scholarly journals Adaptor Scaffoldins: An Original Strategy for Extended Designer Cellulosomes, Inspired from Nature

mBio ◽  
2016 ◽  
Vol 7 (2) ◽  
Author(s):  
Johanna Stern ◽  
Sarah Moraïs ◽  
Raphael Lamed ◽  
Edward A. Bayer

ABSTRACTDesigner cellulosomes consist of chimeric cohesin-bearing scaffoldins for the controlled incorporation of recombinant dockerin-containing enzymes. The largest designer cellulosome reported to date is a chimeric scaffoldin that contains 6 cohesins. This scaffoldin represented a technical limit of sorts, since adding another cohesin proved problematic, owing to resultant low expression levels, instability (cleavage) of the scaffoldin polypeptide, and limited numbers of available cohesin-dockerin specificities—the hallmark of designer cellulosomes. Nevertheless, increasing the number of enzymes integrated into designer cellulosomes is critical, in order to further enhance degradation of plant cell wall material. Adaptor scaffoldins comprise an intermediate type of scaffoldin that can both incorporate various enzymes and attach to an additional scaffoldin. Using this strategy, we constructed an efficient form of adaptor scaffoldin that possesses three type I cohesins for enzyme integration, a single type II dockerin for interaction with an additional scaffoldin, and a carbohydrate-binding module for targeting to the cellulosic substrate. In parallel, we designed a hexavalent scaffoldin capable of connecting to the adaptor scaffoldin by the incorporation of an appropriate type II cohesin. The resultant extended designer cellulosome comprised 8 recombinant enzymes—4 xylanases and 4 cellulases—thereby representing a potent enzymatic cocktail for solubilization of natural lignocellulosic substrates. The contribution of the adaptor scaffoldin clearly demonstrated that proximity between the two scaffoldins and their composite set of enzymes is crucial for optimized degradation. After 72 h of incubation, the performance of the extended designer cellulosome was determined to be approximately 70% compared to that of native cellulosomes.IMPORTANCEPlant cell wall residues represent a major source of renewable biomass for the production of biofuels such as ethanol via breakdown to soluble sugars. The natural microbial degradation process, however, is inefficient for achieving cost-effective processes in the conversion of plant-derived biomass to biofuels, either from dedicated crops or human-generated cellulosic wastes. The accumulation of the latter is considered a major environmental pollutant. The development of designer cellulosome nanodevices for enhanced plant cell wall degradation thus has major impacts in the fields of environmental pollution, bioenergy production, and biotechnology in general. The findings reported in this article comprise a true breakthrough in our capacity to produce extended designer cellulosomes via synthetic biology means, thus enabling the assembly of higher-order complexes that can supersede the number of enzymes included in a single multienzyme complex.

1993 ◽  
Vol 69 (1) ◽  
pp. 189-197 ◽  
Author(s):  
D. F. Gray ◽  
M. A. Eastwood ◽  
W. G. Brydon ◽  
S. C. Fry

A 14C-Iabelled plant cell wall preparation (I4C-PCW) produced from spinach (Spinacia oleracea L.) cell culture exhibits uniform labelling of the major polysaccharide groups (%): pectins 53, hemicellulose 13, cellulose 21, starch 3. This 14C-PCW preparation has been used in rat studies as a marker for plant cell wall metabolism. Metabolism of the 14C-PCW occurred largely over the first 24 h. This was due to fermentation in the caecum. The pectic fraction of the plant cell walls was degraded completely in the rat gastrointestinal tract, but some [14C-]cellulose was still detected after 24 h in the colon. Of the 14C,22% was recovered in the host liver, adipose tissue and skin, 26% excreted as 14CO2 and up to 18%was excreted in the faeces. There was no urinary excretion of 14C. In vitro fermentation using a caecal inocuium showed reduced 14CO2 production, 12% compared with 26% in the intact rat. 14C-PCW is auseful marker to investigate the fate of plant cell wall materials in the gastrointestinal tract. These studies show both bacterial fermentation of the 14C-PCW and host metabolism of the 14C-labelled fermentation products.


mBio ◽  
2015 ◽  
Vol 6 (5) ◽  
Author(s):  
James P. Craig ◽  
Samuel T. Coradetti ◽  
Trevor L. Starr ◽  
N. Louise Glass

ABSTRACTFungal deconstruction of the plant cell requires a complex orchestration of a wide array of intracellular and extracellular enzymes. InNeurospora crassa, CLR-1, CLR-2, and XLR-1 have been identified as key transcription factors regulating plant cell wall degradation in response to soluble sugars. The XLR-1 regulon was defined using a constitutively active mutant allele, resulting in hemicellulase gene expression and secretion under noninducing conditions. To define genes directly regulated by CLR-1, CLR-2, and XLR-1, we performed chromatin immunoprecipitation and next-generation sequencing (ChIPseq) on epitope-tagged constructs of these three transcription factors. WhenN. crassais exposed to plant cell wall material, CLR-1, CLR-2, and XLR-1 individually bind to the promoters of the most strongly induced genes in their respective regulons. These include promoters of genes encoding cellulases for CLR-1 and CLR-2 (CLR-1/CLR-2) and promoters of genes encoding hemicellulases for XLR-1. CLR-1 bound to its regulon under noninducing conditions; however, this binding alone did not translate into gene expression and enzyme secretion. Motif analysis of the bound genes revealed conserved DNA binding motifs, with the CLR-2 motif matching that of its closest paralog inSaccharomyces cerevisiae, Gal4p. Coimmunoprecipitation studies showed that CLR-1 and CLR-2 act in a homocomplex but not as a CLR-1/CLR-2 heterocomplex.IMPORTANCEUnderstanding fungal regulation of complex plant cell wall deconstruction pathways in response to multiple environmental signals via interconnected transcriptional circuits provides insight into fungus/plant interactions and eukaryotic nutrient sensing. Coordinated optimization of these regulatory networks is likely required for optimal microbial enzyme production.


1997 ◽  
Vol 10 (1) ◽  
pp. 87-94 ◽  
Author(s):  
Haixin Xu ◽  
Kurt Mendgen

Basidiospore germlings of the cowpea rust fungus (Uromyces vignae) penetrate the epidermal cell wall of the nonhost plant Vicia faba. In order to characterize the wall structure of the penetration site, leaves were high pressure frozen, freeze substituted, and embedded in appropriate resins. With antibodies against epitopes present in pectin, polygalacturonic acid, xyloglucan, and callose, we studied the modification of these wall components during infection. The density of epitopes was determined at the penetration site and compared with noninfected areas of the epidermal wall. Along the fungal penetration hypha, a zone of the plant wall, 0.2 μm wide, exhibited a reduced density of pectin and xyloglucan epitopes. A similar reduction of epitope density was also found for xyloglucan after treatment of sections from noninoculated plants with cellulase and xylanase and for pectin after treatment with pectinase. The density of polygalacturonic acid epitopes remained unchanged in the outer layer of the epidermal wall, but increased over the inner layer. A high density of polygalacturonic acid epitopes was found over a collarlike wall apposition produced by the plant cell along the penetration hypha. These results indicate that the fungus degrades the plant cell wall at the penetration site and that the plant cell secretes new wall material into this area to form the wall apposition.


2010 ◽  
Vol 332 (1-2) ◽  
pp. 319-330 ◽  
Author(s):  
J. Bernhard Wehr ◽  
F. Pax C. Blamey ◽  
Peter M. Kopittke ◽  
Neal W. Menzies

2020 ◽  
Vol 86 (8) ◽  
Author(s):  
Chiaki Hori ◽  
Ruopu Song ◽  
Kazuki Matsumoto ◽  
Ruy Matsumoto ◽  
Benjamin B. Minkoff ◽  
...  

ABSTRACT Wood-devastating insects utilize their symbiotic microbes with lignocellulose-degrading abilities to extract energy from recalcitrant woods. It is well known that free-living lignocellulose-degrading fungi secrete various carbohydrate-active enzymes (CAZymes) to degrade plant cell wall components, mainly cellulose, hemicellulose, and lignin. However, CAZymes from insect-symbiotic fungi have not been well documented except for a few examples. In this study, an insect-associated fungus, Daldinia decipiens oita, was isolated as a potential symbiotic fungus of female Xiphydria albopicta captured from Hokkaido forest. This fungus was grown in seven different media containing a single carbon source, glucose, cellulose, xylan, mannan, pectin, poplar, or larch, and the secreted proteins were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). A total of 128 CAZymes, including domains of 92 glycoside hydrolases, 15 carbohydrate esterases, 5 polysaccharide lyases, 17 auxiliary activities, and 11 carbohydrate-binding modules, were identified, and these are involved in degradation of cellulose and hemicellulose but not lignin. Together with the results of polysaccharide-degrading activity measurements, we concluded that D. decipiens oita tightly regulates the expression of these CAZymes in response to the tested plant cell wall materials. Overall, this study described the detailed proteomic approach of a woodwasp-associated fungus and revealed that the new isolate, D. decipiens oita, secretes diverse CAZymes to efficiently degrade lignocellulose in the symbiotic environment. IMPORTANCE Recent studies show the potential impacts of insect symbiont microbes on biofuel application with regard to their degradation capability of a recalcitrant plant cell wall. In this study, we describe a novel fungal isolate, D. decipiens oita, as a single symbiotic fungus from the Xiphydria woodwasp found in the northern forests of Japan. Our detailed secretome analyses of D. decipiens oita, together with activity measurements, reveal that this insect-associated fungus exhibits high and broad activities for plant cell wall material degradation, suggesting potential applications within the biomass conversion industry for plant mass degradation.


1983 ◽  
Vol 34 (3) ◽  
pp. 307 ◽  
Author(s):  
JK Egan ◽  
GR Pearce ◽  
PT Doyle ◽  
R Thomas

In two experiments, estimates of the quantity and composition of digesta in the reticula-rumen of sheep given a roughage diet were made using a recently published marker technique. These estimates were compared with measurements made on the same sheep at slaughter. Estimates of digesta dry matter were influenced by the method of obtaining digesta samples from the rumen. When samples were withdrawn through a plastic tube, the resultant estimates underestimated the values obtained at slaughter by an average of 6%. An alternative sampling procedure is described which provided estimates within 1.5 % of values at slaughter. Values obtained for the organic matter, plant cell wall, and nitrogen content of digesta were similar for the slaughter method and the marker technique, irrespective of the method of sampling. In both experiments, the marker technique consistently underestimated the quantity of water in the rumen by 2-19 %. The importance of measures made on digesta load in the reticulo-rumen is illustrated by an examination of the variability between sheep in digestion of plant cell wall material.


1977 ◽  
Vol 28 (4) ◽  
pp. 651 ◽  
Author(s):  
WR McManus ◽  
VNE Robinson ◽  
LL Grout

Data are advanced to show that controlled ashing of plant cell wall material at 500°C for 3 hr provides a convenient method of removing organic matter and permits visual study of mineral material within the plant structure. Evaluation of a range of mature tropical and temperate grass and legume forage species with the scanning electron microscope has shown the existence of a mineralized component over the cell walls. This component is distributed in sheets of thickness varying upwards from c. 0.1 µm and is located on the outer surface of cell walls, possibly constituting a masking layer around digestible organic material of the cell wall. Energy-dispersive X-ray analysis shows the major elements constituting this mineral layer to be phosphorus, calcium, sulphur and potassium.


2001 ◽  
Vol 7 (6) ◽  
pp. 473-478 ◽  
Author(s):  
I. Perez-Munuera ◽  
D. F. Lewis ◽  
M. A. Lluch

Xixona turrón [Xixona nougat] is a typical Spanish confectionery product made still according to the traditional craft method. This work analyzed the microstructural changes during Xixona turrón manufacture by light microscopy. Different sample preparation methods provided useful complementary information for the understanding of the Xixona turrón structure. A progressively closer contact between a ‘‘sugar phase’’ and a ‘‘fat phase’’ is observed during processing. Inside these phases were immersed many protein bodies and a lot of cellular debris from almond tissue. At the initial stages of mixing the toasted almond paste with the sugar and honey mass, the lipid and sugar phases were relatively discrete. However, as the process developed, the relatively large aerated sugar particles, and to some extent the almond cell debris and protein bodies, were trapped within the lipid phase. In the step when the paste is heated at 65°C, gently stirred, the sugar and plant cell wall material tended to become more finely dispersed. The finished product seemed to consist of twin continuous phases in which the sugar, plant cell wall and protein bodies have formed a ‘‘sugar phase’’ that is infiltrated by the lipid fraction or ‘‘fat phase’’. This structure could contribute to the relatively ‘‘crispy’’ texture of Xixona turrón although the ‘‘oily’’ feel of the product clearly stated that the lipid phase was not extensively encapsulated in the product.


2009 ◽  
Vol 26 (9) ◽  
pp. 1235-1246 ◽  
Author(s):  
Bent Larsen Petersen ◽  
Jack Egelund ◽  
Iben Damager ◽  
Kirsten Faber ◽  
Jacob Krüger Jensen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document