CFD Study of Propeller Cavitation With Hull-Propeller Interaction

2019 ◽  
Author(s):  
Chang Wei Kang ◽  
Xiuqing Xing
Keyword(s):  
Free Surface ◽  
Flow Field ◽  
High Performance ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Simulation Accuracy ◽  
Eddy Simulation ◽  
Marine Industry ◽  
Propeller Blades ◽  
Cfd Method

Abstract Propeller cavitation is the root cause for noise, hull vibration, as well as erosion on the propeller blades and appendages. Although it is a common practice for marine industry to predict the propeller cavitation by model tests, numerical simulation of propeller performance and the hull-propeller interaction has become feasible with the advancement of high performance computing. In this study, numerical studies of the flow field details around the ship hull with a rotating propeller are performed using Computational Fluid Dynamics (CFD) method by solving the unsteady Reynolds Averaged Navier-Stokes (RANS) equations. The numerical model is developed with commercial software package STAR-CCM+ for the cavitation prediction by considering the hull/propeller interactions and the free surface. Rotating propeller is modeled with an overset mesh, while κ-ω turbulence model is chosen instead of large eddy simulation (LES) or detached eddy simulation (DES) for higher computational efficiency while maintaining satisfied simulation accuracy. Cavitation bubble growth and collapse are estimated using Schnerr-Sauer cavitation model based on Rayleigh-Plesset equation. Simulation results suggest that the model developed in this study is capable to capture the flow field details under the effect of hull-propeller interactions and the free surface. This includes the cavitation emerging position, extinction position, as well as the cavitation patterns on the blade surface at various angular positions. The cavitation induced pressure oscillations on the hull at 1st to 3rd harmonics of Blade Passing Frequency (BPF) are also analyzed. The pressure fluctuation result can provide pressure load information for hull vibration evaluations in future.

scholarly journals Comparative Study on CFD Turbulence Models for the Flow Field in Air Cooled Radiator

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1687
Author(s):  
Chao Yu ◽  
Xiangyao Xue ◽  
Kui Shi ◽  
Mingzhen Shao ◽  
Yang Liu
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Compartment Model ◽  
Navier Stokes ◽  
Engine Compartment ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Relevant Calculation

This paper compares the performances of three Computational Fluid Dynamics (CFD) turbulence models, Reynolds Average Navier-Stokes (RANS), Detached Eddy Simulation (DES), and Large Eddy Simulation (LES), for simulating the flow field of a wheel loader engine compartment. The distributions of pressure fields, velocity fields, and vortex structures in a hybrid-grided engine compartment model are analyzed. The result reveals that the LES and DES can capture the detachment and breakage of the trailing edge more abundantly and meticulously than RANS. Additionally, by comparing the relevant calculation time, the feasibility of the DES model is proved to simulate the three-dimensional unsteady flow of engine compartment efficiently and accurately. This paper aims to provide a guiding idea for simulating the transient flow field in the engine compartment, which could serve as a theoretical basis for optimizing and improving the layout of the components of the engine compartment.

Experimental and numerical analyses of gas–solid-multiphase jet in cross-flow

2012 ◽  
Vol 227 (1) ◽  
pp. 61-79 ◽  
Author(s):  
Yao Fu ◽  
Tong Wang ◽  
Chuangang Gu
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Cross Flow ◽  
Jet Flow ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Calculation Methods ◽  
Mean Flow ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes

In this article, jet influence on a gas–solid-multiphase channel flow was experimentally and numerically studied. The jet flow was found to have a diameter-selective controlling effect on the particles’ distribution. Jet flow formed a gas barrier in the channel for particles. While tiny particles could travel around and large particles could travel through, only particles on the 10 -µm scale were obviously affected. Three different calculation methods, Reynolds averaged Navier–Stokes, unsteady Reynolds averaged Navier–Stokes, and detached eddy simulation, were used to simulate this multiphase flow. By comparing the calculation results to the experimental results, it is found that all the three calculation methods could capture the basic phenomenon in the mean flow field. Nevertheless, there exist great differences in the transient flow field and particle distribution.

Numerical Prediction of Bare and Straked Cylinder VIV

2006 ◽  
Author(s):  
Yiannis Constantinides ◽  
Owen H. Oakley
Keyword(s):  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Numerical Studies ◽  
Vortex Induced Vibrations ◽  
Computational Fluid Dynamics Cfd ◽  
Offshore Industry ◽  
High Reynolds ◽  
Cfd Method

The prediction of deepwater riser Vortex Induced Vibrations (VIV) is one of the most challenging areas in the offshore industry. Numerous experimental and numerical studies have been performed in an effort to improve the understanding and prediction of cylinder VIV behavior. This paper presents the numerical simulation of rigid circular sections, both bare and fitted with strakes, using a second order accurate finite element computational fluid dynamics (CFD) method. Two turbulence models are examined: the Spalart-Allmaras Reynolds Averaged Navier Stokes (RANS) and the Detached Eddy Simulation (DES). Pragmatic high Reynolds number simulations of fixed and moving cylinders are presented and compared with laboratory experiments. Flow visualization provides insights on how strakes mitigate VIV. Comparisons between RANS and DES results are also presented and discussed.

scholarly journals Numerical Simulation and Characteristic Analysis of Ship's Air Flow Field

2018 ◽  
Vol 36 (6) ◽  
pp. 1037-1044
Author(s):  
Jiahao Guo ◽  
Xiaoping Zhu ◽  
Zhou Zhou ◽  
Xiaoping Xu
Keyword(s):  
Flow Field ◽  
Velocity Fluctuation ◽  
Air Flow ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Reasonable Accuracy ◽  
Characteristic Analysis ◽  
Eddy Simulation ◽  
Flight Deck ◽  
The Ideal

The air flow field of ship was simulated by using computational fluid dynamics technology to analyze its prime characteristics with reasonable accuracy. The different results of Reynolds-Averaged Navier-Stokes (RANS) method and Detached Eddy Simulation (DES) were compared, and the calculation traits of these methods were discussed. The results show that the air flow field of ship is unsteady. The accuracy of RANS simulation is insufficient for capturing this unsteady phenomenon. However, DES can catch this with better accuracy and expresses a comparatively great conformity with experimental data. Then, the aircraft carrier's flow field was calculated by DES. The characteristics of vortexes and velocity fluctuation on the ideal landing track were discussed in different wind directions. Those simulations indicate that there are complicated vortexes produced by blunt edges of the island and deck in the flow field. Those vortexes interact and mainly exist in the rear of flight deck and its adjacent air wake. Moreover, they cause a conspicuous and periodical velocity fluctuation on the ideal landing track as time goes on.

Zonal Detached-Eddy Simulation Approach vs. URANS for the Prediction of the Flow Field Through a Low Pressure Vane Located Downstream of a Transonic High Pressure Turbine

2015 ◽  
Author(s):  
Pierre Gougeon ◽  
Ghislaine Ngo Boum
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Computational Cost ◽  
Low Pressure ◽  
Good Alternative ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
High Pressure Turbine ◽  
Eddy Simulation ◽  
Numerical Predictions

The present work aims at studying the aerodynamic flow field within the first Low Pressure Vane (LPV) located downstream of a transonic High Pressure Turbine (HPT). A Zonal Detached-Eddy Simulation (ZDES) which is an hybrid URANS (Unsteady Reynolds Averaged Navier-Stokes)-DES approach, appears as a good alternative in terms of computational cost and quality of turbulent phenomena description when it comes to the capture of key parameters of losses generation in a LPV. ZDES is used on the LPV and the unsteady periodic flow field coming from the upstream HPT is modelled through a nonuniform rotating inlet boundary condition. The result is compared to a URANS simulation carried out with the same mesh and numerical parameters: this enables to quantify the differences and to state on the benefit of an advanced turbulent approach. Turbulent mechanisms are assessed with the computation of the power spectral density at different locations in the domain. To complete the analysis, the two numerical predictions are compared to experimental data. Wakes and vortices evolutions are studied in detail making it possible to put them into perspective with the aerodynamic losses generated in the LPV.

Numerical study of the flow over the modified simple frigate shape

2020 ◽  
pp. 095441002097775
Author(s):  
Tong Li ◽  
Yibin Wang ◽  
Ning Zhao
Keyword(s):  
Bluff Body ◽  
Recirculation Zone ◽  
Numerical Study ◽  
Reference Value ◽  
Flow Fields ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Simulation Results

The simple frigate shape (SFS) as defined by The Technical Co-operative Program (TTCP), is a simplified model of the frigate, which helps to investigate the basic flow fields of a frigate. In this paper, the flow fields of the different modified SFS models, consisting of a bluff body superstructure and the deck, were numerically studied. A parametric study was conducted by varying both the superstructure length L and width B to investigate the recirculation zone behind the hangar. The size and the position of the recirculation zones were compared between different models. The numerical simulation results show that the size and the location of the recirculation zone are significantly affected by the superstructure length and width. The results obtained by Reynolds-averaged Navier-Stokes method were also compared well with both the time averaged Improved Delayed Detached-Eddy Simulation results and the experimental data. In addition, by varying the model size and inflow velocity, various flow fields were numerically studied, which indicated that the changing of Reynolds number has tiny effect on the variation of the dimensionless size of the recirculation zone. The results in this study have certain reference value for the design of the frigate superstructure.

Numerical Investigation of Intermittent Corner Separation in a Linear Compressor Cascade

2016 ◽  
Author(s):  
Wei Ma ◽  
Feng Gao ◽  
Xavier Ottavy ◽  
Lipeng Lu ◽  
A. J. Wang
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Leading Edge ◽  
Suction Side ◽  
Detached Eddy Simulation ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Corner Separation ◽  
Eddy Simulation ◽  
Linear Compressor Cascade

Recently bimodal phenomenon in corner separation has been found by Ma et al. (Experiments in Fluids, 2013, doi:10.1007/s00348-013-1546-y). Through detailed and accurate experimental results of the velocity flow field in a linear compressor cascade, they discovered two aperiodic modes exist in the corner separation of the compressor cascade. This phenomenon reflects the flow in corner separation is high intermittent, and large-scale coherent structures corresponding to two modes exist in the flow field of corner separation. However the generation mechanism of the bimodal phenomenon in corner separation is still unclear and thus needs to be studied further. In order to obtain instantaneous flow field with different unsteadiness and thus to analyse the mechanisms of bimodal phenomenon in corner separation, in this paper detached-eddy simulation (DES) is used to simulate the flow field in the linear compressor cascade where bimodal phenomenon has been found in previous experiment. DES in this paper successfully captures the bimodal phenomenon in the linear compressor cascade found in experiment, including the locations of bimodal points and the development of bimodal points along a line that normal to the blade suction side. We infer that the bimodal phenomenon in the corner separation is induced by the strong interaction between the following two facts. The first is the unsteady upstream flow nearby the leading edge whose angle and magnitude fluctuate simultaneously and significantly. The second is the high unsteady separation in the corner region.

Detached Eddy Simulation of Transonic Rotor Stall Flutter Using a Fully Coupled Fluid-Structure Interaction

2011 ◽  
Author(s):  
Hongsik Im ◽  
Xiangying Chen ◽  
Gecheng Zha
Keyword(s):  
Stokes Equations ◽  
Rotating Stall ◽  
Rotor Blades ◽  
Tip Clearance ◽  
Weno Scheme ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Stall Flutter ◽  
Fully Coupled

Detached eddy simulation of an aeroelastic self-excited instability, flutter in NASA Rotor 67 is conducted using a fully coupled fluid/structre interaction. Time accurate compressible 3D Navier-Stokes equations are solved with a system of 5 decoupled modal equations in a fully coupled manner. The 5th order WENO scheme for the inviscid flux and the 4th order central differencing for the viscous flux are used to accurately capture interactions between the flow and vibrating blades with the DES (detached eddy simulation) of turbulence. A moving mesh concept that can improve mesh quality over the rotor tip clearance was implemented. Flutter simulations were first conducted from choke to stall using 4 blade passages. Stall flutter initiated at rotating stall onset, grows dramatically with resonance. The frequency analysis shows that resonance occurs at the first mode of the rotor blade. Before stall, the predicted responses of rotor blades decayed with time, resulting in no flutter. Full annulus simulation at peak point verifies that one can use the multi-passage approach with periodic boundary for the flutter prediction.

Flow Field Unsteadiness in the Tip Region of a Transonic Compressor Rotor

1997 ◽  
Vol 119 (1) ◽  
pp. 122-128 ◽  
Author(s):  
S. L. Puterbaugh ◽  
W. W. Copenhaver
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Vortex Interaction ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Operating Points

An experimental investigation concerning tip flow field unsteadiness was performed for a high-performance, state-of-the-art transonic compressor rotor. Casing-mounted high frequency response pressure transducers were used to indicate both the ensemble averaged and time varying flow structure present in the tip region of the rotor at four different operating points at design speed. The ensemble averaged information revealed the shock structure as it evolved from a dual shock system at open throttle to an attached shock at peak efficiency to a detached orientation at near stall. Steady three-dimensional Navier Stokes analysis reveals the dominant flow structures in the tip region in support of the ensemble averaged measurements. A tip leakage vortex is evident at all operating points as regions of low static pressure and appears in the same location as the vortex found in the numerical solution. An unsteadiness parameter was calculated to quantify the unsteadiness in the tip cascade plane. In general, regions of peak unsteadiness appear near shocks and in the area interpreted as the shock-tip leakage vortex interaction. Local peaks of unsteadiness appear in mid-passage downstream of the shock-vortex interaction. Flow field features not evident in the ensemble averaged data are examined via a Navier-Stokes solution obtained at the near stall operating point.

Detached-Eddy Simulations Over a Simplified Landing Gear

2002 ◽  
Vol 124 (2) ◽  
pp. 413-423 ◽  
Author(s):  
L. S. Hedges ◽  
A. K. Travin ◽  
P. R. Spalart
Keyword(s):  
Stokes Equations ◽  
Separated Flow ◽  
Flow Fields ◽  
Equation Model ◽  
Landing Gear ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Instantaneous Flow ◽  
Eddy Simulation

The flow around a generic airliner landing-gear truck is calculated using the methods of Detached-Eddy Simulation, and of Unsteady Reynolds-Averaged Navier-Stokes Equations, with the Spalart-Allmaras one-equation model. The two simulations have identical numerics, using a multi-block structured grid with about 2.5 million points. The Reynolds number is 6×105. Comparison to the experiment of Lazos shows that the simulations predict the pressure on the wheels accurately for such a massively separated flow with strong interference. DES performs somewhat better than URANS. Drag and lift are not predicted as well. The time-averaged and instantaneous flow fields are studied, particularly to determine their suitability for the physics-based prediction of noise. The two time-averaged flow fields are similar, though the DES shows more turbulence intensity overall. The instantaneous flow fields are very dissimilar. DES develops a much wider range of unsteady scales of motion and appears promising for noise prediction, up to some frequency limit.

Sign in / Sign up

Export Citation Format

Share Document