Frequency effects of a rotating magnetic field on fluid flow in vertical cylinders

Author(s):  
Konstantin Mazuruk ◽  
Narayanan Ramachandran ◽  
Martin P. Volz ◽  
Donald C. Gillies
Author(s):  
Kenichi Kamioka ◽  
Ryuichiro Yamane

The experiments are conducted on the magnetic fluid flow induced by the multi-pole rotating magnetic field in a circular cylinder. The numbers of poles are two, four, six, eight and twelve. The applied electric current and frequency are 2∼6 A and 20∼60 Hz, respectively. The peak velocity of the flow increases with the increase in the strength and the phase velocity of the magnetic field. As the increase in the number of poles, the flow shifts to the outer periphery.


2011 ◽  
Vol 311-313 ◽  
pp. 600-608
Author(s):  
Zhao Chen ◽  
Xiao Li Wen ◽  
Chang Le Chen

Solidification behaviour of Pb-Bi alloys under rotating magnetic field (RMF) was investigated experimentally to understand the effect of the frequency of RMF on the nucleation and growth behaviour. It was found that, as the increase of the rotating frequency, the grains are fragmented and refined gradually until a transition from columnar to equiaxed microstructures happens at a rotating frequency of 40 Hz. Moreover, the Bi concentration of the primary phase decreases and macrosegregation is eliminated effectively with RMF. These are due to the effect of RMF on the nucleation, growth and fluid flow in the solidification process.


1965 ◽  
Vol 22 (3) ◽  
pp. 521-528 ◽  
Author(s):  
H. K. Moffatt

The interior of an insulating cylindrical container is supposed filled with an incompressible, electrically conducting, viscous fluid. An externally applied magnetic field is caused to rotate uniformly about an axis parallel to the cylinder generators (by applying two alternating components out of phase at right angles). Induced currents in the fluid give rise to a Lorentz force which drives a velocity field, which in general may have a steady and a fluctuating component. The particular case of a circular cylindrical container in a transverse magnetic field is studied in detail. Under certain reasonable assumptions, the resulting flow is shown to have only the steady component, and the distribution of this component is determined. Some conjectures are offered about the stability of this flow and about the corresponding flows in cavities of general shape.


2011 ◽  
Vol 688 ◽  
pp. 44-65 ◽  
Author(s):  
S. N. Khaderi ◽  
J. M. J. den Toonder ◽  
P. R. Onck

AbstractIn this work we study the effect of metachronal waves on the flow created by magnetically driven plate-like artificial cilia in microchannels using numerical simulations. The simulations are performed using a coupled magneto-mechanical solid–fluid computational model that captures the physical interactions between the fluid flow, ciliary deformation and applied magnetic field. When a rotating magnetic field is applied to super-paramagnetic artificial cilia, they mimic the asymmetric motion of natural cilia, consisting of an effective and recovery stroke. When a phase difference is prescribed between neighbouring cilia, metachronal waves develop. Due to the discrete nature of the cilia, the metachronal waves change direction when the phase difference becomes sufficiently large, resulting in antiplectic as well as symplectic metachrony. We show that the fluid flow created by the artificial cilia is significantly enhanced in the presence of metachronal waves and that the fluid flow becomes unidirectional. Antiplectic metachrony is observed to lead to a considerable enhancement in flow compared to symplectic metachrony, when the cilia spacing is small. Obstruction of flow in the direction of the effective stroke for the case of symplectic metachrony was found to be the key mechanism that governs this effect.


Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1804
Author(s):  
Piotr Mikolajczak

The solidification of AlCuSi alloys with Mn and Fe was studied by rotating a magnetic field to understand the effect of melt flow. The specimens solidified with a forced convection, low cooling rate and low temperature gradient. Electromagnetic stirring generated by an electric coil around the specimens caused a transformation from equiaxed dendritic to rosette morphology, occasionally with spheroids and minor dendrites. The transformation was quantitatively observed with a specific surface Sv, that decreased for almost all alloys and marked the flow effect on α-Al. The computer coupling of phase diagrams and thermochemistry (CALPHAD) technique was applied for the calculation of phase diagrams and property diagrams. Forced convection decreased secondary dendrite arm spacing λ2 in almost all alloys, while it increased slightly in one studied alloy. The length of detrimental β-Al5FeSi phases decreased in the alloy, where β starts to precipitate in the presence of α-Al, while increasing in alloys where β starts as first and grows in the fully liquid melt. The average overall dimension of the Mn-rich phases increased in almost all alloys, and the number density decreased under flow. The modification of spacing for AlSi-eutectics and Al2Cu was analyzed. It was found that the occurrence of Al2Cu does not influence the fluid flow and vice versa.


Author(s):  
О. Karlov ◽  
◽  
I. Kondratenko ◽  
R. Kryshchuk ◽  
A. Rashchepkin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document