Sensitivity Analysis of a Biomass Fired Stirling Engine Combined Cooling, Heating, and Power System for a Small Office Building

2010 ◽  
Author(s):  
James C. Harrod ◽  
Pedro J. Mago
Keyword(s):  
Power Generation ◽  
Sensitivity Analysis ◽  
Heat Exchangers ◽  
Primary Energy ◽  
Stirling Engine ◽  
Alternative Methods ◽  
Prime Mover ◽  
Operational Cost ◽  
Combined Cooling ◽  
Engine Size

Over the past decade, rising energy demand and cost have created a surge of interest in alternative methods of power generation. As a result, the implementation of combined cooling, heating, and power (CCHP) systems has become a potential candidate for substitution in conventional power generation. The evaluation of a CCHP system must be based on its potential for savings in cost and primary energy reduction. In general, a CCHP system includes several components to satisfy the electric and thermal demands of the facility. These components include the prime mover, heat recovery system, auxiliary boiler, absorption chiller, heating coil unit, and hot water system unit. In practice, the most common prime mover used in CCHP technology is the internal combustion engine, which is limited by low thermal efficiency and poor emissions. Hence, this paper proposes the use of a Stirling engine prime mover that makes use of waste wood chips for fuel. In addition to the standard CCHP components, the Stirling engine houses heat exchangers to aid heat addition and rejection processes. These heat exchangers must be considered along with the other components when analyzing energy requirements. The goal of this study is to determine how the operational characteristics of a constant output biomass-fired Stirling CCHP system are affected by the performance of the individual CCHP system components. The results of this sensitivity analysis are useful in determining the most important parameters to be considered when implementing and designing the system. Results suggest that fuel cost, engine efficiency, engine size, chiller efficiency, and the Stirling engine’s hot side heat exchanger play the most important roles in the CCHP system operational cost. For example, the results show that increasing the engine size leads to increases in primary energy. In addition, an optimum engine size is suggested for cost savings, with smaller and larger engines both leading to increases in operational cost.

Performance analysis of a combined cooling, heating, and power system driven by a waste biomass fired Stirling engine

2010 ◽  
Vol 225 (2) ◽  
pp. 420-428 ◽  
Author(s):  
J Harrod ◽  
P J Mago
Keyword(s):  
Energy Consumption ◽  
Natural Gas ◽  
Wood Chip ◽  
Primary Energy ◽  
Stirling Engine ◽  
Primary Energy Consumption ◽  
Operational Cost ◽  
Excess Production ◽  
Prime Movers ◽  
Combined Cooling

Due to the soaring costs and demand of energy in recent years, combined cooling, heating, and power (CCHP) systems have arisen as an alternative to conventional power generation based on their potential to provide reductions in cost, primary energy consumption, and emissions. However, the application of these systems is commonly limited to internal combustion engine prime movers that use natural gas as the primary fuel source. Investigation of more efficient prime movers and renewable fuel applications is an integral part of improving CCHP technology. Therefore, the objective of this study is to analyse the performance of a CCHP system driven by a biomass fired Stirling engine. The study is carried out by considering an hour-by-hour CCHP simulation for a small office building located in Atlanta, Georgia. The hourly thermal and electrical demands for the building were obtained using the EnergyPlus software. Results for burning waste wood chip biomass are compared to results obtained burning natural gas to illustrate the effects of fuel choice and prime mover power output on the overall CCHP system performance. Based on the specified utility rates and including excess production buyback, the results suggest that fuel prices of less than $23/MWh must be maintained for savings in cost compared to the conventional case. In addition, the performance of the CCHP system using the Stirling engine is compared with the conventional system performance. This comparison is based on operational cost and primary energy consumption. When electricity can be sold back to the grid, results indicate that a wood chip fired system yields a potential cost savings of up to 50 per cent and a 20 per cent increase in primary energy consumption as compared with the conventional system. On the other hand, a natural gas fired system is shown to be ineffective for cost and primary energy consumption savings with increases of up to 85 per cent and 24 per cent compared to the conventional case, respectively. The variations in the operational cost and primary energy consumption are also shown to be sensitive to the electricity excess production and buyback rate.

Conceptual and Basic Design of a Stirling Engine Prototype for Electrical Power Generation by Solar Means

2010 ◽  
Author(s):  
Constantino Roldan ◽  
Pedro Pieretti ◽  
Luis Rojas Solorzano
Keyword(s):  
Power Generation ◽  
Solar Radiation ◽  
Heat Exchangers ◽  
Solar Collector ◽  
Electrical Power ◽  
Electric Energy ◽  
Stirling Engine ◽  
Basic Design ◽  
Analysis Methods ◽  
Complex Phenomena

The research consisted in a conceptual and basic design of a prototype Stirling engine with the purpose of taking advantage of the solar radiation to produce electric energy. The work began with a bibliography review covering aspects as history, basic functioning, design configurations, applications and analysis methods, just to continue with the conceptual design, where the prototype specifications are determined. Finally, a basic dimensioning of the important components as heat exchangers (heater, cooler, and regenerator), piston, displacer and solar collector was elaborated. The principal conclusions were that the different analysis methods had dissimilitude between the results, in this sense, a construction of the prototype is necessary for the understanding of the complex phenomena occurring inside the engine.

scholarly journals Experimental and Numerical Study of a Microcogeneration Stirling Unit under On–Off Cycling Operation

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 801
Author(s):  
Gianluca Valenti ◽  
Aldo Bischi ◽  
Stefano Campanari ◽  
Paolo Silva ◽  
Antonino Ravidà ◽  
...  
Keyword(s):  
Numerical Study ◽  
Thermal Storage ◽  
Primary Energy ◽  
Operational Cost ◽  
Cogeneration Plant ◽  
Economic Optimization ◽  
Viable Option ◽  
Heating Value ◽  
Energy Flows

Stirling units are a viable option for micro-cogeneration applications, but they operate often with multiple daily startups and shutdowns due to the variability of load profiles. This work focused on the experimental and numerical study of a small-size commercial Stirling unit when subjected to cycling operations. First, experimental data about energy flows and emissions were collected during on–off operations. Second, these data were utilized to tune an in-house code for the economic optimization of cogeneration plant scheduling. Lastly, the tuned code was applied to a case study of a residential flat in Northern Italy during a typical winter day to investigate the optimal scheduling of the Stirling unit equipped with a thermal storage tank of diverse sizes. Experimentally, the Stirling unit showed an integrated electric efficiency of 8.9% (8.0%) and thermal efficiency of 91.0% (82.2%), referred to as the fuel lower and, between parenthesis, higher heating value during the on–off cycling test, while emissions showed peaks in NOx and CO up to 100 ppm but shorter than a minute. Numerically, predictions indicated that considering the on–off effects, the optimized operating strategy led to a great reduction of daily startups, with a number lower than 10 per day due to an optimal thermal storage size of 4 kWh. Ultimately, the primary energy saving was 12% and the daily operational cost was 2.9 €/day.

scholarly journals Decarbonization of Residential Building Energy Supply: Impact of Cogeneration System Performance on Energy, Environment, and Economics

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2538
Author(s):  
Praveen K. Cheekatamarla
Keyword(s):  
Carbon Dioxide ◽  
Power Generation ◽  
Energy Consumption ◽  
Carbon Footprint ◽  
Residential Buildings ◽  
Building Energy ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Cogeneration System ◽  
The Impact

Electrical and thermal loads of residential buildings present a unique opportunity for onsite power generation, and concomitant thermal energy generation, storage, and utilization, to decrease primary energy consumption and carbon dioxide intensity. This approach also improves resiliency and ability to address peak load burden effectively. Demand response programs and grid-interactive buildings are also essential to meet the energy needs of the 21st century while addressing climate impact. Given the significance of the scale of building energy consumption, this study investigates how cogeneration systems influence the primary energy consumption and carbon footprint in residential buildings. The impact of onsite power generation capacity, its electrical and thermal efficiency, and its cost, on total primary energy consumption, equivalent carbon dioxide emissions, operating expenditure, and, most importantly, thermal and electrical energy balance, is presented. The conditions at which a cogeneration approach loses its advantage as an energy efficient residential resource are identified as a function of electrical grid’s carbon footprint and primary energy efficiency. Compared to a heat pump heating system with a coefficient of performance (COP) of three, a 0.5 kW cogeneration system with 40% electrical efficiency is shown to lose its environmental benefit if the electrical grid’s carbon dioxide intensity falls below 0.4 kg CO2 per kWh electricity.

Energy, exergy, environmental, and economic modeling of combined cooling, heating and power system with Stirling engine and absorption chiller

2019 ◽  
Vol 180 ◽  
pp. 183-195 ◽  
Author(s):  
Mohammad Sheykhi ◽  
Mahmood Chahartaghi ◽  
Mohammad Mahdi Balakheli ◽  
Behrad Alizadeh Kharkeshi ◽  
Seyyed Mahdi Miri
Keyword(s):  
Power System ◽  
Economic Modeling ◽  
Stirling Engine ◽  
Absorption Chiller ◽  
Combined Cooling

scholarly journals Multi-Country Analysis on Energy Savings in Buildings by Means of a Micro-Solar Organic Rankine Cycle System: A Simulation Study

Environments ◽  
2018 ◽  
Vol 5 (11) ◽  
pp. 119 ◽  
Author(s):  
Alessia Arteconi ◽  
Luca Del Zotto ◽  
Roberto Tascioni ◽  
Khamid Mahkamov ◽  
Chris Underwood ◽  
...  
Keyword(s):  
Thermal Energy ◽  
Energy Demand ◽  
Energy Use ◽  
Energy Savings ◽  
Organic Rankine Cycle ◽  
Cost Savings ◽  
Rankine Cycle ◽  
Primary Energy ◽  
Operational Cost ◽  
The North

In this paper, the smart management of buildings energy use by means of an innovative renewable micro-cogeneration system is investigated. The system consists of a concentrated linear Fresnel reflectors solar field coupled with a phase change material thermal energy storage tank and a 2 kWe/18 kWth organic Rankine cycle (ORC) system. The microsolar ORC was designed to supply both electricity and thermal energy demand to residential dwellings to reduce their primary energy use. In this analysis, the achievable energy and operational cost savings through the proposed plant with respect to traditional technologies (i.e., condensing boilers and electricity grid) were assessed by means of simulations. The influence of the climate and latitude of the installation was taken into account to assess the performance and the potential of such system across Europe and specifically in Spain, Italy, France, Germany, U.K., and Sweden. Results show that the proposed plant can satisfy about 80% of the overall energy demand of a 100 m2 dwelling in southern Europe, while the energy demand coverage drops to 34% in the worst scenario in northern Europe. The corresponding operational cost savings amount to 87% for a dwelling in the south and at 33% for one in the north.

Sign in / Sign up

Export Citation Format

Share Document