scholarly journals Acyl-Substituted Dermaseptin S4 Derivatives with Improved Bactericidal Properties, Including on Oral Microflora

2006 ◽  
Vol 50 (12) ◽  
pp. 4153-4160 ◽  
Author(s):  
Y. Porat ◽  
K. Marynka ◽  
A. Tam ◽  
D. Steinberg ◽  
A. Mor
Keyword(s):  
Amino Acids ◽  
Fatty Acids ◽  
Laser Scanning ◽  
Culture Media ◽  
Antibacterial Properties ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Oral Diseases ◽  
Bactericidal Properties ◽  
Oral Pathogens

ABSTRACT The 15-mer dermaseptin S4 derivative S4(1-15) was recently shown to exhibit potent activity against oral pathogens associated with caries and periodontitis. Here, we investigated possible modes for improving the peptide's properties through systematic replacement of an N-terminal amino acid(s) with various fatty acids that modulate the peptide's hydrophobicity and/or charge. Deletion of 1 to 3 residues led to progressive loss of potency as assessed by MIC experiments performed on four test bacteria. Replacing the deleted amino acids with fatty acids most often resulted in potency recovery or improvement, as evidenced by lower MICs and faster bactericidal kinetics in culture media. Best results were obtained after replacement of the N-terminal dipeptide alanine-leucine with heptanoic (C7) or aminododecanoic (NC12) acid. Circular dichroism analysis correlated antibacterial properties to the peptide's secondary structure. MIC experiments and confocal laser scanning microscopy results indicated that C7-S4(3-15) and NC12-S4(3-15) were bactericidal to various oral pathogens, including those which are immobilized in a biofilm. C7-S4(3-15) performed similarly to or better than (depending on growth medium) IB-367, a peptide assessed in clinical trials for treatment of oral mucositis, reducing CFU counts by >3 log units within 2 min of incubation. Collectively, the data indicate that substitution of fatty acids for amino acids may be a useful strategy in revealing improved derivatives of known antimicrobial peptides and suggest the suitability of such compounds for controlling pathogens associated with oral diseases.

scholarly journals Staphylococcus aureus Interferes with Streptococci Spatial Distribution and with Protein Expression of Species within a Polymicrobial Oral Biofilm

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 116
Author(s):  
Etyene Schnurr ◽  
Pune N. Paqué ◽  
Thomas Attin ◽  
Paolo Nanni ◽  
Jonas Grossmann ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Laser Scanning ◽  
Bacterial Species ◽  
Fusobacterium Nucleatum ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Oral Diseases ◽  
Streptococcus Oralis ◽  
Oral Environment ◽  
Associated Species

We asked whether transient Staphylococcus aureus in the oral environment synergistically interacts with orally associated bacterial species such as Actinomyces oris, Candida albicans, Fusobacterium nucleatum, Streptococcus oralis, Streptococcus mutans, and Veillonella dispar (six-species control biofilm 6S). For this purpose, four modified biofilms with seven species that contain either the wild type strain of the S. aureus genotype (USA300-MRSA WT), its isogenic mutant with MSCRAMM deficiency (USA300-MRSA ΔMSCRAMM), a methicillin-sensitive S. aureus (ST72-MSSA-) or a methicillin-resistant S. aureus (USA800-MRSA) grown on hydroxyapatite disks were examined. Culture analyses, confocal-laser-scanning microscopy and proteome analyses were performed. S. aureus strains affected the amount of supragingival biofilm-associated species differently. The deletion of MSCRAMM genes disrupted the growth of S. aureus and the distribution of S. mutans and S. oralis within the biofilms. In addition, S. aureus caused shifts in the number of detectable proteins of other species in the 6S biofilm. S. aureus (USA300-MRSA WT), aggregated together with early colonizers such as Actinomyces and streptococci, influenced the number of secondary colonizers such as Fusobacterium nucleatum and was involved in structuring the biofilm architecture that triggered the change from a homeostatic biofilm to a dysbiotic biofilm to the development of oral diseases.

scholarly journals Multiparameter Assessments To Determine the Effects of Sugars and Antimicrobials on a Polymicrobial Oral Biofilm

2006 ◽  
Vol 72 (10) ◽  
pp. 6734-6742 ◽  
Author(s):  
Ying Yang ◽  
Prem K. Sreenivasan ◽  
Ravi Subramanyam ◽  
Diane Cummins
Keyword(s):  
Nucleic Acids ◽  
Oral Hygiene ◽  
Laser Scanning ◽  
Sodium Lauryl Sulfate ◽  
Extracellular Polymeric Substances ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Lauryl Sulfate ◽  
Oral Diseases ◽  
Multiparameter Analysis

ABSTRACT Clinical studies indicate relationships between dental plaque, a naturally formed biofilm, and oral diseases. The crucial role of nonmicrobial biofilm constituents in maintaining biofilm structure and biofilm-specific attributes, such as resistance to shear and viscoelasticity, is increasingly recognized. Concurrent analyses of the diverse nonmicrobial biofilm components for multiparameter assessments formed the focus of this investigation. Comparable numbers of Actinomyces viscosus, Streptococcus sanguinis, Streptococcus mutans, Neisseria subflava, and Actinobacillus actinomycetemcomitans cells were seeded into multiple wells of 96-well polystyrene plates for biofilm formation. Quantitative fluorescence and confocal laser scanning microscopy (CLSM) examined the influences of dietary sugars, incubation conditions, ingredients in oral hygiene formulations, and antibiotics on biofilm components. Biofilm extracellular polymeric substances (EPS) were examined with an optimized mixture of fluorescent lectins, with biofilm proteins, lipids, and nucleic acids detected with specific fluorescent stains. Anaerobic incubation of biofilms resulted in significantly more biofilm EPS and extractable carbohydrates than those formed under aerobic conditions (P < 0.05). Sucrose significantly enhanced biofilm EPS in comparison to fructose, galactose, glucose, and lactose (P < 0.05). CLSM demonstrated thicker biofilms under sucrose-replete conditions, along with significant increases in biofilm EPS, proteins, lipids, and nucleic acids, than under conditions of sucrose deficiency (P < 0.05). Agents in oral hygiene formulations (chlorhexidine, ethanol, and sodium lauryl sulfate), a mucolytic agent (N-acetyl-l-cysteine), and antibiotics with different modes of action (amoxicillin, doxycycline, erythromycin, metronidazole, and vancomycin) inhibited biofilm components (P < 0.05). Multiparameter analysis indicated a dose-dependent inhibition of biofilm EPS and protein by chlorhexidine and sodium lauryl sulfate, along with distinctive inhibitory patterns for subinhibitory concentrations of antibiotics. Collectively, these results highlight multiparameter assessments as a broad platform for simultaneous assessment of diverse biofilm components.

scholarly journals Antibacterial Effect of the Natural Polymer ε-Polylysine Against Oral Pathogens Associated with Periodontitis and Caries

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1218 ◽  
Author(s):  
Shinechimeg Dima ◽  
Yin-Yin Lee ◽  
Ikki Watanabe ◽  
Wei-Jen Chang ◽  
Yu-Hua Pan ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Bacterial Resistance ◽  
Antibacterial Effect ◽  
Viable Cell ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Suspension ◽  
Natural Substances ◽  
Cell Counts ◽  
Oral Pathogens

Antimicrobials are important adjuncts in the treatment of caries and periodontitis. However, increased bacterial resistance and hypersensitivity reactions to commonly used antimicrobials have led to an increasing demand for safe and natural substances. The objective of this study was to investigate the antibacterial effects of ε-polylysine against oral pathogens Streptococcus mutans and Porphyromonas gingivalis. Broth dilution assay, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) analyses were performed to explore the antibacterial effect of ε-polylysine against S. mutans strain ATCC25175 and P. gingivalis strain ATCC332277. For the test solution, ε-polylysine was added to the bacterial suspension to prepare 0.125%, 0.25%, 0.5% and 1% ε-polylysine solutions diluted in broth medium. All four concentrations demonstrated complete inhibition of S. mutans and significantly reduced viable cell counts of P. gingivalis after 24 h. From starting inoculum of 9.15 log CFU/mL, P. gingivalis cell counts reduced to 4.01 log CFU/mL in the 0.125% ε-polylysine treatment group. SEM, CLSM, and the LIVE/DEAD bacterial assay of ε-polylysine application on P. gingivalis biofilm-dentin specimens revealed bacterial cell membrane disruption and irregular cell morphologies. The results indicated satisfactory antibacterial efficacy of ε-polylysine against P. gingivalis and S. mutans in liquid medium and as an application on biofilm-dentin specimens.

scholarly journals Bacterial Growth on Chitosan-Coated Polypropylene Textile

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
D. Erben ◽  
V. Hola ◽  
J. Jaros ◽  
J. Rahel
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Antibacterial Properties ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Aqueous Environment ◽  
Bacterial Enumeration ◽  
Pressure Development ◽  
Barrier Discharge Plasma ◽  
Biofilm Structure

Biofouling is a problem common in all systems where microorganisms and aqueous environment meet. Prevention of biofouling is therefore important in many industrial processes. The aim of this study was to develop a method to evaluate the ability of material coating to inhibit biofilm formation. Chitosan-coated polypropylene nonwoven textile was prepared using dielectric barrier discharge plasma activation. Resistance of the textile to biofouling was then tested. First, the textile was submerged into a growth medium inoculated with green fluorescein protein labelled Pseudomonas aeruginosa. After overnight incubation at 33°C, the textile was observed using confocal laser scanning microscopy for bacterial enumeration and biofilm structure characterisation. In the second stage, the textile was used as a filter medium for prefiltered river water, and the pressure development on the in-flow side was measured to quantify the overall level of biofouling. In both cases, nontreated textile samples were used as a control. The results indicate that the chitosan coating exhibits antibacterial properties. The developed method is applicable for the evaluation of the ability to inhibit biofilm formation.

scholarly journals Biofunctionalization of Microgroove Surfaces with Antibacterial Nanocoatings

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yingzhen Lai ◽  
Zhiqiang Xu ◽  
Jiang Chen ◽  
Renbin Zhou ◽  
Jumei Tian ◽  
...  
Keyword(s):  
Cell Proliferation ◽  
Antibacterial Activity ◽  
Magnetron Sputtering ◽  
Laser Scanning ◽  
Antibacterial Properties ◽  
Laser Scanning Microscopy ◽  
Cell Counting ◽  
Contact Guidance ◽  
Confocal Laser ◽  
Coated Surfaces

Objectives. To investigate the physical properties of the modified microgroove (MG) and antibacterial nanocoated surfaces. In addition, the biological interactions of the modified surfaces with human gingival fibroblasts (HGFs) and the antibacterial activity of the surfaces against Porphyromonas gingivalis were studied. Methods. The titanium nitride (TiN) and silver (Ag) coatings were deposited onto the smooth and MG surfaces using magnetron sputtering. A smooth titanium surface (Ti-S) was used as the control. The physicochemical properties including surface morphology, roughness, and hydrophilicity were characterized using scanning electron microscopy, atomic force microscopy, and an optical contact angle analyzer. The “contact guidance” morphology was assessed using confocal laser scanning microscopy. Cell proliferation was analyzed using the Cell Counting Kit-8 assay. The expression level of the main focal adhesion-related structural protein vinculin was compared using quantitative reverse transcription PCR and Western blotting. The antibacterial activity against P. gingivalis was evaluated using the LIVE/DEAD BacLight™ Bacterial Viability Kit. Results. The Ag and TiN antibacterial nanocoatings were successfully deposited onto the smooth and MG surfaces using magnetron sputtering technology. TiN coating on a grooved surface (TiN-MG) resulted in less nanoroughness and greater surface hydrophilicity than Ag coating on a smooth surface (Ag-S), which was more hydrophobic. Cell proliferation and expression of vinculin were higher on the TiN-MG surface than on the Ag-coated surfaces. Ag-coated surfaces showed the strongest antibacterial activity, followed by TiN-coated surfaces. Conclusion. Nano-Ag coating resulted in good antimicrobial activity; however, the biocompatibility was questionable. TiN nanocoating on an MG surface showed antibacterial properties with an optimal biocompatibility and maintained the “contact guidance” effects for HGFs.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

Vacuoles Induced in Mammalian Cells by Helicobacter Cytotoxin are Acidic Organelles

1990 ◽  
Vol 48 (3) ◽  
pp. 168-169
Author(s):  
M. H. Chestnut ◽  
C. E. Catrenich
Keyword(s):  
Acridine Orange ◽  
Mammalian Cells ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ulcer Disease ◽  
Gastroduodenal Disease ◽  
H Pylori

Helicobacter pylori is a non-invasive, Gram-negative spiral bacterium first identified in 1983, and subsequently implicated in the pathogenesis of gastroduodenal disease including gastritis and peptic ulcer disease. Cytotoxic activity, manifested by intracytoplasmic vacuolation of mammalian cells in vitro, was identified in 55% of H. pylori strains examined. The vacuoles increase in number and size during extended incubation, resulting in vacuolar and cellular degeneration after 24 h to 48 h. Vacuolation of gastric epithelial cells is also observed in vivo during infection by H. pylori. A high molecular weight, heat labile protein is believed to be responsible for vacuolation and to significantly contribute to the development of gastroduodenal disease in humans. The mechanism by which the cytotoxin exerts its effect is unknown, as is the intracellular origin of the vacuolar membrane and contents. Acridine orange is a membrane-permeant weak base that initially accumulates in low-pH compartments. We have used acridine orange accumulation in conjunction with confocal laser scanning microscopy of toxin-treated cells to begin probing the nature and origin of these vacuoles.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

Sign in / Sign up

Export Citation Format

Share Document