validate the models, and the results are presented.

scholarly journals Reactor Core Conceptual Design for a Scalable Heating Experimental Reactor, LUTHER

2021 ◽  
Vol 2 (2) ◽  
pp. 207-214
Author(s):  
Thinh Truong ◽  
Heikki Suikkanen ◽  
Juhani Hyvärinen
Keyword(s):  
Low Temperature ◽  
Conceptual Design ◽  
Nuclear Power ◽  
Water Pressure ◽  
Reactor Core ◽  
Electricity Production ◽  
Design Parameters ◽  
Experimental Reactor ◽  
Fuel Assemblies ◽  
Enriched Uranium

In this paper, the conceptual design and a preliminary study of the LUT Heating Experimental Reactor (LUTHER) for 2 MWth power are presented. Additionally, commercially sized designs for 24 MWth and 120 MWth powers are briefly discussed. LUTHER is a scalable light-water pressure-channel reactor designed to operate at low temperature, low pressure, and low core power density. The LUTHER core utilizes low enriched uranium (LEU) to produce low-temperature output, targeting the district heating demand in Finland. Nuclear power needs to contribute to the decarbonizing of the heating and cooling sector, which is a much more significant greenhouse gas emitter than electricity production in the Nordic countries. The main principle in the development of LUTHER is to simplify the core design and safety systems, which, along with using commercially available reactor components, would lead to lower fabrication costs and enhanced safety. LUTHER also features a unique design with movable individual fuel assembly for reactivity control and burnup compensation. Two-dimensional (2D) and three-dimensional (3D) fuel assemblies and reactor cores are modeled with the Serpent Monte Carlo reactor physics code. Different reactor design parameters and safety configurations are explored and assessed. The preliminary results show an optimal basic core design, a good neutronic performance, and the feasibility of controlling reactivity by moving fuel assemblies.

A High Effective Parallel Method for the Coupling Between Neutronics and Thermal-Hydraulic

2016 ◽  
Author(s):  
Xiaomeng Dong ◽  
Zhijian Zhang ◽  
Zhaofei Tian ◽  
Lei Li ◽  
Guangliang Chen
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Decisive Role ◽  
Reactor Power ◽  
Coupling Method ◽  
Outlet Temperature

Multi-physics coupling analysis is one of the most important fields among the analysis of nuclear power plant. The basis of multi-physics coupling is the coupling between neutronics and thermal-hydraulic because it plays a decisive role in the computation of reactor power, outlet temperature of the reactor core and pressure of vessel, which determines the economy and security of the nuclear power plant. This paper develops a coupling method which uses OPENFOAM and the REMARK code. OPENFOAM is a 3-dimension CFD open-source code for thermal-hydraulic, and the REMARK code (produced by GSE Systems) is a real-time simulation multi-group core model for neutronics while it solves diffusion equations. Additionally, a coupled computation using these two codes is new and has not been done. The method is tested and verified using data of the QINSHAN Phase II typical nuclear reactor which will have 16 × 121 elements. The coupled code has been modified to adapt unlimited CPUs after parallelization. With the further development and additional testing, this coupling method has the potential to extend to a more large-scale and accurate computation.

scholarly journals Small nuclear power plants for power supply in arctic regions: assessment of spent nuclear fuel radioactivity

2018 ◽  
Vol 4 (2) ◽  
pp. 119-125
Author(s):  
Vadim Naumov ◽  
Sergey Gusak ◽  
Andrey Naumov
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Mass Composition ◽  
Published Data ◽  
Pressurized Water ◽  
Fuel Cycles ◽  
Reactor Cores

The purpose of the present study is the investigation of mass composition of long-lived radionuclides accumulated in the fuel cycle of small nuclear power plants (SNPP) as well as long-lived radioactivity of spent fuel of such reactors. Analysis was performed of the published data on the projects of SNPP with pressurized water-cooled reactors (LWR) and reactors cooled with Pb-Bi eutectics (SVBR). Information was obtained on the parameters of fuel cycle, design and materials of reactor cores, thermodynamic characteristics of coolants of the primary cooling circuit for reactor facilities of different types. Mathematical models of fuel cycles of the cores of reactors of ABV, KLT-40S, RITM-200M, UNITERM, SVBR-10 and SVBR-100 types were developed. The KRATER software was applied for mathematical modeling of the fuel cycles where spatial-energy distribution of neutron flux density is determined within multi-group diffusion approximation and heterogeneity of reactor cores is taken into account using albedo method within the reactor cell model. Calculation studies of kinetics of burnup of isotopes in the initial fuel load (235U, 238U) and accumulation of long-lived fission products (85Kr, 90Sr, 137Cs, 151Sm) and actinoids (238,239,240,241,242Pu, 236U, 237Np, 241Am, 244Cm) in the cores of the examined SNPP reactor facilities were performed. The obtained information allowed estimating radiation characteristics of irradiated nuclear fuel and implementing comparison of long-lived radioactivity of spent reactor fuel of the SNPPs under study and of their prototypes (nuclear propulsion reactors). The comparison performed allowed formulating the conclusion on the possibility in principle (from the viewpoint of radiation safety) of application of SNF handling technology used in prototype reactors in the transportation and technological process layouts of handling SNF of SNPP reactors.

The Analysis and Realization of Interpreter Language in Nuclear Industry

2014 ◽  
Vol 989-994 ◽  
pp. 2097-2100
Author(s):  
Zheng Zhang ◽  
Hai Bo He ◽  
Hao Liang Lu
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Semantic Analysis ◽  
Reactor Core ◽  
Nuclear Industry ◽  
Logical Language ◽  
Grammatical Analysis ◽  
Actual Operating ◽  
Comparison Results

In order to satisfy the calculation requirements of nuclear power plant operating in different conditions, the integration and combination of reactor core computation modules have been proposed. By writing logical language instructions, and then read by interpreter, the engineering designers can make grammatical analysis, lexical analysis, semantic analysis and information extraction. In Linux system environment, the interpreter can fulfill computational tasks based on the actual operating parameters of nuclear power plant. The comparison results indicate that the calculated results obtained by the interpreter language are correct. Therefore, it also demonstrates that the interpreter language is valid.

Model of a Dry Storage Facility for a Medium Nuclear Power Plant

2001 ◽  
Author(s):  
Mile Bace ◽  
Kresimir Trontl ◽  
Dubravko Pevec
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Radiation Dose ◽  
Dose Rate ◽  
Nuclear Power ◽  
Storage Facility ◽  
Spent Fuel ◽  
Radiation Dose Rate ◽  
Dry Storage ◽  
Fuel Assemblies

Abstract The intention was to model a dry storage facility that could satisfy the needs of a medium nuclear power plant similar to the NPP Krsko. The attention has been focused on radiation dose rate analyses and criticality calculations. Using the SCALE 4.4 code package and modified QAD-CGGP code, we modeled a facility that satisfies the basic criteria for public radiation protection. The capacity of the storage is 1,400 spent fuel assemblies which is adequate for a forty years medium NPP lifetime.

Sign in / Sign up

Export Citation Format

Share Document