Microbubble Array as a Versatile Tool for On-Chip Worm Processing

Author(s):  
Gan Yu ◽  
Ali Hashmi ◽  
Yuhao Xu ◽  
Hyuck-Jin Kwon ◽  
Xiaolin Chen ◽  
...  

In this study, we present a novel technique for achieving precise trapping, enrichment and manipulation of C. elegans using an array of oscillating microbubbles in a simple microfluidic device. We demonstrate a high trapping efficiency and enrichment of C. elegans characterized by the flow conditions. We also demonstrate for the first time an on-chip manipulation of the pathways of a single C. elegans through temporal actuation of bubbles.

2021 ◽  
Author(s):  
Simon Berger ◽  
Silvan Spiri ◽  
Andrew deMello ◽  
Alex Hajnal

Several microfluidic-based methods for long-term C. elegans imaging have been introduced in recent years, allowing real-time observation of previously inaccessible processes. The ex-isting methods either permit imaging across multiple larval stages without maintaining a stable worm orientation, or allow for very good immobilization but are only suitable for shorter experiments. Here, we present a novel microfluidic imaging method, which allows parallel live-imaging across multiple larval stages, while delivering excellent immobilization and maintaining worm orientation and identity over time. This is achieved by employing an array of microfluidic trap channels carefully tuned to maintain worms in a stable orienta-tion, while allowing growth and molting to occur. Immobilization is supported by an active hydraulic valve, which presses worms onto the cover glass during image acquisition, with the animals remaining free for most of an experiment. Excellent quality images can be ac-quired of multiple worms in parallel, with little impact of the imaging method on worm via-bility or developmental timing. The capabilities of this methodology are demonstrated by observing the hypodermal seam cell divisions and, for the first time, the entire process of vulval development from induction to the end of morphogenesis. Moreover, we demonstrate RNAi on-chip, which allows for perturbation of dynamic developmental processes, such as basement membrane breaching during anchor cell invasion.


Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 840 ◽  
Author(s):  
Tao Yue ◽  
Na Liu ◽  
Yuanyuan Liu ◽  
Yan Peng ◽  
Shaorong Xie ◽  
...  

Multilayered and multicellular structures are indispensable for constructing functional artificial tissues. Engineered vascular-like microstructures with multiple layers are promising structures to be functionalized as artificial blood vessels. In this paper, we present an efficient method to construct multilayer microtubes embedding different microstructures based on direct fabrication and assembly inside a microfluidic device. This four-layer microfluidic device has two separate inlets for fabricating various microstructures. We have achieved alternating-layered microtubes by controlling the fabrication, flow, and assembly time of each microstructure, and as well, double-layered microtubes have been built by a two-step assembly method. Modifications of both the inner and outer layers was successfully demonstrated, and the flow conditions during the on-chip assembly were evaluated and optimized. Each microtube was successfully constructed within several minutes, showing the potential applications of the presented method for building engineered vascular-like microstructures with high efficiency.


2021 ◽  
Author(s):  
Amirmohammad Sattari ◽  
Sajad Janfaza ◽  
Mohsen Mashhadi Keshtiban ◽  
Nishat Tasnim ◽  
Pedram Hanafizadeh ◽  
...  

Abstract Microfluidic on-chip production of microgels employing external gelation has numerous biological and pharmaceutical applications, particularly for the encapsulation of delicate cargos, however, the on-chip production of microgels in microfluidic devices can be challenging due to problems such as clogging caused by accelerated progress in precursor solution viscosity. Here, we introduce a novel microfluidic design incorporating two consecutive co-flow geometries for microfluidic droplet generation. A shielding oil phase is employed to avoid emulsification and gelation stages from occurring simultaneously, thereby preventing clogging. The results revealed that the microfluidic device could generate highly monodispersed spherical droplets (coefficient of variation < 3%) with an average diameter in the range of 60–200 μm. Additionally, it was demonstrated that the device could appropriately create a shelter of the oil phase around the inner aqueous phase regardless of the droplet formation regime and flow conditions. The ability of the proposed microfluidic device in the generation of microgels was validated by producing alginate microgels utilizing an aqueous solution of calcium chloride as the continuous phase.


Lab on a Chip ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 155-167 ◽  
Author(s):  
Huseyin Baris Atakan ◽  
Furkan Ayhan ◽  
Martin A. M. Gijs

We present a microfluidic device for rapid larvae sorting and on-chip egg extraction of C. elegans at high purity and high throughput.


Development ◽  
2021 ◽  
Author(s):  
Simon Berger ◽  
Silvan Spiri ◽  
Andrew deMello ◽  
Alex Hajnal

Several microfluidic-based methods for C. elegans imaging have recently been introduced. Existing methods either permit imaging across multiple larval stages without maintaining a stable worm orientation, or allow for very good immobilization but are only suitable for shorter experiments. Here, we present a novel microfluidic imaging method, which allows parallel live-imaging across multiple larval stages, while maintaining worm orientation and identity over time. This is achieved through an array of microfluidic trap channels carefully tuned to maintain worms in a stable orientation, while allowing growth and molting to occur. Immobilization is supported by an active hydraulic valve, which presses worms onto the cover glass during image acquisition only. In this way, excellent quality images can be acquired with minimal impact on worm viability or developmental timing. The capabilities of the devices are demonstrated by observing the hypodermal seam and P cell divisions and, for the first time, the entire process of vulval development from induction to the end of morphogenesis. Moreover, we demonstrate feasibility of on-chip RNAi by perturbing basement membrane breaching during anchor cell invasion.


Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.


eNeuro ◽  
2021 ◽  
pp. ENEURO.0360-20.2021
Author(s):  
Sudip Mondal ◽  
Jyoti Dubey ◽  
Anjali Awasthi ◽  
Guruprasad Reddy Sure ◽  
Amruta Vasudevan ◽  
...  

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Ruijin Wang

Manipulation and sorting of particles utilizing microfluidic phenomena have been a hot spot in recent years. Here, we present numerical investigations on particle trapping techniques by using intrinsic hydrodynamic effects in an expansion-contraction microfluidic device. One emphasis is on the underlying fluid dynamical mechanisms causing cross-streamlines migration of the particles in shear and vortical flows. The results show us that the expansion-contraction geometric structure is beneficial to particle trapping according to its size. Particle Reynolds number and aspect ratio of the channel will influence the trapping efficiency greatly because the force balance between inertial lift and vortex drag forces is the intrinsic reason. Especially, obvious inline particles contribution presented when the particle Reynolds number being unit. In addition, we selected three particle sizes (2, 7, and 15 μm) to examine the trapping efficiency.


2012 ◽  
Vol 6 (4) ◽  
pp. 044101 ◽  
Author(s):  
Linda Desbois ◽  
Adrien Padirac ◽  
Shohei Kaneda ◽  
Anthony J. Genot ◽  
Yannick Rondelez ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document