Integration of tectonic, sedimentary, and geohydrologic processes leading to a small-scale extension model for the Mormon Mountains area north of Lake Mead, Lincoln County, Nevada

Ratcheting fatigue loading arises from the superposition of elastic cyclic loads and monotonically increasing mean strains well into the plastic domain, resulting in simultaneous tearing and fatigue of initial welding flaws. The ratcheting loads may be due to thermal gradients set by startups and shutdowns or by soil uplifts and settlements. Under these conditions, fatigue and fracture phenomena could interact, accelerating the extension of initial fabrication flaws above that predicted to occur by either mechanism acting alone. Evaluation of ratcheting fatigue behavior will impact the weld inspection criteria that ensure pipeline integrity. A previous paper [Gioielli, et al ’08] described a model that evaluates 1) tearing based on applied elastic-plastic driving force (J) versus tearing resistance obtained from standard J-R curve tests and 2) tearing-fatigue based on an extension of Paris law re-expressed in terms of an effective ΔJ instead of ΔK enabling it to be extrapolated to the very high growth rates encountered in the elasto-plastic regime. The model was successfully calibrated to small-scale tests. This paper extends the model calibration to large-scale welded pipe tests subjected to cyclic tensile loads while internally pressurized. To that end, 1) new J solutions were developed for pressurized pipes under load-controlled conditions, and 2) comparisons were made of predicted flaw extensions to those obtained experimentally from full-scale tests. The model predictions using average tensile properties and SENT-based tearing resistance of flaw extensions compared favorably to those measured in the large-scale tests, but additional tests are needed before the model can be used in design.

Download Full-text

Geochemistry and Petrogenetic Relationships Between Pegmatites and Host Rocks in the Keffi Area, North Central, Nigeria

European Journal of Engineering Research and Science ◽

10.24018/ejers.2021.6.2.774 ◽

2021 ◽

Vol 6 (2) ◽

pp. 42-49

Author(s):

I. Y. Tanko ◽

K. Dzigbodi-Adjimah

Keyword(s):

Partial Melting ◽

Systematic Study ◽

Genetic Model ◽

Small Scale ◽

North Central ◽

The North ◽

Rock Types ◽

Tectonic Environment ◽

Area North ◽

Host Rocks

Keffi pegmatites area which contains numerous mineralised and non-mineralised pegmatites lie between the Wamba pegmatite field to the NE and Nasarawa pegmatite field to the SW on the North Central Pegmatite belt of Nigeria. In Keffi area exploitation of deposits is currently being done by small scale miners, whose activities are haphazard and uncoordinated, because of that information on the geology and petrology that will enable a systematic study of the pegmatites in the area is scanty. Systematic geochemical investigations of the pegmatites and surrounding host rocks aimed at establishing petrogenetic relationships amongst the various rock types in the area were conducted. Major, trace and REE investigations of the pegmatites and associated granitoids have indicated petrogenetic relationships amongst the pegmatites and between the pegmatites and surrounding granitoids of Keffi area. Also, the variation diagram of major, trace and REE in whole rocks and K-feldspar samples show patterns which categorised the pegmatites of Keffi area into; (1) Non-mineralised, (2) intermediate and (3) mineralised pegmatites. It was also deduced from the geochemical characteristics (variation diagrams in major and trace element, REE geochemistry and tectonic environment classification) that a genetic model based on the evolution of melt by partial melting of metasedimentary protolith during ultrametamorphic and deformational activities (anatexis) is proposed for the granite-pegmatite system of Keffi area. This information will be useful as guide for fruitful exploration of the pegmatites and serves as model for the exploitation of pegmatite veins in similar geologic settings.

Download Full-text

Reasons to strike first

Behavioral and Brain Sciences ◽

10.1017/s0140525x19000840 ◽

2019 ◽

Vol 42 ◽

Author(s):

William Buckner ◽

Luke Glowacki

Keyword(s):

Intergroup Conflict ◽

Small Scale

Abstract De Dreu and Gross predict that attackers will have more difficulty winning conflicts than defenders. As their analysis is presumed to capture the dynamics of decentralized conflict, we consider how their framework compares with ethnographic evidence from small-scale societies, as well as chimpanzee patterns of intergroup conflict. In these contexts, attackers have significantly more success in conflict than predicted by De Dreu and Gross's model. We discuss the possible reasons for this disparity.

Download Full-text

Exploring Coronal Structures with SOHO

International Astronomical Union Colloquium ◽

10.1017/s0252921100064915 ◽

2000 ◽

Vol 179 ◽

pp. 403-406

Author(s):

M. Karovska ◽

B. Wood ◽

J. Chen ◽

J. Cook ◽

R. Howard

Keyword(s):

Solar Corona ◽

Image Enhancement ◽

Coronal Mass Ejections ◽

Dynamical Evolution ◽

Small Scale ◽

Low Contrast ◽

Contrast Structures ◽

Scale Structures ◽

Small Scale Structures ◽

Coronal Structures

AbstractWe applied advanced image enhancement techniques to explore in detail the characteristics of the small-scale structures and/or the low contrast structures in several Coronal Mass Ejections (CMEs) observed by SOHO. We highlight here the results from our studies of the morphology and dynamical evolution of CME structures in the solar corona using two instruments on board SOHO: LASCO and EIT.

Download Full-text

Scanning tunneling microscopy and atomic force microscopy: New tools for biology

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100155864 ◽

1989 ◽

Vol 47 ◽

pp. 778-779

Author(s):

CE Bracker ◽

P. K. Hansma

Keyword(s):

Physical Property ◽

Scanning Probe ◽

Scanning Tunneling ◽

Small Scale ◽

Tunneling Microscopy ◽

Force Microscopy ◽

New Family ◽

Small Probe ◽

Atomic Force ◽

Transmission Electron

A new family of scanning probe microscopes has emerged that is opening new horizons for investigating the fine structure of matter. The earliest and best known of these instruments is the scanning tunneling microscope (STM). First published in 1982, the STM earned the 1986 Nobel Prize in Physics for two of its inventors, G. Binnig and H. Rohrer. They shared the prize with E. Ruska for his work that had led to the development of the transmission electron microscope half a century earlier. It seems appropriate that the award embodied this particular blend of the old and the new because it demonstrated to the world a long overdue respect for the enormous contributions electron microscopy has made to the understanding of matter, and at the same time it signalled the dawn of a new age in microscopy. What we are seeing is a revolution in microscopy and a redefinition of the concept of a microscope.Several kinds of scanning probe microscopes now exist, and the number is increasing. What they share in common is a small probe that is scanned over the surface of a specimen and measures a physical property on a very small scale, at or near the surface. Scanning probes can measure temperature, magnetic fields, tunneling currents, voltage, force, and ion currents, among others.

Download Full-text

Superstructures and ordering phenomena in ceramic superconductors

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100166014 ◽

1996 ◽

Vol 54 ◽

pp. 710-711

Author(s):

R. Gronsky

Keyword(s):

Domain Growth ◽

Small Displacement ◽

Small Scale ◽

Ceramic Superconductors ◽

Oxygen Sublattices ◽

Tweed Contrast ◽

Diffraction Patterns ◽

Representative Image ◽

Static Lattice ◽

Modulation Wavelength

It is now well established that the phase transformation behavior of YBa2Cu3O6+δ is significantly influenced by matrix strain effects, as evidenced by the formation of accommodation twins, the occurrence of diffuse scattering in diffraction patterns, the appearance of tweed contrast in electron micrographs, and the generation of displacive modulation superstructures, all of which have been successfully modeled via simple Monte Carlo simulations. The model is based upon a static lattice formulation with two types of excitations, one of which is a change in oxygen occupancy, and the other a small displacement of both the copper and oxygen sublattices. Results of these simulations show that a displacive superstructure forms very rapidly in a morphology of finely textured domains, followed by domain growth and a more sharply defined modulation wavelength, ultimately evolving into a strong <110> tweed with 5 nm to 7 nm period. What is new about these findings is the revelation that both the small-scale deformation superstructures and coarser tweed morphologies can result from displacive modulations in ordered YBa2Cu3O6+δ and need not be restricted to domain coarsening of the disordered phase. Figures 1 and 2 show a representative image and diffraction pattern for fully-ordered (δ = 1) YBa2Cu3O6+δ associated with a long-period <110> modulation.

Download Full-text

Indirect Assessment of Attitudes with Response-Time-Based Measures

Zeitschrift für Sozialpsychologie ◽

10.1024/0044-3514.37.3.131 ◽

2006 ◽

Vol 37 (3) ◽

pp. 131-139 ◽

Cited By ~ 15

Author(s):

Juliane Degner ◽

Dirk Wentura ◽

Klaus Rothermund

Keyword(s):

Social Cognitive ◽

Incremental Validity ◽

Self Report ◽

Small Scale ◽

Implicit Measures ◽

Scale Theory ◽

Starting Point ◽

Self Reports ◽

Predicting Behavior ◽

Social Cognitive Theories

Abstract: We review research on response-latency based (“implicit”) measures of attitudes by examining what hopes and intentions researchers have associated with their usage. We identified the hopes of (1) gaining better measures of interindividual differences in attitudes as compared to self-report measures (quality hope); (2) better predicting behavior, or predicting other behaviors, as compared to self-reports (incremental validity hope); (3) linking social-cognitive theories more adequately to empirical research (theory-link hope). We argue that the third hope should be the starting point for using these measures. Any attempt to improve these measures should include the search for a small-scale theory that adequately explains the basic effects found with such a measure. To date, small-scale theories for different measures are not equally well developed.

Download Full-text