On The Characterization Of Ice Particles In The Atmosphere

1983 ◽  
Author(s):  
John Hallett
Keyword(s):  
1961 ◽  
Vol 42 (7) ◽  
pp. 452-466 ◽  
Author(s):  
Roland List

All methods and instruments currently being used for the physical characterization of hailstones are listed and discussed. Apart from the simpler measurements of diameter, shape, roughness, surface temperature, etc., particular attention is paid to the aerodynamic forces acting on free-falling hailstones and to the way these forces are ascertained. Further paragraphs are devoted to the technique for obtaining thin sections and to their importance in explaining the growth of ice particles. The application of calorimeters and separators in demonstrating the presence of liquid water in the hailstones is also discussed. All these methods can be used for investigating artificially produced ice particles.


2017 ◽  
Vol 56 (7) ◽  
pp. 1827-1845 ◽  
Author(s):  
Fabian Senf ◽  
Hartwig Deneke

AbstractThe growth phase of convective storms and their transition to maturity is investigated based on more than 100 cases selected from the years 2012–14 over central Europe. Dynamical growth properties as well as cloud-top glaciation and microphysical characteristics are derived from the SEVIRI imaging radiometer aboard the geostationary Meteosat satellites. In addition, onset and intensity of surface precipitation are related to growth and glaciation processes using observations from the radar network of the German Weather Service. The majority of analyzed cases shows a distinct maximum in cloud-top cooling rate, which is used here for temporal synchronization. Cloud growth spans a period of approximately half an hour. Glaciation rate indicators suggest that freezing 15 min prior to the maximum cooling plays an important role in invigorating convective updrafts through the release of latent heat. Smaller ice particles are found for larger cloud-top cooling, which provides observational evidence that ice particles form later and have less time to grow in stronger convective updrafts. Furthermore, maximum cloud-top height, anvil expansion rate, maximum precipitation intensity, and core size are found to be positively correlated. With respect to the onset of precipitation, this analysis shows a high probability that significant precipitation already occurs 30 min prior to maximum cloud-top cooling.


2005 ◽  
Vol 44 (4) ◽  
pp. 385-415 ◽  
Author(s):  
Sandra E. Yuter ◽  
Robert A. Houze ◽  
Eric A. Smith ◽  
Thomas T. Wilheit ◽  
Edward Zipser

Abstract The Tropical Rainfall Measuring Mission (TRMM) Kwajalein Experiment (KWAJEX) was designed to obtain an empirical physical characterization of precipitating convective clouds over the tropical ocean. Coordinated datasets were collected by three aircraft, one ship, five upper-air sounding sites, and a variety of continuously recording remote and in situ surface-based sensors, including scanning Doppler radars, profilers, disdrometers, and rain gauges. This paper describes the physical characterization of the Kwajalein cloud population that has emerged from analyses of datasets that were obtained during KWAJEX and combined with long-term TRMM ground validation site observations encompassing three rainy seasons. The spatial and temporal dimensions of the precipitation entities exhibit a lognormal probability distribution, as has been observed over other parts of the tropical ocean. The diurnal cycle of the convection is also generally similar to that seen over other tropical oceans. The largest precipitating cloud elements—those with rain areas exceeding 14 000 km2—have the most pronounced diurnal cycle, with a maximum frequency of occurrence before dawn; the smallest rain areas are most frequent in the afternoon. The large systems exhibited stratiform rain areas juxtaposed with convective regions. Frequency distributions of dual-Doppler radar data showed narrow versus broad spectra of divergence in the stratiform and convective regions, respectively, as expected because strong up- and downdrafts are absent in the stratiform regions. The dual-Doppler profiles consistently showed low-level convergence and upper-level divergence in convective regions and midlevel convergence sandwiched between lower- and upper-level divergence in stratiform regions. However, the magnitudes of divergence are sensitive to assumptions made in classifying the radar echoes as convective or stratiform. This sensitivity implies that heating profiles derived from satellite radar data will be sensitive to the details of the scheme used to separate convective and stratiform rain areas. Comparison of airborne passive microwave data with ground-based radar data indicates that the pattern of scattering of 85-GHz radiance by ice particles in the upper portions of KWAJEX precipitating clouds is poorly correlated with the precipitation pattern at lower levels while the emission channels (10 and 19 GHz) have brightness temperature patterns that closely correspond to the lower-level precipitation structure. In situ ice particle imagery obtained by aircraft at upper levels (∼11 km) shows that the concentrations of ice particles of all densities are greater in the upper portions of active convective rain regions and lower in the upper portions of stratiform regions, probably because the active updrafts convey the particles to upper levels, whereas in the stratiform regions sedimentation removes the larger ice particles over time. Low-level aircraft flying in the rain layer show similar total drop concentrations in and out of convective cells, but they also show a sudden jump in the concentration of larger raindrops at the boundaries of the cells, indicating a discontinuity in growth processes such as coalescence at the cell boundary.


Author(s):  
Iheb Haffar ◽  
Pierre Latil ◽  
Frédéric Flin ◽  
Christian Geindreau ◽  
François Bonnel ◽  
...  

Author(s):  
B. L. Soloff ◽  
T. A. Rado

Mycobacteriophage R1 was originally isolated from a lysogenic culture of M. butyricum. The virus was propagated on a leucine-requiring derivative of M. smegmatis, 607 leu−, isolated by nitrosoguanidine mutagenesis of typestrain ATCC 607. Growth was accomplished in a minimal medium containing glycerol and glucose as carbon source and enriched by the addition of 80 μg/ ml L-leucine. Bacteria in early logarithmic growth phase were infected with virus at a multiplicity of 5, and incubated with aeration for 8 hours. The partially lysed suspension was diluted 1:10 in growth medium and incubated for a further 8 hours. This permitted stationary phase cells to re-enter logarithmic growth and resulted in complete lysis of the culture.


Author(s):  
A.R. Pelton ◽  
A.F. Marshall ◽  
Y.S. Lee

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.


Author(s):  
B. H. Kear ◽  
J. M. Oblak

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.


Author(s):  
R. E. Herfert

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.


Sign in / Sign up

Export Citation Format

Share Document