Detached-Eddy Simulations Over a Simplified Landing Gear

2002 ◽  
Vol 124 (2) ◽  
pp. 413-423 ◽  
Author(s):  
L. S. Hedges ◽  
A. K. Travin ◽  
P. R. Spalart
Keyword(s):  
Stokes Equations ◽  
Separated Flow ◽  
Flow Fields ◽  
Equation Model ◽  
Landing Gear ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Instantaneous Flow ◽  
Eddy Simulation

The flow around a generic airliner landing-gear truck is calculated using the methods of Detached-Eddy Simulation, and of Unsteady Reynolds-Averaged Navier-Stokes Equations, with the Spalart-Allmaras one-equation model. The two simulations have identical numerics, using a multi-block structured grid with about 2.5 million points. The Reynolds number is 6×105. Comparison to the experiment of Lazos shows that the simulations predict the pressure on the wheels accurately for such a massively separated flow with strong interference. DES performs somewhat better than URANS. Drag and lift are not predicted as well. The time-averaged and instantaneous flow fields are studied, particularly to determine their suitability for the physics-based prediction of noise. The two time-averaged flow fields are similar, though the DES shows more turbulence intensity overall. The instantaneous flow fields are very dissimilar. DES develops a much wider range of unsteady scales of motion and appears promising for noise prediction, up to some frequency limit.

scholarly journals Turbulence Modeling a Review for Different Used Methods

2021 ◽  
Vol 39 (1) ◽  
pp. 227-234
Author(s):  
Khelifa Hami
Keyword(s):  
Turbulence Modeling ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Simulation Models ◽  
Navier Stokes ◽  
Future Research ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Complicated Geometries

This contribution represents a critical view of the advantages and limits of the set of mathematical models of the physical phenomena of turbulence. Turbulence models can be grouped into two categories, depending on how turbulent quantities are calculated: direct numerical simulations (DNS) and RANS (Reynolds Averaged Navier-Stokes Equations) models. The disadvantage of these models is that they require enormous computing power, inaccessible, especially for large and complicated geometries. For this reason, hybrid models (combinations between DNS and RANS methods) have been developed, for example, the LES (“Large Eddy Simulation”) or DES (“Detached Eddy Simulation”) models. They represent a compromise - are less precise than DNS, but more precise than RANS models. The results presented in this contribution will allow and facilitate future research in the field the choice of the model approach necessary for the case studies whatever their difficulty factor.

Recent achievements in numerical simulation for aircraft power-plant configurations

2013 ◽  
Vol 117 (1188) ◽  
pp. 213-231 ◽  
Author(s):  
J. Reneaux ◽  
V. Brunet ◽  
S. Esquieu ◽  
M. Meunier ◽  
S. Mouton
Keyword(s):  
Stokes Equations ◽  
Simulation Method ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Turbofan Engine ◽  
Navier Stokes Equations ◽  
Transport Aircraft ◽  
Eddy Simulation ◽  
Control Technologies ◽  
Complex Phenomena

Abstract The engine/airframe integration design is one key differentiating factor for making efficient transport aircraft and this topic will become more important for future aircraft as the turbofan engine diameter is increased leading to a stronger engine-airframe interaction. Hopefully, the capabilities of advanced numerical simulations allow the involved complex phenomena to be taken into account and this is illustrated in this paper through several research studies: the use of the Reynolds averaged Navier-Stokes equations together with the drag extraction techniques to predict the drag, the simulation of unsteady complex interaction between the jet and the pylon with the zonal detached eddy simulation method, the pylon and nacelle design through multi disciplinary optimisation and the flow control technologies.

Numerical study of the flow over the modified simple frigate shape

2020 ◽  
pp. 095441002097775
Author(s):  
Tong Li ◽  
Yibin Wang ◽  
Ning Zhao
Keyword(s):  
Bluff Body ◽  
Recirculation Zone ◽  
Numerical Study ◽  
Reference Value ◽  
Flow Fields ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Simulation Results

The simple frigate shape (SFS) as defined by The Technical Co-operative Program (TTCP), is a simplified model of the frigate, which helps to investigate the basic flow fields of a frigate. In this paper, the flow fields of the different modified SFS models, consisting of a bluff body superstructure and the deck, were numerically studied. A parametric study was conducted by varying both the superstructure length L and width B to investigate the recirculation zone behind the hangar. The size and the position of the recirculation zones were compared between different models. The numerical simulation results show that the size and the location of the recirculation zone are significantly affected by the superstructure length and width. The results obtained by Reynolds-averaged Navier-Stokes method were also compared well with both the time averaged Improved Delayed Detached-Eddy Simulation results and the experimental data. In addition, by varying the model size and inflow velocity, various flow fields were numerically studied, which indicated that the changing of Reynolds number has tiny effect on the variation of the dimensionless size of the recirculation zone. The results in this study have certain reference value for the design of the frigate superstructure.

Detached Eddy Simulation of Transonic Rotor Stall Flutter Using a Fully Coupled Fluid-Structure Interaction

2011 ◽  
Author(s):  
Hongsik Im ◽  
Xiangying Chen ◽  
Gecheng Zha
Keyword(s):  
Stokes Equations ◽  
Rotating Stall ◽  
Rotor Blades ◽  
Tip Clearance ◽  
Weno Scheme ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Stall Flutter ◽  
Fully Coupled

Detached eddy simulation of an aeroelastic self-excited instability, flutter in NASA Rotor 67 is conducted using a fully coupled fluid/structre interaction. Time accurate compressible 3D Navier-Stokes equations are solved with a system of 5 decoupled modal equations in a fully coupled manner. The 5th order WENO scheme for the inviscid flux and the 4th order central differencing for the viscous flux are used to accurately capture interactions between the flow and vibrating blades with the DES (detached eddy simulation) of turbulence. A moving mesh concept that can improve mesh quality over the rotor tip clearance was implemented. Flutter simulations were first conducted from choke to stall using 4 blade passages. Stall flutter initiated at rotating stall onset, grows dramatically with resonance. The frequency analysis shows that resonance occurs at the first mode of the rotor blade. Before stall, the predicted responses of rotor blades decayed with time, resulting in no flutter. Full annulus simulation at peak point verifies that one can use the multi-passage approach with periodic boundary for the flutter prediction.

Modeling of the Vortex-Structure in a Particle-Laden Mixing-Layer

2005 ◽  
Author(s):  
Jens A. Melheim ◽  
Stefan Horender ◽  
Martin Sommerfeld
Keyword(s):  
Vortex Structure ◽  
Stokes Equations ◽  
Fluid Velocity ◽  
Mixing Layer ◽  
Equation Model ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Calculated Concentration ◽  
Langevin Model ◽  
Particle Velocities

Numerical calculations of a particle-laden turbulent horizontal mixing-layer based on the Eulerian-Lagrangian approach are presented. Emphasis is given to the determination of the stochastic fluctuating fluid velocity seen by the particles in anisotropic turbulence. The stochastic process for the fluctuating velocity is a “Particle Langevin equation Model”, based on the Simplified Langevin Model. The Reynolds averaged Navier-Stokes equations are closed by the standard k-epsilon turbulence model. The calculated concentration profile and the mean, the root-mean-square (rms) and the cross-correlation terms of the particle velocities are compared with particle image velocimetry (PIV) measurements. The numerical results agree reasonably well with the PIV data for all of the mentioned quantities. The importance of the modeled vortex structure “seen” by the particles is discussed.

Numerical Investigation of Blade Flutter at or Near Stall in Axial Flow Turbomachines

2001 ◽  
Author(s):  
Wolfgang Höhn
Keyword(s):  
Viscous Flow ◽  
Stokes Equations ◽  
Separated Flow ◽  
Parallel Computer ◽  
Navier Stokes ◽  
Computational Domain ◽  
Compressor Cascade ◽  
Governing Equations ◽  
Navier Stokes Equations ◽  
Blade Flutter

During the design of the compressor and turbine stages of today’s aeroengines, aerodynamically induced vibrations become increasingly important since higher blade load and better efficiency are desired. In this paper the development of a method based on the unsteady, compressible Navier-Stokes equations in two dimensions is described in order to study the physics of flutter for unsteady viscous flow around cascaded vibrating blades at stall. The governing equations are solved by a finite difference technique in boundary fitted coordinates. The numerical scheme uses the Advection Upstream Splitting Method to discretize the convective terms and central differences discretizing the viscous terms of the fully non-linear Navier-Stokes equations on a moving H-type mesh. The unsteady governing equations are explicitly and implicitly marched in time in a time-accurate way using a four stage Runge-Kutta scheme on a parallel computer or an implicit scheme of the Beam-Warming type on a single processor. Turbulence is modelled using the Baldwin-Lomax turbulence model. The blade flutter phenomenon is simulated by imposing a harmonic motion on the blade, which consists of harmonic body translation in two directions and a rotation, allowing an interblade phase angle between neighboring blades. Non-reflecting boundary conditions are used for the unsteady analysis at inlet and outlet of the computational domain. The computations are performed on multiple blade passages in order to account for nonlinear effects. A subsonic massively stalled unsteady flow case in a compressor cascade is studied. The results, compared with experiments and the predictions of other researchers, show reasonable agreement for inviscid and viscous flow cases for the investigated flow situations with respect to the Steady and unsteady pressure distribution on the blade in separated flow areas as well as the aeroelastic damping. The results show the applicability of the scheme for stalled flow around cascaded blades. As expected the viscous and inviscid computations show different results in regions where viscous effects are important, i.e. in separated flow areas. In particular, different predictions for inviscid and viscous flow for the aerodynamic damping for the investigated flow cases are found.

A Cartesian Explicit Solver for Complex Hydrodynamic Applications

2014 ◽  
Author(s):  
P. Bigay ◽  
A. Bardin ◽  
G. Oger ◽  
D. Le Touzé
Keyword(s):  
Level Set ◽  
Incompressible Flows ◽  
Stokes Equations ◽  
Simulation Method ◽  
Navier Stokes ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Flow Past A Cylinder ◽  
Explicit Solver

In order to efficiently address complex problems in hydrodynamics, the advances in the development of a new method are presented here. This method aims at finding a good compromise between computational efficiency, accuracy, and easy handling of complex geometries. The chosen method is an Explicit Cartesian Finite Volume method for Hydrodynamics (ECFVH) based on a compressible (hyperbolic) solver, with a ghost-cell method for geometry handling and a Level-set method for the treatment of biphase-flows. The explicit nature of the solver is obtained through a weakly-compressible approach chosen to simulate nearly-incompressible flows. The explicit cell-centered resolution allows for an efficient solving of very large simulations together with a straightforward handling of multi-physics. A characteristic flux method for solving the hyperbolic part of the Navier-Stokes equations is used. The treatment of arbitrary geometries is addressed in the hyperbolic and viscous framework. Viscous effects are computed via a finite difference computation of viscous fluxes and turbulent effects are addressed via a Large-Eddy Simulation method (LES). The Level-Set solver used to handle biphase flows is also presented. The solver is validated on 2-D test cases (flow past a cylinder, 2-D dam break) and future improvements are discussed.

FINITE ELEMENT ERROR ANALYSIS OF SPACE AVERAGED FLOW FIELDS DEFINED BY A DIFFERENTIAL FILTER

2004 ◽  
Vol 14 (04) ◽  
pp. 603-618 ◽  
Author(s):  
ADRIAN DUNCA ◽  
VOLKER JOHN
Keyword(s):  
Finite Element ◽  
Stokes Equations ◽  
Finite Element Approximation ◽  
Flow Fields ◽  
Navier Stokes ◽  
Element Approximation ◽  
Navier Stokes Equations ◽  
Finite Element Approximations ◽  
Three Space ◽  
Element Error

This paper analyzes finite element approximations of space averaged flow fields which are given by filtering, i.e. averaging in space, the solution of the steady state Stokes and Navier–Stokes equations with a differential filter. It is shown that [Formula: see text], the error of the filtered velocity [Formula: see text] and the filtered finite element approximation of the velocity [Formula: see text], converges under certain conditions of higher order than [Formula: see text], the error of the velocity and its finite element approximation. It is also proved that this statement stays true if the L2-error of finite element approximations of [Formula: see text] and [Formula: see text] is considered. Numerical tests in two and three space dimensions support the analytical results.

Merging Near-Wall RANS Models With LES for Separating and Reattaching Flows

2006 ◽  
Author(s):  
Suad Jakirlic´ ◽  
Bjo¨rn Kniesner ◽  
Sanjin Sˇaric´ ◽  
Kemal Hanjalic´
Keyword(s):  
Reynolds Number ◽  
Equation Model ◽  
Navier Stokes ◽  
Model Parameters ◽  
Wall Region ◽  
Detached Eddy Simulation ◽  
Rans Model ◽  
Eddy Simulation ◽  
Moderate Reynolds Number ◽  
Near Wall

A method of coupling a low-Reynolds-number k–ε RANS (Reynolds-Averaged Navier-Stokes) model with Large-Eddy Simulation (LES) in a two-layer Hybrid LES/RANS (HLR) scheme is proposed in the present work. The RANS model covers the near-wall region and the LES model the remainder of the flow domain. Two different subgrid-scale (SGS) models in LES were considered, the Smagorinsky model and the one-equation model for the residual kinetic energy (Yoshizawa and Horiuti, 1985), combined with two versions of the RANS ε equation, one governing the “isotropic” (ε˜; Chien, 1982) and the other the “homogeneous” dissipation rate (εh; Jakirlic and Hanjalic, 2002). Both fixed and self-adjusting interface locations were considered. The exchange of the variables across the interface was adjusted by smoothing the turbulence viscosity either by adjusting the RANS model parameters, such as Cμ (Temmerman et al., 2005), or by applying an additional forcing at the interface using a method of digital-filter-based generation of inflow data for spatially developing DNS and LES due to Klein et al. (2003). The feasibility of the method was illustrated against the available DNS, fine- and coarse grid LES, DES (Detached Eddy Simulation) and experiments in turbulent flow over a backward-facing step at a low (Yoshioka et al., 2001) and a high Re number (Vogel and Eaton, 1985), periodic flow over a series of 2-D hills (Fro¨hlich et al., 2005) and in a high-Re flow over a 2-D, wall-mounted hump (Greenblat et al, 2004). Prior to these computations, the method was validated in a fully-developed channel flow at a moderate Reynolds number Rem ≈ 24000 (Abe et al., 2004).

Sign in / Sign up

Export Citation Format

Share Document