scholarly journals Commissioning and acceptance testing of a CyberKnife linear accelerator

2007 ◽  
Vol 8 (3) ◽  
pp. 119-125 ◽  
Author(s):  
Subhash C. Sharma ◽  
Joseph T. Ott ◽  
Jamone B. Williams ◽  
Danny Dickow
Keyword(s):  
Linear Accelerator ◽  
Acceptance Testing

scholarly journals Application of TG-100 risk analysis methods to the acceptance testing and commissioning process of a Halcyon linear accelerator

2019 ◽  
Vol 46 (3) ◽  
pp. 1341-1354 ◽  
Author(s):  
P. Troy Teo ◽  
Min-Sig Hwang ◽  
William Gary Shields ◽  
Pavel Kosterin ◽  
Si Young Jang ◽  
...  
Keyword(s):  
Risk Analysis ◽  
Linear Accelerator ◽  
Acceptance Testing ◽  
Analysis Methods

Injector for a 100-500 kV Linac Electron Microscopy Source

1967 ◽  
Vol 25 ◽  
pp. 274-275
Author(s):  
John W. Coleman
Keyword(s):  
Electron Microscopy ◽  
Linear Accelerator ◽  
Beam Current ◽  
Ion Trapping ◽  
University Of Virginia ◽  
Electron Injector ◽  
Illumination System ◽  
Radio Corporation Of America ◽  
The University ◽  
Optical Integration

The injector to be described is a component in the Electron Injector-Linear Accelerator—Condenser Module for illumination used on the variable 100-500kV electron microscope being built at the Radio Corporation of America for the University of Virginia.The injector is an independently powered, autonomous unit, operating at a constant 6kV positive with respect to accelerator potential, thereby making beam current independent of accelerator potential. The injector provides for on-axis ion trapping to prolong filament lifetime, and incorporates a derived Einzel lens for optical integration into the overall illumination system for microscopy. Electrostatic beam deflectors for alignment are an integral part of the apparatus. The entire injector unit is cantilevered off a door for side loading, and is topped with a 4-filament turret released electrically but driven by a self-contained Negator spring motor.

Developing a Web-based Application for Energy Supply Systems

2019 ◽  
Vol 2 (3) ◽  
pp. 164-169
Author(s):  
Mohammed Faza ◽  
Maulahikmah Galinium ◽  
Matthias Guenther
Keyword(s):  
Energy Supply ◽  
Power Plants ◽  
Acceptance Testing ◽  
Design Activity ◽  
Unit Testing ◽  
Validity Testing ◽  
Energy Supply System ◽  
Time Series Modelling ◽  
Supply Systems ◽  
Energy Supply Systems

An energy supply system consists of a system of power plants and transmission anddistribution systems that supply electrical energy. The present project is limited to the modellingof the generation system. Its objective is the design and implementation of a web-basedapplication for simulating energy supply systems using the Laravel framework. The projectfocuses on six modules representing geothermal energy, solar energy, biopower, hydropower,storage, and fossil-based energy that are allocated to satisfy a given power demand. It isexecuted as a time series modelling for an exemplary year with hourly resolution. Thedevelopment of the software is divided into four steps, which are the definition of the userrequirements, the system design (activity, use case, system architecture, and ERD), the softwaredevelopment, and the software testing (unit testing, functionality testing, validity testing, anduser acceptance testing). The software is successfully implemented. All the features of thesoftware work as intended. Also, the software goes through validity testing using three differentinput data, to make sure the software is accurate. The result of the testing is 100% accuracy withrespect to the underlying model that was implemented in an excel calculation.

Developing Food Sensory Analysis Information System using Waterfall Software Engineering Model

2017 ◽  
Vol 4 (2) ◽  
pp. 63-81
Author(s):  
Stefanus Oliver ◽  
Abdullah Muzi Marpaung ◽  
Maulahikmah Galinium
Keyword(s):  
Software Engineering ◽  
Sensory Analysis ◽  
Acceptance Testing ◽  
Design Activity ◽  
User Requirements ◽  
Human Errors ◽  
Web Based ◽  
Entity Relationship ◽  
Entity Relationship Diagram ◽  
Analysis System

Food sensory analysis is the terms from the field of Food Technology that has a meaning which means sensory evaluation of food that is conducted by the food sensory evaluators. Currently, food sensory analysis is conductedmanually. It can caus e human errors and consume much ti me. The objective of this research is to build a web based application that is specific for food sensory analysis using PHP programming language. This research followsfour first steps of waterfall software engineering mod el which are user requirements ana lysis (user software and requirements analysis), system design (activity, use cases, architecture, and entity relationship diagram),implementation (software development), and testing (software unit, functionality, validit y, and user acceptance testing). T he software result is well built. It is also acceptable for users and all functionality features can run well after going through those four software testing. The existence of the software brings easiness to deal with the manual food sensory analysis exper iment. It is considered also for the future it has business value by having open source and premium features.

Strategy comparison for space vehicles' active existence terms estimation during protracted acceptance testing

2001 ◽  
Vol 7 (1s) ◽  
pp. 15-18
Author(s):  
O.G. Baibuz ◽  
◽  
S.V. Zemlyanaya ◽  
F.A. Pristavka ◽  
◽  
...  
Keyword(s):  
Acceptance Testing ◽  
Space Vehicles

The measurement of photoneutron dose around an 18 MV Varian linear accelerator by TLD600 and TLD700 dosimeters inside the polyethylene sphere of neutron probe LB 6411

2014 ◽  
Vol 6 (1) ◽  
pp. 1049-1057
Author(s):  
Samiei F ◽  
Nedaie H A ◽  
Darestani H ◽  
Banaee N ◽  
Shagholi N ◽  
...  
Keyword(s):  
Linear Accelerator ◽  
Neutron Probe

Bremsstrahlung  X-rays  from  high-energy  linear    accelerators  (Linacs)  produce  neutrons  as  a  result  of  photonuclear  reactions  mainly  with  the  different  materials  constituting  the  accelerator  head.  The  neutrons  produced  during  high  energy  radiotherapy  should  be  considered  in  terms  of  protection  and  ose  escalation.  Due  to  the  very  intense  photon  component  in  the  Linac  field  causing  pulse  pile-up  and  dead-time  effects  in  detectors,  measurement  of  the  corresponding  neutron  dose  by  active  dosimeters  is  extremely  troublesome.  In  this  study,  the  neutron  probe  LB  6411,  which  active  detector  of  3He  proportional  counter  tube  was  replaced  with  the  passive  detectors  of  TLD600  and  TLD700,  has  been  used  to  perform  neutron  measurements  at  four  points  around  the  18  MV  Varian  2100C  Linac  facility.  The  neutron  dose  equivalent  at  the  distance  of  1  and  2  m  from  the  isocentre  on  the  patient  couch  was  obtained  2.2  and  0.75  mSv.Gy-1  respectively.  According  to  the  results,  the  dose  equivalent  from  emitted  photoneutrons  is  not  negligible  and  therefore  treatment  conditions  should  be  optimized.  The  results  of  this  study  emphasized  that  TLD600  and  TLD700  dosimeters  inside  the  polyethylene  sphere  of  neutron  probe  LB  6411  is  an  appropriate  choice  for  studying  photoneutron  production  in  the  vicinity  of  the  accelerator.

Dosimetric comparison of fractionated radiosurgery plans using frameless Gamma Knife ICON and CyberKnife systems with linear accelerator–based radiosurgery plans for multiple large brain metastases

2020 ◽  
Vol 132 (5) ◽  
pp. 1473-1479 ◽  
Author(s):  
Eun Young Han ◽  
He Wang ◽  
Dershan Luo ◽  
Jing Li ◽  
Xin Wang
Keyword(s):  
Brain Metastases ◽  
Gamma Knife ◽  
Linear Accelerator ◽  
Treatment Time ◽  
Target Volume ◽  
Planning System ◽  
Treatment Planning System ◽  
Normal Brain ◽  
Large Brain ◽  
The Mean

OBJECTIVEFor patients with multiple large brain metastases with at least 1 target volume larger than 10 cm3, multifractionated stereotactic radiosurgery (MF-SRS) has commonly been delivered with a linear accelerator (LINAC). Recent advances of Gamma Knife (GK) units with kilovolt cone-beam CT and CyberKnife (CK) units with multileaf collimators also make them attractive choices. The purpose of this study was to compare the dosimetry of MF-SRS plans deliverable on GK, CK, and LINAC and to discuss related clinical issues.METHODSTen patients with 2 or more large brain metastases who had been treated with MF-SRS on LINAC were identified. The median planning target volume was 18.31 cm3 (mean 21.31 cm3, range 3.42–49.97 cm3), and the median prescribed dose was 27.0 Gy (mean 26.7 Gy, range 21–30 Gy), administered in 3 to 5 fractions. Clinical LINAC treatment plans were generated using inverse planning with intensity modulation on a Pinnacle treatment planning system (version 9.10) for the Varian TrueBeam STx system. GK and CK planning were retrospectively performed using Leksell GammaPlan version 10.1 and Accuray Precision version 1.1.0.0 for the CK M6 system. Tumor coverage, Paddick conformity index (CI), gradient index (GI), and normal brain tissue receiving 4, 12, and 20 Gy were used to compare plan quality. Net beam-on time and approximate planning time were also collected for all cases.RESULTSPlans from all 3 modalities satisfied clinical requirements in target coverage and normal tissue sparing. The mean CI was comparable (0.79, 0.78, and 0.76) for the GK, CK, and LINAC plans. The mean GI was 3.1 for both the GK and the CK plans, whereas the mean GI of the LINAC plans was 4.1. The lower GI of the GK and CK plans would have resulted in significantly lower normal brain volumes receiving a medium or high dose. On average, GK and CK plans spared the normal brain volume receiving at least 12 Gy and 20 Gy by approximately 20% in comparison with the LINAC plans. However, the mean beam-on time of GK (∼ 64 minutes assuming a dose rate of 2.5 Gy/minute) plans was significantly longer than that of CK (∼ 31 minutes) or LINAC (∼ 4 minutes) plans.CONCLUSIONSAll 3 modalities are capable of treating multiple large brain lesions with MF-SRS. GK has the most flexible workflow and excellent dosimetry, but could be limited by the treatment time. CK has dosimetry comparable to that of GK with a consistent treatment time of approximately 30 minutes. LINAC has a much shorter treatment time, but residual rotational error could be a concern.

Functional stereotactic radiosurgery involving a dedicated linear accelerator and gamma unit: a comparison study

2004 ◽  
pp. 373-380 ◽  
Author(s):  
Timothy D. Solberg ◽  
Steven J. Goetsch ◽  
Michael T. Selch ◽  
William Melega ◽  
Goran Lacan ◽  
...  
Keyword(s):  
Stereotactic Radiosurgery ◽  
Linear Accelerator ◽  
Treatment Plan ◽  
Single Shot ◽  
Submillimeter Range ◽  
Primate Model ◽  
Content Type ◽  
Stereotactic Frame ◽  
Targeting Ability ◽  
Fine Print

Object. The purpose of this work was to investigate the targeting and dosimetric characteristics of a linear accelerator (LINAC) system dedicated for stereotactic radiosurgery compared with those of a commercial gamma knife (GK) unit. Methods. A phantom was rigidly affixed within a Leksell stereotactic frame and axial computerized tomography scans were obtained using an appropriate stereotactic localization device. Treatment plans were performed, film was inserted into a recessed area, and the phantom was positioned and treated according to each treatment plan. In the case of the LINAC system, four 140° arcs, spanning ± 60° of couch rotation, were used. In the case of the GK unit, all 201 sources were left unplugged. Radiation was delivered using 3- and 8-mm LINAC collimators and 4- and 8-mm collimators of the GK unit. Targeting ability was investigated independently on the dedicated LINAC by using a primate model. Measured 50% spot widths for multisource, single-shot radiation exceeded nominal values in all cases by 38 to 70% for the GK unit and 11 to 33% for the LINAC system. Measured offsets were indicative of submillimeter targeting precision on both devices. In primate studies, the appearance of an magnetic resonance imaging—enhancing lesion coincided with the intended target. Conclusions. Radiosurgery performed using the 3-mm collimator of the dedicated LINAC exhibited characteristics that compared favorably with those of a dedicated GK unit. Overall targeting accuracy in the submillimeter range can be achieved, and dose distributions with sharp falloff can be expected for both devices.

Sign in / Sign up

Export Citation Format

Share Document