Chemically assisted focused-ion-beam etching for tungsten x-ray mask repair

1993 ◽  
Author(s):  
Lloyd R. Harriott ◽  
R. R. Kola ◽  
George K. Celler
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Ion Beam Etching ◽  
X Ray

Repairing Ta absorber x-ray masks with gas-assisted focused-ion-beam etching

1997 ◽  
Author(s):  
Ikuo Okada ◽  
Yasunao Saitoh ◽  
Makoto Hamashima ◽  
Misao Sekimoto ◽  
Tadahito Matsuda
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Ion Beam Etching ◽  
X Ray

3D Observation of Elemental Distribution of Si-Device using a Dedicated FIB/STEM System

2005 ◽  
Author(s):  
T. Yaguchi ◽  
M. Konno ◽  
T. Kamino ◽  
M. Ogasawara ◽  
K. Kaji ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Elemental Distribution ◽  
Multivariate Statistical ◽  
X Ray ◽  
Sample Rotation ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Elemental Maps

Abstract A technique for preparation of a pillar shaped sample and its multi-directional observation of the sample using a focused ion beam (FIB) / scanning transmission electron microscopy (STEM) system has been developed. The system employs an FIB/STEM compatible sample rotation holder with a specially designed rotation mechanism, which allows the sample to be rotated 360 degrees [1-3]. This technique was used for the three dimensional (3D) elemental mapping of a contact plug of a Si device in 90 nm technology. A specimen containing a contact plug was shaped to a pillar sample with a cross section of 200 nm x 200 nm and a 5 um length. Elemental analysis was performed with a 200 kV HD-2300 STEM equipped with the EDAX genesis Energy dispersive X-ray spectroscopy (EDX) system. Spectrum imaging combined with multivariate statistical analysis (MSA) [4, 5] was used to enhance the weak X-ray signals of the doped area, which contain a low concentration of As-K. The distributions of elements, especially the dopant As, were successfully enhanced by MSA. The elemental maps were .. reconstructed from the maps.

Growth Mechanism and Field Emission Characteristics of GaO/GaN Nanotips Using Iodine-assisted Enhanced Focused Ion Beam Etching

2011 ◽  
Vol 7 (4) ◽  
pp. 594-597
Author(s):  
Zhan-Shuo Hu ◽  
Fei-Yi Hung ◽  
Shoou-Jinn Chang ◽  
Bohr-Ran Huang ◽  
Bo-Cheng Lin ◽  
...  
Keyword(s):  
Field Emission ◽  
Growth Mechanism ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Emission Characteristics ◽  
Ion Beam Etching

Oxidation of Alloy-X in Subcritical, Transition, and Supercritical Water

CORROSION ◽  
10.5006/3881 ◽  
2021 ◽  
Author(s):  
Zachary Karmiol ◽  
Dev Chidambaram
Keyword(s):  
Supercritical Water ◽  
Photoelectron Spectroscopy ◽  
Focused Ion Beam ◽  
Elevated Temperatures ◽  
Subcritical Water ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Based Superalloy ◽  
Before And After

This work investigates the oxidation of a nickel based superalloy, namely Alloy X, in water at elevated temperatures: subcritical water at 261°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water at 380°C and 27 MPa for 100 hours. The morphology of the sample surfaces were studied using scanning electron microscopy coupled with focused ion beam milling, and the surface chemistry was investigated using X-ray diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy before and after exposure studies. Surfaces of all samples were identified to comprise of a ferrite spinel containing aluminum.

High Conductivity FIB Deposited Metal

1995 ◽  
Vol 396 ◽  
Author(s):  
P.G. Blauner ◽  
A. Wagner
Keyword(s):  
Focused Ion Beam ◽  
High Efficiency ◽  
Ion Beam ◽  
Deposition Process ◽  
Gold Deposition ◽  
X Ray ◽  
Annealing Step ◽  
Deposited Metal ◽  
Major Application ◽  
Deposition Processes

AbstractThe ion beam induced metal deposition processes now employed by commercial focused ion beam (FIB) tools all demonstrate less than optimal characteristics for use in circuit repair, a major application of these tools. In particular, the processes have low efficiencies, the metals produced have poor conductivity, and some form of clean up is generally required to remove excess material surrounding the repair site. The gold deposition process developed for x-ray mask repair, in contrast, exhibits efficiencies 10-50 times higher with significantly less material deposited in unwanted areas. Unfortunately, the conductivity of the gold is even poorer than that of materials now used for FIB circuit repair.In this paper, an annealing step which improves the conductivity of FIB deposited Au is described. Results are presented demonstrating resistivities of 5-15 μΩ-cm while maintaining the high efficiency of the gold deposition process. The suitability of the process for use in FIB circuit repair is discussed.

scholarly journals Focused Ion Beam Etching of GaN

1999 ◽  
Vol 4 (S1) ◽  
pp. 769-774 ◽  
Author(s):  
C. Flierl ◽  
I.H. White ◽  
M. Kuball ◽  
P.J. Heard ◽  
G.C. Allen ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Etching Rate ◽  
Side Wall ◽  
Device Fabrication ◽  
Direct Write ◽  
Ion Beam Etching ◽  
Etched Surface ◽  
A Current ◽  
Established Technique

We have investigated the use of focused ion beam (FIB) etching for the fabrication of GaN-based devices. Although work has shown that conventional reactive ion etching (RIE) is in most cases appropriate for the GaN device fabrication, the direct write facility of FIB etching – a well-established technique for optical mask repair and for IC failure analysis and repair – without the requirement for depositing an etch mask is invaluable. A gallium ion beam of about 20nm diameter was used to sputter GaN material. The etching rate depends linearly on the ion dose per area with a slope of 3.5 × 10−4 μm3/pC. At a current of 3nA, for example, this corresponds to an each rate of 1.05 μm3/s. Good etching qualities have been achieved with a side wall roughness significantly below 0.1 μm. Change in the roughness of the etched surface plane stay below 8nm.

Sign in / Sign up

Export Citation Format

Share Document