Syn- and postintrusive deformation at the northern margin of the Rieserferner plutonic complex (Eastern Alps): strain partitioning during emplacement and cooling of granitoids

2004 ◽  
Vol 154 (4) ◽  
pp. 497-517
Author(s):  
Dirk Scheuvens ◽  
Andreas Mann
2021 ◽  
Author(s):  
Tuo Shen ◽  
Xiwei Xu ◽  
Shiyong Zhou ◽  
Shaogang Wei ◽  
Xiaoqiong Lei

<p>In recent decades, plateau margins have attracted attention because the understanding of their dynamics and history provides insights into the modes of crustal deformation responsible for the plateau structure and morphology and more widely into the deformation of continental lithosphere. The slip transformation and strain partitioning mechanism at the eastern termination of the Kunlun fault system remain unclear. Geophysics investigations revealed the Ruoergai Basin as a rigid block; however, insufficient information is available on the role of this block in tectonic transformation zone at east Tibet. We employed the finite element method in our simulations to delimitate the presence of the Ruoergai block and determine how it affects the surrounding area. We found that the Ruoergai block moves independently to the east or northeast, and its motion differs from that of the Bayan Har block in the eastward escape process of this last-named block. The formation and behavior of Awancang fault and Longriba fault seems to impact by the Ruoergai block. The influence of the Ruoergai block in the east margin should not be ignored. The Awancang fault and Ruoergai block absorbed the north vector velocity of the Bayan Har block, after which the Bayan Har block started moving southeast. The strain partitioning at the eastern margin of the Tibet Plateau is progressively complete[A1]  from the Awancang fault, Ruoergai block, and Longriba fault area to the Longmenshan block. The presence of the Ruoergai block could decrease the strike-slip rate of the Maqin–Maqu section of the Kunlun fault. Given its influence in the region, the Ruoergai block should be incorporated in future studies on regional deformation and in deformation and tectonic transformation models. Then we compared the deformation and tectonic transformation models in the northern margin of the Tibet Plateau. Proposed a rigid block compression pattern unite the tectonic transformation and deformation issue, further explain most of the fault behaviors in the northern margin and eastern margin of Tibet.</p><p> </p>


2005 ◽  
Vol 142 (1) ◽  
pp. 1-5 ◽  
Author(s):  
IGINIO DIENI ◽  
DANILO GIORDANO ◽  
DAVID K. LOYDELL ◽  
FRANCESCO P. SASSI

We report the discovery of Aeronian (Middle Llandovery) graptolites, and corals of probable Devonian age, in boudins hosted by greenschists, within the Southalpine Metamorphic Basement. These discoveries provide key constraints to the depositional age range of the protoliths. This remarkable occurrence of almost undeformed graptolites and compound corals in boudins within a metamorphic shear zone indicates very marked local strain partitioning.


2021 ◽  
Author(s):  
Qianwen Huang ◽  
Yongjiang Liu ◽  
Johann Genser ◽  
Franz Neubauer ◽  
Sihua Yuan ◽  
...  

<p>The pre-Mesozoic basements in the Eastern Alps overprinted by the Variscan and alpine metamorphism (Neubauer and Frisch, 1993), which still remained the pre-Variscan tectonic evolution evidences. Many of these basements left away from their lithospheric roots due to large-scale tectonic activities (von Raumer et al., 2001), whereas their origin and tectonic history can be recorded by detailed geochemistry and geochronology. Here we present a study on the Schladming Complex, one part of Silvretta-Seckau nappe system in Austroalpine Unit, that located in the northern part of Alps to discuss their ages, origin, and tectonic relationship with the Proto-Tethys Ocean.</p><p>The Schladming Complex basement mainly comprises biotite-plagioclase gneiss, hornblende-gneiss, mica-schists, together with some amphibolites, orthogneisses, paragneisses, metagabbro and migmatites, which covered by sequence of metasedimentary (Slapansky and Frank, 1987). It underwent the medium- to high-grade metamorphism during the Variscan event and is overprinted by the greenschist facies metamorphism during the Alpine orogeny (Slapansky and Frank, 1987).</p><p>Granodioritic gneisses (539~538 Ma) and fine-grained amphibolite (531±2 Ma) in the basement represent a bimodal magmatism. Geochemical data show that the granodioritic gneisses belong to A<sub>2</sub>-type granite and originated from the lower crust, while the fine-grained amphibolites have an E-MORB affinity and the magma origined from the lithospheric mantle and contaminated by the arc-related materials. The data implies that the Schladming Complex formed in a back-arc rift tectonic setting in the Early Cambrian.</p><p>A medium-grained amphibolite gives an age of 495±5 Ma, exhibits ocean island basalt-like geochemical features and zircons positive εHf(t) values (+5.3~+10.9) indicating that the medium-grained amphibolite derived from a depleted mantle source. The monzonite granitic gneiss and plagioclase gneiss yields ages of 464±4 Ma for and 487±3 Ma, respectively. The monzonite granitic gneiss derived from the mixing of melts derived from pelitic and metaluminous rocks. The protolith of plagioclase gneiss is aplite, which has positive εHf(t) values of +5.9~+7.9, indicating it derived from the lower crust sources. The monzonite granitic gneiss and plagioclase gneiss exhibit S-type and I-type geochemical features, respectively. They are geochemically similar to the volcanic arc granite.</p><p>In summary, our data presents record of the Cambrian to Ordovician magmatism in the Schladming Complex, which provided new evidence of tectonic evolution history between Proto-Tethys and Gondwana. According to the data, we proposed that a series of rift developed in the northern margin of Gondwana during 540-530 Ma, the rifts continually expanded into a back-arc ocean in ~490 Ma and was closed around 460 Ma with S-type granitic magma intruded.</p><p><strong>References</strong></p><p>Neubauer, F., Frisch, W. 1993. The Austroalpine metamorphic basement east of the Tauern window.  In: Raumer, J. von & Neubauer, F. (eds.): Pre-Mesozoic Geology in the Alps. Berlin (Springer), pp. 515–536.</p><p>von Raumer, J., Stampfli, G., Borel, G., Bussy, F., 2001. Organization of pre-Variscan basement areas at the north-Gondwanan margin. International Journal of Earth Sciences 91, 35-52.</p><p>Slapansky, P., Frank, W. 1987. Structural evolution and geochronology of the northern margin of the Austroalpine in the northwestern Schladming crystalline (NE Tadstädter Tauern). In: Flügel, H. W. & Faupl, P. (eds.), Geodynamics of the Eastern Alps, pp. 244-262.</p>


2021 ◽  
Author(s):  
Michel Bestmann ◽  
Giorgio Pennacchioni ◽  
Bernhard Grasemann ◽  
Christoph Schrank

<p>In the last 10 years, many attempts have been mad to use the titanium-in-quartz geothermobarometer (TitaniQ) to constrain the ambient conditions during mylonitization of quartz in metamorphic rocks. However, most of the studies have shown that the TitaniQ is not readily applicable. First, the application of the TitaniQ calibrations<sup>1-2</sup> is possible if two of the relevant variables (temperature, pressure and Ti activity) can be fixed. But the results of both calibrations can deviate by >100°C. Secondly, several studies have shown that deformation/recrystallization processes, the availability of aqueous fluids, the amount of strain and the duration of deformation result in microstructures with a heterogeneous distribution of Ti concentrations [Ti]. Therefore, in most cases, homogenous and complete equilibration of the [Ti] at the ambient conditions of deformation does not occur. In quartz mylonites, the microstructure is commonly complex as result of strain partitioning and total accumulated strain. For such a complex rock the challenge for applying TitaniQ is to identify those domains where Ti re-equilibration to the syn-kinematic ambient conditions, did possibly occur. Identifying such domains requires the strict integration of correlated high-resolution analysis by optical microscopy, SEM-CL, EBSD and Ti-in-qtz analysis using secondary ion mass spectrometry (SIMS). This integrated information especially provides a robust interpretative tool for the interplay between grain-scale deformation, fluid-rock interaction, geochemical exchange and the evolution of the crystallographic preferred orientation during progressive strain.</p><p>We present the study of the deformation microstructures of quartz veins (Schober Group, Eastern Alps) as key example of such an integrated data collection to unravel characteristic deformation processes responsible for the partial or complete resetting of the Ti-in-quartz system under retrograde conditions. The Schober quartz veins developed at amphibolite facies conditions (510-590 °C, 0.5-0.6 GPa) and were overprinted by deformation at lower greenschist facies. Subgrain rotation (SGR) recrystallization was the dominant recrystallization mechanism during mylonitization. During deformation complete resetting of the initial [Ti] of 3-4 ppm down to 0.2-0.6 ppm occurred in domains (e.g. pressure shadows) where sufficient fluids were available and could percolate through the microstructures. High strain and pervasive quartz dynamic recrystallization did not necessarily result in homogeneous and complete re-equilibration of the [Ti]. Our study reveals that subgrain boundaries were locally pathways for partial [Ti] reset.</p><p>Using the example of mylonitized quartz veins from the Schober Group in the Austroalpine domain of the Eastern Alps, we aim at showing that the initial Ti-in-qtz and corresponding CL signature of the quartz vein is reset to different degrees even at high strains and pervasive dynamic recrystallization, depending on the availability of fluids and its repartitioning.</p><p> </p><p>(1) Huang, R., Audétat, A., 2012. The titanium-in-quartz (TitaniQ) thermobarometer: a critical examination and re-calibration. Geochim. Cosmochim. Acta 84, 75–89.</p><p>(2) Thomas, J.B., Watson, E.B., Spear, F.S., Shemella, P.T., Nayak, S.K., Lanzirozzi, A., 2010. TitaniQ under pressure: the effect of pressure and temperature on the solubility of Ti in quartz. Contrib. Mineral. Petrol. 160, 743–759.</p><p> </p>


2009 ◽  
Vol 469 (1-4) ◽  
pp. 93-111 ◽  
Author(s):  
Jiří Žák ◽  
František Dragoun ◽  
Kryštof Verner ◽  
Marta Chlupáčová ◽  
František V. Holub ◽  
...  

Lithos ◽  
2021 ◽  
Vol 388-389 ◽  
pp. 106064
Author(s):  
Qianwen Huang ◽  
Johann Genser ◽  
Yongjiang Liu ◽  
Franz Neubauer ◽  
Sihua Yuan ◽  
...  

Author(s):  
V. C. Thakur

ABSTRACTThe Indus-Tsangpo suture and its adjoining tectonic zones are well displayed in the Ladakh Himalayas where four tectonic zones have been distinguished, viz. the Zanskar, Indus suture, Shyok suture and Karakoram zones. The Zanskar zone is made up of Precambrian basement of the Zanskar crystalline complex and overlying Phanerozic sediments including Upper Palaeozoic volcanic rocks of the Zanskar Supergroup; they form the northern margin of the Indian plate. The Indus suture zone consists of a remnant of tectonised oceanic lithosphere represented by the Shergol melange and the Nidar complex with a former volcanic arc indicated by the volcanogenic Dras and Khardung formations and the Ladakh plutonic complex. The Shyok suture zone does not represent a tectonic repetition of the Indus suture; it is interpreted as a relic of a back-arc basin. The Karakoram plutonic complex appears to be genetically related to the Ladakh plutonic complex; both were generated from the subducting Indian oceanic plate. It is proposed that the boundary between the Indian and Eurasian plates does not lie along the Indus and Shyok sutures, but is located further N at the junction of Central Pamir (Alpine-Himalayan) and North Pamir (Hercynian).


Sign in / Sign up

Export Citation Format

Share Document