Thermodynamic Assessment of Hybrid PSOFC/GT Systems for Mechanical/Electric Power Generation

2000 ◽  
Author(s):  
K. K. Botros ◽  
G. R. Price ◽  
R. Parker
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Gas Turbine ◽  
Life Cycle Cost ◽  
Pressure Ratio ◽  
Pollutant Emissions ◽  
Mechanical Power ◽  
Total Power ◽  
Specific Work ◽  
System Pressure

Hybrid PSOFC/GT cycles consisting of pressurized solid oxide fuel cells integrated into gas turbine cycles are emerging as a major new power generation concept. These hybrid cycles can potentially offer thermal efficiencies exceeding 70% along with significant reductions in greenhouse gas and NOX emissions. This paper considers the PSOFC/GT cycle in terms of electrical and mechanical power generation with particular focus on gas pipeline companies interested in diversifying their assets into distributed electric generation or lowering pollutant emissions while more efficiently transporting natural gas. By replacing the conventional GT combustion chamber with an internally reformed PSOFC, electrical power is generated as a by-product while hot gases exiting the fuel cell are diverted into the gas turbine for mechanical power. A simple one-dimensional thermodynamic model of a generic PSOFC/GT cycle has shown that overall thermal efficiencies of 65% are attainable, whilst almost tripling the specific work (i.e. energy per unit mass of air). The main finding of this paper is that the amount of electric power generated ranges from 60–80% of the total power available depending on factors such as the system pressure ratio and degree of supplementary firing before the gas turbine. Ultimately, the best cycle should be based on the “balance of plant”, which considers factors such as life cycle cost analysis, business and market focus, and environmental emission issues.

The Effect of Size on Optimisation of Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycles

2009 ◽  
Author(s):  
Michael J. Brear ◽  
Michael J. Dunkley
Keyword(s):  
Fuel Cell ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Solid Oxide ◽  
Total Power ◽  
Oxide Fuel ◽  
Component Size ◽  
System Pressure

The integration of high temperature solid oxide fuel cells with gas turbines to form high efficiency, hybrid generators is receiving significant attention within both the academic and industrial communities. Various systems have been proposed or demonstrated, and which cover a range of sizes from low power generators suitable for domestic power generation through to larger systems in the megawatt size range. The performance of such hybrid systems depends on the matching of the fuel cell and gas turbine through optimisation of the system pressure ratio and reactant flow rates. Losses associated with non-ideal cycle components are significant and vary with component size, and must be taken into account if optimal performance is to be achieved. This paper presents an intentionally very simple numerical model of the hybrid system, so that the effect of key component efficiencies on the overall cycle efficiency can be examined easily. These component efficiencies of course scale with size, and the results presented suggest that hybrid cycles with total power output of order several MW are preferable.

Low-Carbon Clean Technology for Waste Energy Recovery in Power Plants Based on Green Environmental Protection

2021 ◽  
Author(s):  
Yong Tian ◽  
Wen-Jing Liu ◽  
Qi-jie Jiang ◽  
Xin-Ying Xu
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Biomass Energy ◽  
Energy Utilization ◽  
Pollutant Emissions ◽  
Total Power ◽  
Economic Losses ◽  
Biomass Waste ◽  
Emission Analysis ◽  
Total Power Consumption

With the development of biomass power generation technology, biomass waste has a more excellent recycling value. The article establishes a biomass waste inventory model based on the material flow analysis method and predicts raw material waste’s energy utilization potential. The results show that the amount of biomass waste generated from 2016 to 2020 is on the rise. In 2020, biomass waste’s energy utilization can reach 107,802,300 tons, equivalent to 1,955.28PJ of energy. Through biomass energy analysis and emission analysis, the results show that the biomass waste can generate 182.02 billion kW⋅h in 2020, which can replace 35.9% of the region’s total power consumption, which is compared with the traditional power generation method under the same power generation capacity. Power generation can reduce SO2 emissions by 250,400 tons, NOx emissions by 399,300 tons, and PM10 emissions by 49,700 tons. Reduce direct economic losses by 712 million yuan. Therefore, Chinese promotion of the recycling of biomass waste and the acceleration of the biomass energy industry’s development is of great significance for reducing pollutant emissions and alleviating energy pressure.

scholarly journals Operation and Test of a New 37 MW Gas Turbine Package Power Plant

1980 ◽  
Author(s):  
J. Jermanok ◽  
R. E. Keith ◽  
E. F. Backhaus
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Simple Cycle ◽  
Initial Operation ◽  
Design Features ◽  
Electric Power Generation ◽  
Gas Turbine Power Plant

A new 37-MW, single-shaft gas turbine power plant has been designed for electric power generation, for use in either simple-cycle or combined-cycle applications. This paper describes the design features, instrumentation, installation, test, and initial operation.

Introduction of the Taurus™ 65 Industrial Gas Turbine for Power Generation

2008 ◽  
Author(s):  
George Rocha ◽  
Simon Reynolds ◽  
Theresa Brown
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Electrical Power ◽  
Field Evaluation ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Liquid Fuels ◽  
Operating Cycle ◽  
Product Experience ◽  
Exhaust Heat

Solar Turbines Incorporated has combined proven technology and product experience to develop the new Taurus 65 gas turbine for industrial power generation applications. The single-shaft engine is designed to produce 6.3 megawatts of electrical power with a 33% thermal efficiency at ISO operating conditions. Selection of the final engine operating cycle was based on extensive aerodynamic-cycle studies to achieve optimum output performance with increased exhaust heat capacity for combined heat and power installations. The basic engine configuration features an enhanced version of the robust Centaur®50 air compressor coupled to a newly designed three-stage turbine similar to the Taurus 70 turbine design. Advanced cooling technology and materials are used in the dry, lean-premix annular combustor, consistent with Solar’s proven SoLoNOx™ combustion technology, capable of reducing pollutant emissions while operating on standard natural gas or diesel liquid fuels. Like the Titan™ 130 and Taurus 70 products, a traditional design philosophy has been applied in development of the Taurus 65 gas turbine by utilizing existing components, common technology and product experience to minimize risk, lower cost and maximize durability. A comprehensive factory test plan and extended field evaluation program was used to validate the design integrity and demonstrate product durability prior to full market introduction.

Proposal of Innovative Gas Turbine Combined Cycle Power Generation System

2004 ◽  
Author(s):  
Hideto Moritsuka
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Generation System ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Power Generation System

In order to estimate the possibility to improve thermal efficiency of power generation use gas turbine combined cycle power generation system, benefits of employing the advanced gas turbine technologies proposed here have been made clear based on the recently developed 1500C-class steam cooling gas turbine and 1300C-class reheat cycle gas turbine combined cycle power generation systems. In addition, methane reforming cooling method and NO reducing catalytic reheater are proposed. Based on these findings, the Maximized efficiency Optimized Reheat cycle Innovative Gas Turbine Combined cycle (MORITC) Power Generation System with the most effective combination of advanced technologies and the new devices have been proposed. In case of the proposed reheat cycle gas turbine with pressure ratio being 55, the high pressure turbine inlet temperature being 1700C, the low pressure turbine inlet temperature being 800C, combined with the ultra super critical pressure, double reheat type heat recovery Rankine cycle, the thermal efficiency of combined cycle are expected approximately 66.7% (LHV, generator end).

scholarly journals A Type-2 Fuzzy Chance-Constrained Fractional Integrated Modeling Method for Energy System Management of Uncertainties and Risks

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2472 ◽  
Author(s):  
Changyu Zhou ◽  
Guohe Huang ◽  
Jiapei Chen
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Power System ◽  
Electric Power ◽  
Clean Energy ◽  
Electric Power System ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Mixed Integer

In this study, a type-2 fuzzy chance-constrained fractional integrated programming (T2FCFP) approach is developed for the planning of sustainable management in an electric power system (EPS) under complex uncertainties. Through simultaneously coupling mixed-integer linear programming (MILP), chance-constrained stochastic programming (CCSP), and type-2 fuzzy mathematical programming (T2FMP) techniques into a fractional programming (FP) framework, T2FCFP can tackle dual objective problems of uncertain parameters with both type-2 fuzzy characteristics and stochastic effectively and enhance the robustness of the obtained decisions. T2FCFP has been applied to a case study of a typical electric power system planning to demonstrate these advantages, where issues of clean energy utilization, air-pollutant emissions mitigation, mix ratio of renewable energy power generation in the entire energy supply, and the displacement efficiency of electricity generation technologies by renewable energy are incorporated within the modeling formulation. The suggested optimal alternative that can produce the desirable sustainable schemes with a maximized share of clean energy power generation has been generated. The results obtained can be used to conduct desired energy/electricity allocation and help decision-makers make suitable decisions under different input scenarios.

Internal Reforming Solid Oxide Fuel Cell Gas Turbine Combined Cycles (IRSOFC-GT): Part B — Exergy and Thermoeconomic Analyses

2001 ◽  
Author(s):  
Aristide F. Massardo ◽  
Loredana Magistri
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Operating Conditions ◽  
Solid Oxide ◽  
Specific Work ◽  
Oxide Fuel ◽  
Internal Reforming ◽  
System Pressure ◽  
Combined Cycles

The aim of this work is to investigate the performance of Internal Reforming Solid Oxide Fuel Cell (IRSOFC) and Gas Turbine (GT) combined cycles. A mathematical model of the IRSOFC steady-state operation was presented in Part A of this work (Massardo and Lubelli, 1998), coupled to the thermodynamic analysis of a number of proposed IRSOFC-GT combined cycles, taking into account the influence of several technological constraints. In the second part of this work, both an exergy and a thermoeconomic analysis of the proposed cycles have been carried out using the TEMP code developed by the Author (Agazzani and Massardo, 1997). A suitable equation for IRSOFC cost evaluation based on cell geometry and performance has been proposed and employed to evaluate the electricity generation cost of the proposed combined systems. The results are presented and the influence of several parameters is discussed: external reformer operating conditions, fuel to air ratio, cell current density, compressor pressure ratio, etc. Diagrams proposed by the Author (Massardo and Scialo’, 2000) for cost vs. efficiency, cost vs. specific work, and cost vs. system pressure are also presented and discussed.

Internal Reforming Solid Oxide Fuel Cell Gas Turbine Combined Cycles (IRSOFC-GT)—Part II: Exergy and Thermoeconomic Analyses

2002 ◽  
Vol 125 (1) ◽  
pp. 67-74 ◽  
Author(s):  
A. F. Massardo
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Operating Conditions ◽  
Solid Oxide ◽  
Specific Work ◽  
Oxide Fuel ◽  
Internal Reforming ◽  
System Pressure ◽  
Combined Cycles

The aim of this work is to investigate the performance of internal reforming solid oxide fuel cell (IRSOFC) and gas turbine (GT) combined cycles. A mathematical model of the IRSOFC steady-state operation was presented in Part I of this work coupled to the thermodynamic analysis of a number of proposed IRSOFC-GT combined cycles, taking into account the influence of several technological constraints. In the second part of this work, both an exergy and a thermoeconomic analysis of the proposed cycles have been carried out using the TEMP code developed by the author. A suitable equation for IRSOFC cost evaluation based on cell geometry and performance has been proposed and employed to evaluate the electricity generation cost of the proposed combined systems. The results are presented and the influence of several parameters is discussed: external reformer operating conditions, fuel-to-air ratio, cell current density, compressor pressure ratio, etc. Diagrams proposed by the author for cost versus efficiency, cost versus specific work, and cost versus system pressure are also presented and discussed.

A Unique Approach for Thermo-Economic Optimization of an Intercooled, Reheat and Recuperated Gas Turbine for Cogeneration Applications

2001 ◽  
Author(s):  
R. Bhargava ◽  
A. Peretto
Keyword(s):  
Gas Turbine ◽  
Economic Performance ◽  
Performance Optimization ◽  
Pressure Ratio ◽  
Cost Structure ◽  
The Other ◽  
Specific Work ◽  
Sale Price ◽  
Wide Range ◽  
Gas Turbine Cycle

In the present paper, a comprehensive methodology for the thermo-economic performance optimization of an intercooled reheat (ICRH) gas turbine with recuperation for cogenerative applications has been presented covering a wide range of power-to-heat ratio values achievable. To show relative changes in the thermo-economic performance for the recuperated ICRH gas turbine cycle, results for ICRH, recuperated Brayton and simple Brayton cycles are also included in the paper. For the three load cases investigated, the recuperated ICRH gas turbine cycle provides the highest values of electric efficiency and Energy Saving Index for the cogenerative systems requiring low thermal loads (high power-to-heat ratio) compared to the other cycles. Also, this study showed, in general, that the recuperated ICRH cycle permits wider power-to-heat ratio range compared to the other cycles and for different load cases examined, a beneficial thermodynamic characteristic for the cogeneration applications. Furthermore, this study clearly shows that implementation of the recuperated ICRH cycle in a cogeneration system will permit to design a gas turbine which has the high specific work capacity and high electric efficiency at low value of the overall cycle pressure ratio compared to the other cycles studied. Economic performance of the investigated gas turbine cycles have been found dependent on the power-to-heat ratio value and the selected cost structure (fuel cost, electric sale price, steam sale price etc.), the results for a selected cost structure in the study are discussed in this paper.

Sign in / Sign up

Export Citation Format

Share Document