Spirocyclization of Isatin with Chiral α-Aminothiols: Diastereoselective Synthesis of (-)- and (+)-4'-(Methoxycarbonyl)spiro[indoline-3,2'-thiazolidin]-2-one

2000 ◽  
Vol 65 (3) ◽  
pp. 425-433 ◽  
Author(s):  
Peter Kutschy ◽  
Mojmír Suchý ◽  
Milan Dzurilla ◽  
Pavel Pazdera ◽  
Mitsuo Takasugi ◽  
...  
Keyword(s):  
Spectral Methods ◽  
Room Temperature ◽  
Side Product ◽  
Diastereoselective Synthesis ◽  
Reaction Conditions ◽  
Decomposition Products ◽  
X Ray ◽  
X Ray Crystallography

Reactions of isatin with chiral α-aminothiols have been studied. With L-cysteine, only decomposition products were formed under various reaction conditions, whereas D- and L-penicillamine afforded mixtures of diastereomeric 4'-carboxy-5',5'-dimethylspiro[indoline- 3,2'-thiazolidin]-2-ones (4a and 4b or 5a and 5b) in the ratio 1 : 1. The reaction of isatin with methyl L- and D-cysteinates under mild reaction conditions (methanol-benzene, room temperature) proceeded diastereoselectively with the formation of (-)- and (+)-4'-(methoxycarbonyl)spiro[indoline-3,2'-thiazolidin]-2-one (6a and 8) in 38 and 30% yields, respectively. Optically inactive 4'-(methoxycarbonyl)spiro[indoline-3,2'-([2',5']dihydrothiazol)]-2-one (7) was isolated as a side product in 7 and 3% yield, respectively. Structure of the obtained products was determined by spectral methods, including NOE difference measurements and by X-ray crystallography.

scholarly journals Heterocyclic Hypervalent Iodine(III) Compounds with Fused Benziodazole and Tetrazole Rings (I-Substituted Tetrazolo[1,5-b][1,2]Benziodazoles)

2020 ◽  
Author(s):  
Rajesh Kumar ◽  
Kapil Dev Sayala ◽  
Lejla Lejla Camdzic ◽  
Maxime Siegler ◽  
Avichal Vaish ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hypervalent Iodine ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Reaction Conditions ◽  
Thermal Stabilities ◽  
X Ray ◽  
X Ray Crystallography ◽  
Derivatives Of ◽  
C Nmr

A series of heterocyclic hypervalent (HV) iodine(III) compounds containing fused tetrazole and benziodazole rings, i.e., derivatives of benziodazolotetrazole (BIAT) with various ligands (L) attached to the iodine atom (BIAT-L) were prepared and studied. They were characterized by <sup>1</sup>H and <sup>13</sup>C NMR spectroscopy, ESI-HRMS, and X-ray crystallography. The thermal stabilities of all BIAT derivatives (L= Cl, OH, OAc, OMe) were studied and the degradation patterns as well as the enthalpies of degradation were measured by thermal gravimetric analysis coupled with differential scanning calorimetry. The reaction of various alkenes with BIAT-Cl in the presence of Cu(OTf)<sub>2</sub> at room temperature yielded chloro-tetrazolylated products. The oxidation of thioanisole with BIAT-Cl under various reaction conditions is also reported.

scholarly journals Heterocyclic Hypervalent Iodine(III) Compounds with Fused Benziodazole and Tetrazole Rings (I-Substituted Tetrazolo[1,5-b][1,2]Benziodazoles)

2020 ◽  
Author(s):  
Rajesh Kumar ◽  
Kapil Dev Sayala ◽  
Lejla Lejla Camdzic ◽  
Maxime Siegler ◽  
Avichal Vaish ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hypervalent Iodine ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Reaction Conditions ◽  
Thermal Stabilities ◽  
X Ray ◽  
X Ray Crystallography ◽  
Derivatives Of ◽  
C Nmr

A series of heterocyclic hypervalent (HV) iodine(III) compounds containing fused tetrazole and benziodazole rings, i.e., derivatives of benziodazolotetrazole (BIAT) with various ligands (L) attached to the iodine atom (BIAT-L) were prepared and studied. They were characterized by <sup>1</sup>H and <sup>13</sup>C NMR spectroscopy, ESI-HRMS, and X-ray crystallography. The thermal stabilities of all BIAT derivatives (L= Cl, OH, OAc, OMe) were studied and the degradation patterns as well as the enthalpies of degradation were measured by thermal gravimetric analysis coupled with differential scanning calorimetry. The reaction of various alkenes with BIAT-Cl in the presence of Cu(OTf)<sub>2</sub> at room temperature yielded chloro-tetrazolylated products. The oxidation of thioanisole with BIAT-Cl under various reaction conditions is also reported.

Naturally Occurring Organic Acid-catalyzed Facile Diastereoselective Synthesis of Biologically Active (E)-3-(arylimino)indolin-2-one Derivatives in Water at Room Temperature

2019 ◽  
Vol 23 (16) ◽  
pp. 1778-1788 ◽  
Author(s):  
Gurpreet Kaur ◽  
Arvind Singh ◽  
Kiran Bala ◽  
Mamta Devi ◽  
Anjana Kumari ◽  
...  
Keyword(s):  
Room Temperature ◽  
Biologically Active ◽  
Environmentally Benign ◽  
Diastereoselective Synthesis ◽  
Substituted Anilines ◽  
Reaction Conditions ◽  
Naturally Occurring ◽  
Acid Catalyzed ◽  
Reaction Media ◽  
Column Chromatographic

A simple, straightforward and efficient method has been developed for the synthesis of (E)-3-(arylimino)indolin-2-one derivatives and (E)-2-((4-methoxyphenyl)imino)- acenaphthylen-1(2H)-one. The synthesis of these biologically-significant scaffolds was achieved from the reactions of various substituted anilines and isatins or acenaphthaquinone, respectively, using commercially available, environmentally benign and naturally occurring organic acids such as mandelic acid or itaconic acid as catalyst in aqueous medium at room temperature. Mild reaction conditions, energy efficiency, good to excellent yields, environmentally benign conditions, easy isolation of products, no need of column chromatographic separation and the reusability of reaction media are some of the significant features of the present protocol.

One-pot Synthesis of Pyrazolone Sulfones by Iodine-catalyzed Sulfenylation of Pyrazolones with Aryl Sulfonyl Hydrazides Followed by Oxidation in Water

2018 ◽  
Vol 15 (3) ◽  
pp. 380-387
Author(s):  
Xia Zhao ◽  
Xiaoyu Lu ◽  
Lipeng Zhang ◽  
Tianjiao Li ◽  
Kui Lu
Keyword(s):  
Double Bond ◽  
Efficient Method ◽  
Room Temperature ◽  
Sulfonyl Chloride ◽  
Antibacterial Activities ◽  
Oxidation Reactions ◽  
Reaction Conditions ◽  
One Pot ◽  
X Ray ◽  
Amide Form

Aim and Objective: Pyrazolone sulfones have been reported to exhibit herbicidal and antibacterial activities. In spite of their good bioactivities, only a few methods have been developed to prepare pyrazolone sulfones. However, the substrate scope of these methods is limited. Moreover, the direct sulfonylation of pyrazolone by aryl sulfonyl chloride failed to give pyrazolone sulfones. Thus, developing a more efficient method to synthesize pyrazolone sulfones is very important. Materials and Method: Pyrazolone, aryl sulphonyl hydrazide, iodine, p-toluenesulphonic acid and water were mixed in a sealed tube, which was heated to 100°C for 12 hours. The mixture was cooled to 0°C and m-CPBA was added in batches. The mixture was allowed to stir for 30 min at room temperature. The crude product was purified by silica gel column chromatography to afford sulfuryl pyrazolone. Results: In all cases, the sulfenylation products were formed smoothly under the optimized reaction conditions, and were then oxidized to the corresponding sulfones in good yields by 3-chloroperoxybenzoic acid (m-CPBA) in water. Single crystal X-ray analysis of pyrazolone sulfone 4aa showed that the major tautomer of pyrazolone sulfones was the amide form instead of the enol form observed for pyrazolone thioethers. Moreover, the C=N double bond isomerized to form an α,β-unsaturated C=C double bond. Conclusion: An efficient method to synthesize pyrazolone thioethers by iodine-catalyzed sulfenylation of pyrazolones with aryl sulfonyl hydrazides in water was developed. Moreover, this method was employed to synthesize pyrazolone sulfones in one-pot by subsequent sulfenylation and oxidation reactions.

Synthesis, structural characterization and catalytic activity of chlororuthenium(II) complexes with substituted Schiff base/phosphine ancillary ligands

2020 ◽  
Vol 75 (9-10) ◽  
pp. 851-857
Author(s):  
Chong Chen ◽  
Fule Wu ◽  
Jiao Ji ◽  
Ai-Quan Jia ◽  
Qian-Feng Zhang
Keyword(s):  
Schiff Base ◽  
Catalytic Activity ◽  
Structural Characterization ◽  
Room Temperature ◽  
Molecular Structures ◽  
Cationic Complex ◽  
Neutral Complex ◽  
Ancillary Ligands ◽  
X Ray ◽  
X Ray Crystallography

AbstractTreatment of [(η6-p-cymene)RuCl2]2 with one equivalent of chlorodiphenylphosphine in tetrahydrofuran at reflux afforded a neutral complex [(η6-p-cymene)RuCl2(κ1-P-PPh2OH)] (1). Similarly, the reaction of [Ru(bpy)2Cl2·2H2O] (bpy = 2,2′-bipyridine) and chlorodiphenylphosphine in methanol gave a cationic complex [Ru(bpy)2Cl(κ1-P-PPh2OCH3)](PF6) (2), while treatment of [RuCl2(PPh3)3] with [2-(C5H4N)CH=N(CH2)2N(CH3)2] (L1) in tetrahydrofuran at room temperature afforded a ruthenium(II) complex [Ru(PPh3)Cl2(κ3-N,N,N-L1)] (3). Interaction of the chloro-bridged complex [Ru(CO)2Cl2]n with one equivalent of [Ph2P(o-C6H4)CH=N(CH2)2N(CH3)2] (L2) led to the isolation of [Ru(CO)Cl2(κ3-P,N,N-L2)] (4). The molecular structures of the ruthenium(II) complexes 1–4 have been determined by single-crystal X-ray crystallography. The properties of the ruthenium(II) complex 4 as a hydrogenation catalyst for acetophenone were also tested.

scholarly journals Silylated gallium and indium chalcogenide ring systems as potential precursors to ME (E=O, S) materials

2013 ◽  
Vol 11 (7) ◽  
pp. 1225-1238
Author(s):  
Iliana Medina-Ramírez ◽  
Cynthia Floyd ◽  
Joel Mague ◽  
Mark Fink
Keyword(s):  
Thermal Decomposition ◽  
Room Temperature ◽  
Membered Ring ◽  
Molecular Structures ◽  
Nmr Studies ◽  
X Ray ◽  
X Ray Crystallography ◽  
High Yields ◽  
Vt Nmr ◽  
State 1

AbstractThe reaction of R3M (M=Ga, In) with HESiR′3 (E=O, S; R′3=Ph3, iPr3, Et3, tBuMe2) leads to the formation of (Me2GaOSiPh3)2(1); (Me2GaOSitBuMe2)2(2); (Me2GaOSiEt3)2(3); (Me2InOSiPh3)2(4); (Me2InOSitBuMe2)2(5); (Me2InOSiEt3)2(6); (Me2GaSSiPh3)2(7); (Et2GaSSiPh3)2(8); (Me2GaSSiiPr3)2(9); (Et2GaSSiiPr3)2(10); (Me2InSSiPh3)3(11); (Me2InSSiiPr3)n(12), in high yields at room temperature. The compounds have been characterized by multinuclear NMR and in most cases by X-ray crystallography. The molecular structures of (1), (4), (7) and (8) have been determined. Compounds (3), (6) and (10) are liquids at room temperature. In the solid state, (1), (4), (7) and (9) are dimers with central core of the dimer being composed of a M2E2 four-membered ring. VT-NMR studies of (7) show facile redistribution between four- and six-membered rings in solution. The thermal decomposition of (1)–(12) was examined by TGA and range from 200 to 350°C. Bulk pyrolysis of (1) and (2) led to the formation of Ga2O3; (4) and (5) In metal; (7)–(10) GaS and (11)–(12) InS powders, respectively.

scholarly journals Rational synthesis of an atomically precise carboncone under mild conditions

2019 ◽  
Vol 5 (8) ◽  
pp. eaaw0982 ◽  
Author(s):  
Zheng-Zhong Zhu ◽  
Zuo-Chang Chen ◽  
Yang-Rong Yao ◽  
Cun-Hao Cui ◽  
Shu-Hui Li ◽  
...  
Keyword(s):  
Apex Angle ◽  
Facile Synthesis ◽  
Reaction Conditions ◽  
X Ray ◽  
Carbon Allotropes ◽  
X Ray Crystallography ◽  
Mild Conditions ◽  
Research Opportunity ◽  
Insight Into ◽  
Structural Strain

Carboncones, a special family of all-carbon allotropes, are predicted to have unique properties that distinguish them from fullerenes, carbon nanotubes, and graphenes. Owing to the absence of methods to synthesize atomically well-defined carboncones, however, experimental insight into the nature of pure carboncones has been inaccessible. Herein, we describe a facile synthesis of an atomically well-defined carboncone[1,2] (C70H20) and its soluble penta-mesityl derivative. Identified by x-ray crystallography, the carbon skeleton is a carboncone with the largest possible apex angle. Much of the structural strain is overcome in the final step of converting the bowl-shaped precursor into the rigid carboncone under mild reaction conditions. This work provides a research opportunity for investigations of atomically precise single-layered carboncones having even higher cone walls and/or smaller apex angles.

Plug-and-play polymer microfluidic chips for hydrated, room temperature, fixed-target serial crystallography

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Deepshika Gilbile ◽  
Megan L. Shelby ◽  
Artem Y. Lyubimov ◽  
Jennifer L. Wierman ◽  
Diana C. F. Monteiro ◽  
...  
Keyword(s):  
Room Temperature ◽  
Microfluidic Chips ◽  
Fixed Target ◽  
Plug And Play ◽  
X Ray ◽  
X Ray Crystallography ◽  
Serial Crystallography

This work presents our development of versatile, inexpensive, and robust polymer microfluidic chips for routine and reliable room temperature serial X-ray crystallography measurements.

scholarly journals Synthesis, Crystal Structures and Luminescence Properties of Three New Cadmium 3D Coordination Polymers

Molecules ◽  
2020 ◽  
Vol 25 (11) ◽  
pp. 2465
Author(s):  
Hai-Yan Ju ◽  
Gang Zhang ◽  
Ming Yang ◽  
De-Zheng Liu ◽  
Yong-Sheng Yang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Coordination Complexes ◽  
Luminescence Properties ◽  
Solvothermal Reaction ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Π Stacking Interaction ◽  
2D Network ◽  
3D Framework

The new rigid planar ligand 2,5-bis(3-(pyridine-4-yl)phenyl)thiazolo[5,4-d]thiazole (BPPT) has been synthesized, which is an excellent building block for assembling coordination polymer. Under solvothermal reaction conditions, cadmium ion with BPPT in the presence of various carboxylic acids including (1,1′-biphenyl)-4,4′-dicarboxylic acid (BPDC), isophthalic acid (IP), and benzene-1,3,5-tricarboxylic acid (BTC) gave rise to three coordination complexes, viz, [Cd(BPPT)(BPDA)](BPPT)n (1), [Cd(BPPT) (IP)] (CH3OH) (2), and [Cd3(BPPT)3(BTC)2(H2O)2] (3). The structures of 1, 2, and 3 were characterized by single crystal X-ray diffraction. The IR spectra as well as thermogravimetric and luminescence properties were also investigated. Complex 1 is a two-dimensional (2D) network and further stretched to a 3D supramolecular structure through π–π stacking interaction. The complexes 2 and 3 show 3D framework. The complexes 1, 2, and 3 exhibited luminescence property at room temperature.

Sign in / Sign up

Export Citation Format

Share Document