scholarly journals Light, strong, and stable nanoporous aluminum with native oxide shell

2021 ◽  
Vol 7 (28) ◽  
pp. eabb9471
Author(s):  
Wei Yang ◽  
Zhao-Ping Luo ◽  
Wei-Kang Bao ◽  
Hui Xie ◽  
Ze-Sheng You ◽  
...  
Keyword(s):  
High Strength ◽  
Native Oxide ◽  
Oxide Shell ◽  
Galvanic Replacement ◽  
Self Healing ◽  
Ambient Conditions ◽  
Structural Applications ◽  
Nanoporous Metals ◽  
Scalable Synthesis ◽  
Similar Density

Aluminum (Al) metal is highly reactive but has excellent corrosion resistance because of the formation of a self-healing passive oxide layer on the surface. Here, we report that this native aluminum oxide shell can also stabilize and strengthen porous Al when the ligament (strut) size is decreased to the submicron or nanometer scale. The nanoporous Al with native oxide shell, which is a nanoporous Al-Al2O3 core-shell composite self-organized in a galvanic replacement reaction, is nonflammable under ambient conditions and stable against coarsening near melting temperatures. This material is stronger than conventional foams of similar density consisting of pure Al or Al-based composites, and also lighter and stronger than most nanoporous metals reported previously. Its light weight, high strength, and excellent stability warrant the explorations of functional and structural applications of this material, if more efficient and scalable synthesis processes are developed in the future.

In situ observation of the martensitic transformation in (Mg,Y)-PSZ

1986 ◽  
Vol 44 ◽  
pp. 500-501
Author(s):  
R-R. Lee
Keyword(s):  
Martensitic Transformation ◽  
High Strength ◽  
Nucleation And Growth ◽  
In Situ Observation ◽  
Considerable Potential ◽  
Transmission Electron ◽  
Structural Applications ◽  
Applied Stresses ◽  
Kinetics Of

Partially-stabilized ZrO2 (PSZ) ceramics have considerable potential for advanced structural applications because of their high strength and toughness. These properties derive from small tetragonal ZrO2 (t-ZrO2) precipitates in a cubic (c) ZrO2 matrix, which transform martensitically to monoclinic (m) symmetry under applied stresses. The kinetics of the martensitic transformation is believed to be nucleation controlled and the nucleation is always stress induced. In situ observation of the martensitic transformation using transmission electron microscopy provides considerable information about the nucleation and growth aspects of the transformation.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

UNS A97075

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Structural Applications ◽  
Structural Parts ◽  
Very High

Abstract UNS No. A97075 is a wrought precipitation-hardenable aluminum alloy. It has excellent mechanical properties, workability and response to heat treatment and refrigeration. Its typical uses comprise aircraft structural parts and other highly stressed structural applications where very high strength and good resistance to corrosion are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low temperature performance as well as forming, heat treating, and machining. Filing Code: Al-269. Producer or source: Various aluminum companies.

AISI No. 633

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Martensitic Stainless Steels ◽  
Steel Mills ◽  
Temperature Performance ◽  
Structural Applications

Abstract AISI No. 633 is a chromium-nickel-molybdenum stainless steel whose properties can be changed by heat treatment. It bridges the gap between the austenitic and martensitic stainless steels; that is, it has some of the properties of each. Its uses include high-strength structural applications, corrosion-resistant springs and knife blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-389. Producer or source: Stainless steel mills.

FERRIUM M54

Alloy Digest ◽  
2018 ◽  
Vol 67 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
High Resistance ◽  
High Strength ◽  
Cost Effective ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Structural Applications ◽  
Resistance To Stress

Abstract Ferrium M54 was designed to create a cost-effective, ultra high-strength, high-fracture toughness material with a high resistance to stress-corrosion cracking for use in structural applications. This datasheet provides information on composition, hardness, and tensile properties as well asfatigue. Filing Code: SA-822. Producer or source: QuesTek Innovations, LLC.

scholarly journals Compressive behaviours of octet-truss lattices

2020 ◽  
Vol 234 (16) ◽  
pp. 3257-3269 ◽  
Author(s):  
Yifan Li ◽  
Huaiyuan Gu ◽  
Martyn Pavier ◽  
Harry Coules
Keyword(s):  
Failure Modes ◽  
Density Ratio ◽  
Three Dimensional ◽  
Compressive Load ◽  
High Strength ◽  
Detailed Comparison ◽  
Compressive Response ◽  
Beam Elements ◽  
Structural Applications ◽  
Octet Truss

Octet-truss lattice structures can be used for lightweight structural applications due to their high strength-to-density ratio. In this research, octet-truss lattice specimens were fabricated by stereolithography additive manufacturing with a photopolymer resin. The mechanical properties of this structure have been examined in three orthogonal orientations under the compressive load. Detailed comparison and description were carried out on deformation mechanisms and failure modes in different lattice orientations. Finite element models using both beam elements and three-dimensional solid elements were used to simulate the compressive response of this structure. Both the load reaction and collapse modes obtained in simulations were compared with test results. Our results indicate that three-dimensional continuum element models are required to accurately capture the behaviour of real trusses, taking into account the effects of finite-sized beams and joints.

scholarly journals Rapid synchronized fabrication of vascularized thermosets and composites

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Mayank Garg ◽  
Jia En Aw ◽  
Xiang Zhang ◽  
Polette J. Centellas ◽  
Leon M. Dean ◽  
...  
Keyword(s):  
Large Scale ◽  
Capillary Flow ◽  
External Heat ◽  
Frontal Polymerization ◽  
Self Healing ◽  
Vascular Networks ◽  
Ambient Conditions ◽  
External Energy ◽  
Imaging Phantoms ◽  
Vascular Structures

AbstractBioinspired vascular networks transport heat and mass in hydrogels, microfluidic devices, self-healing and self-cooling structures, filters, and flow batteries. Lengthy, multistep fabrication processes involving solvents, external heat, and vacuum hinder large-scale application of vascular networks in structural materials. Here, we report the rapid (seconds to minutes), scalable, and synchronized fabrication of vascular thermosets and fiber-reinforced composites under ambient conditions. The exothermic frontal polymerization (FP) of a liquid or gelled resin facilitates coordinated depolymerization of an embedded sacrificial template to create host structures with high-fidelity interconnected microchannels. The chemical energy released during matrix polymerization eliminates the need for a sustained external heat source and greatly reduces external energy consumption for processing. Programming the rate of depolymerization of the sacrificial thermoplastic to match the kinetics of FP has the potential to significantly expedite the fabrication of vascular structures with extended lifetimes, microreactors, and imaging phantoms for understanding capillary flow in biological systems.

A self-healable, stretchable, tear-resistant and sticky elastomer enabled by a facile polymer blends strategy

2021 ◽  
Vol 9 (7) ◽  
pp. 3931-3939
Author(s):  
Shiqiang Song ◽  
Honghao Hou ◽  
Jincheng Wang ◽  
Pinhua Rao ◽  
Yong Zhang
Keyword(s):  
Polymer Blends ◽  
High Strength ◽  
Self Healing ◽  
Potential Applications ◽  
Physical Blending

A high-stretchability, high-strength, tear-resistant, self-healing and adhesive elastomer is prepared through a facile and effective physical blending strategy. The elastomer shows potential applications in e-skin devices.

scholarly journals Boron Concentration Induced Co-Ta-B Composite Formation Observed in the Transition from Metallic to Covalent Glasses

2020 ◽  
Vol 5 (1) ◽  
pp. 18
Author(s):  
Simon Evertz ◽  
Stephan Prünte ◽  
Lena Patterer ◽  
Amalraj Marshal ◽  
Damian M. Holzapfel ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Metallic Glasses ◽  
Boron Concentration ◽  
High Strength ◽  
Point Of View ◽  
Composite Formation ◽  
Structural Applications ◽  
Glassy Materials ◽  
Metallic Bonding ◽  
Composite Region

Due to their unique property combination of high strength and toughness, metallic glasses are promising materials for structural applications. As the behaviour of metallic glasses depends on the electronic structure which in turn is defined by chemical composition, we systematically investigate the influence of B concentration on glass transition, topology, magnetism, and bonding for B concentrations x = 2 to 92 at.% in the (Co6.8±3.9Ta)100−xBx system. From an electronic structure and coordination point of view, the B concentration range is divided into three regions: Below 39 ± 5 at.% B, the material is a metallic glass due to the dominance of metallic bonds. Above 69 ± 6 at.%, the presence of an icosahedra-like B network is observed. As the B concentration is increased above 39 ± 5 at.%, the B network evolves while the metallic coordination of the material decreases until the B concentration of 67 ± 5 at.% is reached. Hence, a composite is formed. It is evident that, based on the B concentration, the ratio of metallic bonding to icosahedral bonding in the composite can be controlled. It is proposed that, by tuning the coordination in the composite region, glassy materials with defined plasticity and processability can be designed.

Preparation and characterization of double network hydrogel with high-strength and self-healing

2021 ◽  
pp. 102450
Author(s):  
Shubin Li ◽  
Xiao Wang ◽  
Jiang Zhu ◽  
Zhenyu Wang ◽  
Lu Wang
Keyword(s):  
High Strength ◽  
Self Healing ◽  
Double Network
Sign in / Sign up

Export Citation Format

Share Document